DS08 LUMILEDS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Features
High Luminance Low Power Consumption Low Thermal Resistance Low Profile Solderless Mounting Technique Formable Substrate Meets SAE/ECE/JIS Automotive Color Requirements Packaged in tubes for use with automatic assembly equipment Lead-Free RoHS Compliant Dual-Mode (Stop/Tail) Option Typical
Applications
Automotive Lighting - Rear Combination Lamps - Front Turn Signal Lamps - High Mount Stop Lamps - Indirect Lighting Solid State Lighting and Signaling HPWS-TH00 HPWS-FH00 HPWS-TH77 HPWS-FH77 HPWS-TL00 HPWS-FL00
SnapLED 150 Technical Datasheet DS08 (01/07) Copyright 2007 Philips Lumileds Lighting Company.2 Selection Guide Table 1 Total Total Viewing Angle Flux ΦΦVV ((llmm)) Included Angle 22θθ11//22 @ 150 mA[1] θθ00..90V (Degrees) [2] (Degrees) Part Number Drive Current LED Color Typ. Typ. Typ. HPWS-TH00 Single Mode TS AlInGaP Red-Orange 11.0 120 85 HPWS-FH00 Single Mode 70 30 HPWS-TH77 Dual Mode 120 85 HPWS-FH77 Dual Mode 70 30 HPWS-TL00 Single Mode TS AlInGaP Amber 5.5 120 85 HPWS-FL00 Single Mode 70 30 Notes for Table 1: 1.Φv is the total luminous flux output as measured with an integrating sphere after the device has stabilized. (R θJ-A = 100°C/W, TA = 25ºC, Tj ~ 60°C.) 2.θ0.90 V is the included angle at which 90% of the total luminous flux is captured. See Figure 5. Outline Drawings Notes: 1.Dimensions are in millimeters (inches). 2.Dimensions without tolerances are nominal. 3.Cathode lead is indicated with a "C" and anode lead is indicated with an "A." 4.Clinch joint locations shown in dashed lines on top view of part (11.50 mm spacing).
SnapLED 150 Technical Datasheet DS08 (01/07) Copyright 2007 Philips Lumileds Lighting Company.3 Absolute Maximum Ratings at TA = 25°C Table 2 PPaarraammeetteerr RRaattiinngg UUnniittss DC Forward Current [1,2] 150 mA Pulsed Forward Current [3] 200 mA Minimum DC Forward Current [1] 5m A Power Dissipation 473 mW Reverse Voltage (IR = 100 μA) 10 V Operating Temperature Range -40 to +100 °C Storage Temperature Range -55 to +110 °C High Temperature Chamber 125 (2 hrs.) °C LED Junction Temperature (Tj) 125 °C Notes for Table 2: 1. Operation at drive currents below 20 mA is recommended only with dual-mode specified LEDs. 2. Derate linearly as shown in Figure 3a. 3. Derate linearly as shown in Figure 3b. Optical Characteristics at TA = 25°C IF = 150 mA, RθθJ-A = 100°C/W Table 3 RRaattiioo ooff TToottaall TToottaall LLuummiinnoouuss CCoolloorr,, TToottaall SSttaabbiilliizzeedd IInnssttaannttaanneeoouuss IInntteennssiittyy ttoo DDoommiinnaanntt IInncclluuddeedd PPeeaakk VViieewwiinngg FFlluuxx FFlluuxx TToottaall FFlluuxx WWaavveelleennggtthh AAnnggllee θθ00..9900 VV WWaavveelleennggtthh AAnnggllee 22θθ11//22 DDeevviiccee ΦΦvv ((llmm)) [1] ΦΦvv ((llmm)) [2] IIvv((ccdd))//ΦΦvv((llmm)) λλdd ((nnmm)) [3] ((DDeeggrreeeess)) [4] λλppeeaakk ((nnmm))[3] ((DDeeggrreeeess)) HPWS-THXX 11.0 12.4 0.6 620 120 632 85 HPWS-FHXX 2.0 70 30 HPWS-TL00 5.5 7.2 0.6 594 120 597 85 HPWS-FL00 2.0 70 30 Notes for Table 3: 1.Total Stabilized Flux Φv is the total luminous flux output as measured with an integrating sphere after the device has stabilized to Tj ~ 60°C. 2.Total Instantaneous Flux Φv is the total luminous flux output as measured with an integrating sphere at 20ms duration. 3. The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device at Tj ~ 60 °C. 4. θ0.90 V is the included angle at which 90% of the total luminous flux is captured. See Figure 5.
SnapLED 150 Technical Datasheet DS08 (01/07) Copyright 2007 Philips Lumileds Lighting Company.6 SnapLED 150 Product Binning This section provides bin selection assistance for SnapLED 150 LEDs. Additional category and label details for SnapLED product can be found in AB20-7. Product availability varies by color and other factors, and not all bin-selection combinations are available. Contact your Philips Lumileds representative for further assistance. LLuummiinnoouuss FFlluuxx BBiinnss HHiigghh DDrriivvee CCuurrrreenntt LLooww DDrriivvee CCuurrrreenntt [[11]] ((115500mmAA)) ((1100mmAA)) PPaarrtt BBiinn MMiinniimmuumm MMaaxxiimmuumm MMiinniimmuumm MMaaxxiimmuumm NNuummbbeerr CCooddee LLuummiinnoouuss FFlluuxx [[22]] ((llmm)) LLuummiinnoouuss FFlluuxx [[22]] ((llmm)) LLuummiinnoouuss FFlluuxx ((llmm)) LLuummiinnoouuss FFlluuxx ((llmm)) F 3.00 4.20 N/A N/A G 3.50 4.80 N/A N/A H 4.00 6.10 N/A N/A J 5.00 7.30 N/A N/A L 6.00 9.70 N/A N/A L 6.00 9.70 N/A N/A M 8.00 12.00 N/A N/A N 10.00 16.00 N/A N/A P 13.00 21.00 N/A N/A U 7.20 11.40 0.50 0.97 V 9.40 14.10 0.63 1.19 W 11.50 16.70 0.79 1.43 Note: 1. Dual-Mode Drive Current option applies to HPWS-xH77 product only. 2.Total Luminous Flux at 150mA as measured with an integrating sphere after the device has stabilized. T j ~ 60°C DDoommiinnaanntt WWaavveelleennggtthh BBiinnss,, RReedd--OOrraannggee MMiinniimmuumm DDoommiinnaanntt MMaaxxiimmuumm DDoommiinnaanntt BBiinn CCooddee WWaavveelleennggtthh ((nnmm)) WWaavveelleennggtthh ((nnmm)) 1 611 617 2 615 621 3 619 629 DDoommiinnaanntt WWaavveelleennggtthh BBiinnss,, AAmmbbeerr MMiinniimmuumm DDoommiinnaanntt MMaaxxiimmuumm DDoommiinnaanntt BBiinn CCooddee WWaavveelleennggtthh ((nnmm)) WWaavveelleennggtthh ((nnmm)) 1 587 591 2 589 594 9 592 595 3 592 597 HPWS-FL00 HWPS-TL00 HPWS-FH00 HWPS-TH00 HPWS-FH77 HWPS-TH77
SnapLED 150 Technical Datasheet DS08 (11/07) Copyright 2007 Philips Lumileds Lighting Company.7 FFoorrwwaarrdd VVoollttaaggee BBiinnss,, HHiigghh CCuurrrreenntt ((115500 mmAA)) MMiinniimmuumm MMaaxxiimmuumm BBiinn CCooddee VVoollttaaggee VVoollttaaggee 1 2.19 2.43 2 2.31 2.55 3 2.43 2.67 4 2.55 2.79 5 2.67 2.91 6 2.79 3.03 7 2.91 3.15 FFoorrwwaarrdd VVoollttaaggee BBiinnss,, LLooww CCuurrrreenntt11 ((1100 mmAA)) MMiinniimmuumm MMaaxxiimmuumm BBiinn CCooddee VVoollttaaggee VVoollttaaggee B 1.84 1.94 C 1.90 2.00 D 1.96 2.06 E 2.02 2.12 F 2.08 2.18 G 2.14 2.24 H 2.20 2.30 1. Low Current Vf Binning applies to HPWS-xH77 Dual-Mode product only.
©2007 Philips Lumileds Lighting Company. All rights reserved. Product specifications are subject to change without notice. Luxeon is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. www.luxeon.com www.lumiledsfuture.com For technical assistance or the location of your nearest sales office contact any of the following: North America: 1 888 589 3662 americas@futurelightingsolutions.com Europe: 00 800 443 88 873 europe@futurelightingsolutions.com Asia Pacific: 800 5864 5337 asia@futurelightingsolutions.com Japan: 800 5864 5337 japan@futurelightingsolutions.com Company Information Philips Lumileds is a world-class supplier of Light Emitting Diodes (LEDs) producing billions of LEDs annually. Philips Lumileds is a fully integrated supplier, producing core LED material in all three base colors (Red, Green, Blue) and White. Philips Lumileds has R&D centers in San Jose, California and in The Netherlands and produc- tion capabilities in San Jose and Penang, Malaysia. Founded in 1999, Philips Lumileds is the high-flux LED technology leader and is dedi- cated to bridging the gap between solid-state LED technology and the lighting world. Philips Lumileds technology, LEDs and systems are enabling new applications and markets in the lighting world. Philips Lumileds may make process or materials changes affecting the perform- ance or other characteristics of our products. These products supplied after such changes will continue to meet published specifications, but may not be identical to products supplied as samples or under prior orders. ©2007 Philips Lumileds Lighting Company. All rights reserved. Product specifications are subject to change without notice. Luxeon is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries.