DS120 LUMILEDS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 17

Technical content

No. E352519 DS120 LUXEON Z Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved. LUXEON Z is a high power 1.3mm x 1.7mm LED that enables never before seen color consistency, luminance, flux density and design flexibility for lighting solutions. LUXEON Z is undomed, a feature that provides un- matched optical flexibility for precise beam angle control. Tested and binned at application conditions 85°C and available in 3- and 5-step MacAdam ellipse color bins. LUXEON Z emitters are an ideal choice for indoor and outdoor light sources requiring superior beam angles, higher efficacy and lower costs. LUXEON Z Industry’s smallest high power emitter for use in close-packed applications requiring an undomed solution FEATURES AND BENEFITS PRIMARY APPLICATIONS 1.3mm x 1.7mm micro footprint enables a high degree of design flexibility Architectural Undomed design allows precise optical control Downlights 1A max drive current allows for more flux per LED Indoor Area Lighting 3- and 5-step MacAdam ellipse color binning for superior Quality of Light Lamps Outdoor Specialty Lighting Spotlights

DS120 LUXEON Z Product Datasheet 20170327 ©2017 Lumileds Holding B.V. All rights reserved. i Table of Contents

DS120 LUXEON Z Product Datasheet 20170327 ©2017 Lumileds Holding B.V. All rights reserved. 2 General Product Information Product Test Conditions LUXEON Z LEDs are tested and binned with a DC drive current of 500mA at a junction temperature, Tj, of 85ºC. Part Number Nomenclature Part numbers for LUXEON Z follow the convention below: L X Z 1 – A A B B – C Where: A A – designates nominal ANSI CCT (27=2700K, 30=3000K, 35=3500K, 40=4000K, 50=5000K, 57=5700K, 65=6500K RB=Royal Blue) B B – designates minimum CRI (65=65CRI, 70=70CRI, 80=80CRI) C – designates SDCM (3=3 SDCM, 5=5 SDCM). Therefore, the following part number is used for a LUXEON Z 3000K, 80 CRI, 5 SDCM : L X Z 1 – 3 0 8 0 – 5 Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long- term performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Z is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).

DS120 LUXEON Z Product Datasheet 20170327 ©2017 Lumileds Holding B.V. All rights reserved. 3 Performance Characteristics Product Selection Guide Table 1 . Product performance of LUXEON Z at 500mA and 700mA, T j=85ºC . NOMINAL CCT MINIMUM CRI [1, 2] LUMINOUS FLUX [1] (lm) TYPICAL LUMINOUS EFFICACY (lm/W) TYPICAL LUMINOUS FLUX (lm) TYPICAL LUMINOUS EFFICACY (lm/W) PART NUMBERMINIMUM TYPICAL 500mA 700mA 6500K 65 140 154 110 197 99 LXZ1-6565 4000K 70 120 134 96 172 86 LXZ1-4070 5000K 70 130 148 106 189 95 LXZ1-5070 5700K 70 140 152 109 195 98 LXZ1-5770 2700K 80 100 115 82 147 74 LXZ1-2780-y 3000K 80 110 124 89 159 80 LXZ1-3080-y 3500K 80 110 124 89 159 80 LXZ1-3580-y 4000K 80 120 130 93 166 83 LXZ1-4080-y Notes for Table 1: 1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements. 2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed. Optical Characteristics Table 2 . Optical characteristics for LUXEON Z at 500mA, T j=85°C . PART NUMBER TYPICAL TOTAL INCLUDED ANGLE [1] TYPICAL VIEWING ANGLE [2] LXZ1-xxxx-y 160° 120° LXZ1-xxxx 160° 120° Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. Electrical and Thermal Characteristics Table 3 . Electrical and thermal characteristics for LUXEON Z at 500mA, T j=85°C . PART NUMBER FORWARD VOLTAGE [1] (Vf) TYPICAL TEMPERATURE COEFFICIENT OF FORWARD VOLTAGE (mV/°C) [2] TYPICAL THERMAL RESISTANCE — JUNCTION TO SOLDER PAD (°C/W)MINIMUM TYPICAL MAXIMUM LXZ1-xxxx-y 2.5 2.8 3.25 -1.6 6 LXZ1-xxxx 2.5 2.8 3.25 -1.6 6 Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Measured between 25°C and 85°C.

DS120 LUXEON Z Product Datasheet 20170327 ©2017 Lumileds Holding B.V. All rights reserved. 4 Absolute Maximum Ratings Table 4 . Absolute maximum ratings for LUXEON Z . PARAMETER MAXIMUM PERFORMANCE DC Forward Current [1, 2] 1000mA Peak Pulsed Forward Current [1, 3] 1200mA LED Junction Temperature [1] (DC & Pulse) 135°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 3B Operating Case Temperature [1] -40°C to 135°C LED Storage Temperature -40°C to 135°C Soldering Temperature JEDEC 020c 260°C Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias Notes for Table 4: 1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met: – The frequency of the ripple current is 100Hz or higher – The average current for each cycle does not exceed the maximum allowable DC forward current – The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current 3. At 10% duty cycle with pulse of 10ms. Characteristic Curves Spectral Power Distribution Characteristics Figure 1a: Typical normalized power vs. wavelength for LXZ1-xx65 at 500mA, T j=85ºC .

DS120 LUXEON Z Product Datasheet 20170327 ©2017 Lumileds Holding B.V. All rights reserved. 8 Figure 6: Typical polar radiation pattern for LXZ1-xxxx at 500mA, T j=85ºC .

dominant wavelength and forward voltage. particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 5. Luminous flux bin definitions for LUXEON Z.

  1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.

Table 6. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON Z.

  1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.

Table 7. Forward voltage bin definitions for LUXEON Z.

  1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

Figure 7: 3- and 5-step MacAdam ellipse illustration for Table 6. centers are all above Black Body Line (BBL).

DS120 LUXEON Z Product Datasheet 20170327 ©2017 Lumileds Holding B.V. All rights reserved. 11 Mechanical Dimensions Notes for Figure 8: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Figure 8: Mechanical dimensions for LUXEON Z .

Table 8. Reflow profile characteristics for LUXEON Z. Table 9 . Moisture sensitivity levels for LUXEON Z .

1 Unlimited ≤30°C / 85% RH 168 Hours +5 / -0 85°C / 85% RH

Figure 9: Visualization of the acceptable reflow temperature profile as specified in Table 8.

DS120 LUXEON Z Product Datasheet 20170327 ©2017 Lumileds Holding B.V. All rights reserved. 13 Solder Pad Design Notes for Figure 10: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Figure 10: Recommended PCB solder pad layout for LUXEON Z .

DS120 LUXEON Z Product Datasheet 20170327 ©2017 Lumileds Holding B.V. All rights reserved. 14 Packaging Information Pocket Tape Dimensions Notes for Figure 11: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Figure 11: Pocket tape dimensions for LUXEON Z . 4±0.1 1.75±0.1 8+0.3 -0.1 1.75±0.1SPROCKET HOLE Ø1.5±0.1 0.20±0.02 1.50±0.05 0.88±0.05 5° MAX 1.90±0.05 5° MAX

DS120 LUXEON Z Product Datasheet 20170327 ©2017 Lumileds Holding B.V. All rights reserved. 15 Reel Dimensions Notes for Figure 12: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Figure 12: Reel dimensions for LUXEON Z .

Product Datasheet 20170327 ©2017 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. To learn more about our portfolio of light engines, visit lumileds.com.