DS11-1Y MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Catalog DS11-TBD Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 1-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 © 2004 by Tyco Electronics Corporation. All Rights Reserved. CII and TYCO are trademarks. DS11 Series High Performance Solid State Relays DC solid state relay for loads up to 2A @ 60Vdc Product Facts I Standard options: short circuit/overload protection, switch status and trip status. I Optically coupled all solid state relay. I TTL & CMOS compatible input. I Low on-resistance power MOSFET output. I Tested per MIL-R-28750 and approved to DSCC drawing 88062 with “Y” level screening. DS11 series SSRs feature state of the art photo-voltaic optical isolation and power MOSFET output chips for ultra-reliable high speed switching of DC loads up to 2 amps, with extremely low on-resistance. Standard options include integral current overload/short circuit protection to provide protection of the relay, load and wiring; and isolated switch status or trip status. The overload feature provides protection if a short or overload develops while the relay is in the on state or if the relay is turned on into a dead short. Switch status, optically isolated from the load, signals the status of the output and provides a logic “0” when the output is off and a logic “1” when the output is on. Trip status, also optically isolated from the load, provides a logic “1” if the output trips off and a logic “0” when the output is in a normal condition, on or off, and is available only in conjunction with short circuit protection. CII Part No. DSCC Dwg. No. Relay Version DS11-1Y 88062-008 Basic relay DS11-1000 88062-004 Relay w/ short circuit protection DS11-1001 88062-006 Relay w/ switch status DS11-1002 88062-002 Relay w/ short circuit protection and switch status DS11-1003 N/A Relay w/ short circuit protection and trip status

2 Terminal Input Configuration

Direct Drive (Status Optional) TTL Drive

3 Terminal Input Configuration

With Output Status Without Output Status Status Output +V Load Supply Load V Status V CC INPUT OUTPUT 1 3 6 81214 +V Supply Load V CC INPUT OUTPUT TTL 1 3 6 81214 Status Output +V Load Supply Load V Status V CC INPUT OUTPUT 1 3 6 81214 TTL or CMOS +V Supply Load V CC INPUT OUTPUT TTL or CMOS 1 3 6 81214

DS11 Series High Performance Solid State Relays DC solid state relay for loads up to 2A @ 60Vdc (Continued) Electrical Specifications (-55°C to +105°C unless otherwise specified) Input (2 terminal configuration) Input supply voltage range (Vcc) 3.8 - 32 Vdc (Notes 1 & 2, Figures 1 & 2) Input current (max.) @ 5Vdc 15mAdc (Notes 1 & 2, Figures 1 & 2) Must turn-on voltage 3.8Vdc Must turn-off voltage 1.5Vdc Reverse voltage protection -32Vdc Input (3 terminal configuration) Control voltage range 0 - 18 Vd Control current (max.) 250µAdc @ 5V, 1mA @ 18V Input supply voltage range (Vcc) 3.8 - 32 Vdc (Notes 1 & 2, Figures 1 & 2) Input current (max.) @ 5Vdc 15mADC (Notes 1 & 2, Figures 1 & 2) Must turn-on voltage 0.3Vdc Must turn-off voltage 3.2Vdc I/O Dielectric strength (min.) 1,000V rms Insulation resistance (min.) @ 500Vdc 10 9 ohms Capacitance (max.) 10pF Output Continuous load current (max.) @ 25°C 2.1Adc (Figure 7) Continuous load voltage (max.) 60Vdc Transient blocking voltage (max.) 80Vdc (Note 5) On resistance (max.) @ Tj = 25°C, I L = 100mA 0.15 ohm (Note 6, Figure 6) Output voltage drop (max.) 0.5Vdc Leakage current (max.) @ V = 60Vdc 100µAdc Leakage current (max.) @ V = 60Vdc, with switch status 2mAdc Turn-on time (max.) 3 ms (Figure 3) Turn-off time (max.) 1 ms (Figure 3) dv/dt (min.) 100V / µs Electrical system spike 600Vdc (Note 5) Output chip junction temperature (max.) 125°C Thermal resistance (max.), junction to ambient 90°C/W Thermal resistance (max.), junction to case 25°C/W Status Status supply voltage range 1 - 18Vdc Status current (max.) @ Vstatus ≤ 0.4Vdc 600µADC (Figure 5, Note 8) Status leakage current (max.) @ 16Vdc 10µAdc Status turn-on time (max.) 3.5 ms (Figure 4) Status turn-off time (max.) 8 ms (Figure 4) Short Circuit Protection Current surge without tripping (max.), 100ms pulse 4.25Adc Overload trip current (max.), 0.5 ms pulse, V = 60Vdc 10Adc Trip time (typical), turning on into short 400µs Trip time (typical), shorting while relay is on 280µs Environmental Characteristics Ambient Temperature Range: Operating: -55°C to +105°C. Storage: -55°C to +105°C. Vibration Resistance: 100 G’s, 10-3,000 Hz. Shock Resistance: 50 G’s, 11 ms pulse. Constant Acceleration Resistance (Y1 axis): 5,000 G’s. Catalog DS11-TBD Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 1-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Mechanical Characteristics Weight (approx.): .176 oz. (5 grams) Materials: Header: Kovar Cover: Nickel Pins: Kovar, gold plated