DS1107SG IRI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

FEATURES

¾ Wide current range ¾ High voltage ratings up to 4000 V ¾ High surge current capabilities ¾ Diffused junction ¾ Hockey PUK version TYPICAL APPLICATIONS ¾ Co nverters ¾ Power supplies ¾ Machine tool controls ¾ High power drives ¾ Medium traction applications INTERNATIONAL STANDARD RECOVERY DIODE (G) VRRM (V) VRSM (V) www.rectifierindia.com April 2011 DS1107SG DEVICE TYPE DS1107SG4040 CURRENT RATINGS Tcase = 75oC unless otherwise stated DS1107SG3838 DS1107SG3636 4000 3800 3600 39 00 3700 4100 Symbol Parameter Conditions Double Side Cooled IF(AV) Mean forward current IF(RMS) RMS value IF Continuous (direct) forward current Single Side Cooled (Anode side) IF(AV) Mean forward current IF(RMS) RMS value IF Continuous (direct) forward current UnitsMax. Half wave resistive load 1121 A - 1761 A - 1608 A Half wave resistive load 734 A - 1154 A - 989 A TECHNICAL DATA A ll data sheet.com

www.rectifierindia.com April 2011 Symbol Parameter Conditions Double Side Cooled IF(AV) Mean forward current IF(RMS) RMS value IF Continuous (direct) forward current Single Side Cooled (Anode side) IF(AV) Mean forward current IF(RMS) RMS value IF Continuous (direct) forward current UnitsMax. Half wave resistive load 870 A - 1366 A - 1280 A Half wave resistive load 550 A - 863 A - 740 A Tcase = 100oC unless otherwise stated SURGE RATINGS Conditions 10ms half sine; Tcase = 150oC VR = 50% VRRM - 1/4 sine 10ms half sine; Tcase = 150oC VR = 0 Max. UnitsSymbol Parameter IFSM Surge (non-repetitive) forward current I2tI 2t for fusing IFSM Surge (non-repetitive) forward current I2t I2t for fusing A2s 15.0 kA 0.72x 106 A2s 12.0 kA 1.125 x 106 THERMAL AND MECHANICAL DATA dc Conditions Min. Max. Units oC/W- 0.064Anode dc Clamping force 12.0kN with mounting compoundThermal resistance - case to heatsinkRth(c-h) 0.008Double side - 150 oC Tvj Virtual junction temperature Tstg Storage temperature range Reverse (blocking) Single side Thermal resistance - junction to caseRth(j-c) Single side cooled Symbol Parameter -55 175 oC Forward (conducting) - 160 oC - 0.016 oC/W oC/W Cathode dc - 0.064 oC/W Double side cooled - 0.032 oC/W Clamping force- 11.5 13.5 kN STANDARD RECOVERY DIODE DS1107SG A ll data sheet.com

www.rectifierindia.com April 2011 CHARACTERISTICS Forward voltage Peak reverse current Parameter μC2000 At Tvj = 150˚C - QS Total stored charge IF = 1000A, dIRR/dt = 3A/μs Tcase = 150˚C, VR = 100V Symbol VFM IRRM Irr Reverse recovery current VTO Threshold voltage rT Slope resistance 0.44 mΩ At Tvj = 150˚C - 0.75 V -8 0A At VRRM, Tcase = 150oC- 50 mA - 1.6 VAt 1800A peak, Tcase = 25oC Conditions Min. Max. Units CURVES Fig.2 Maximum (limit) forward characteristics Fig.3 Dissipation curves VFM Equation:- VFM = A + Bln (IF) + C.IF+D.√IF Where A = 0.616461 B = –0.01452 C = 0.000349 D = 0.009952 these values are valid for Tj = 125˚C for IF 500A to 2500A 0.5 1.0 1.5 2.0 Instantaneous forward voltage, VF - (V) 500 1000 1500 2000 2500Instantaneous forward current, IF - (A) Measured under pulse conditions Tj = 25˚C Tj = 150˚C 0 500 1000 1500 2000 Mean forward current, IF(AV) - (A) 500 1000 1500 2000 2500Mean power dissipation - (W) dc Half wave 3 phase 6 phase STANDARD RECOVERY DIODE DS1107SG A ll data sheet.com

www.rectifierindia.com April 2011 Fig.4 Total stored charge Fig.5 Maximum reverse recovery current Fig.7 Maximum (limit) transient thermal impedance - junction to case Fig.6 Surge (non-repetitive) forward current vs time (with 50% V RRM at T case 150˚C) 0.1 0.01

0.001 Thermal Impedance - junction to case, Rth(j–c) - (˚C/W)

0.001 0.01 0.1 1.0 10 Time - (s) Anode side cooled Double side cooled Conduction d.c. Halfwave 3 phase 120˚ 6 phase 60˚ Effective thermal resistance Junction to case ˚C/W Double side 0.032 0.034 0.044 0.057 Single side 0.064 0.066 0.076 0.089 0.1 1.0 10 100 Rate of decay of on-state current, dIF/dt - (A/µs) 10000 1000 100 Stored charge, QS - (µC) Conditions: Tj = 150˚C VR = 100V IF = 1000A IRM IF dIF/dt QS 0.1 1.0 10 100 Rate of decay of forward current, dIF/dt - (A/µs) 1000 100 Reverse recovery current, Irr - (A) Conditions: Tj = 150˚C VR = 100V IF = 1000A 11 0 1 2 3 5 10 20 50 500 550 450 600 650 I2t value - (A2s x 103) ms Cycles at 50Hz Duration Peak half sine forward current - (kA) I2t = Î2 x t 700 750 I2t STANDARD RECOVERY DIODE DS1107SG A ll data sheet.com

www.rectifierindia.com April 2011 PACKAGE OUTLINE All dimensions are in mm. Hole Ø3.6 x 2.0 deep (in both electrodes) Ø34 nom 27.0 25.4 Cathode AnodeØ34 nom Ø58.5 max Nominal weight: 250g Clamping force: 12kN ±10% Package outine type code: G STANDARD RECOVERY DIODE DS1107SG Plot No 151, Udyog Kendra, Extn.-II, Ecotech-III, Greater Noida-201306 Toll Free No.: 1800 3070 9989 , Fax : 011-27491404 E-mail : insel@rectifierindia.com, sales@rectifierindia.com Insel Rectifiers (India) Pvt. Ltd. (An ISO 9001:2015, ISO 14001:2015 Certified Company) A ll data sheet.com