DRV3256-Q1 TI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 18
Technical content
DRV3256-Q1 Integrated 3-Phase 48-V Automotive Gate Driver Unit (GDU) with Advanced Protection and Diagnostics
1 Features
- AEC-Q100 qualified for automotive applications: – Device ambient temperature grade 0: –40°C to +150°C – Device HBM ESD classification level 2 – Device CDM ESD classification level C4B
- Functional Safety-Compliant targeted – Developed for functional safety applications – Documentation to aid ISO 26262 system design will be available upon production release – Systematic capability up to ASIL D targeted
- Three N-Channel half-bridge gate driver – 2-A/2.5-A max peak gate drive current – Power architecture optimized for 48-V
applications
– 12-V/48-V split supply architecture – 95-V transient absolute maximum rating of DC link power supply (DHCP) – 105-V Bootstrap voltage to support 90-V MOSFET operating voltage range – Bootstrap with charge pump for 100% duty cycle
- Integrated 1x (DRV3256A-Q1) or 3x (DRV3256- Q1) current shunt amplifiers
- Integrated configurable Active Short Circuit (ASC) function – Low-side (DRV3256A-Q1) or Low-side and High-side (DRV3256-Q1/DRV3256B-Q1) ASC support – Low-side and High-side ASC support – Device pin control available – Fault handling capability
- Serial peripheral interface (SPI) with CRC
- Supports 3.3-V and 5-V logic inputs
- Advanced protection features – Battery voltage monitors – MOSFET VDS overcurrent monitors – Rshunt overcurrent monitors – MOSFET VGS gate fault monitors – Analog built in self test – Internal regulator and clock monitors – Device thermal warning and shutdown – Fault condition indicator pins
2 Applications
- Automotive 48-V Motor Drive Systems – Belt and integrated starter generators, and Motor generators – Electrical Power Steering – eTurbos and eBoosters – Transmission control and actuation – Oil, transmission, and water pumps – HVAC compressors and fans
3 Description
The DRV3256-Q1 family of devices are highly- integrated three phase gate driver s for 48-V automotive motor drive applications. These devices are specifically designed to support high-power motor drive applications by providing 2-A peak source and 2.5-A peak sink gate drive currents, and 90-V MOSFET transient over voltage support. A highly efficient bootstrap architecture is used to minimize power losses and self-heating of the gate drivers. A charge pump allows for the gate drivers to support 100% PWM duty cycle control. A wide range of diagnostics, monitoring, and protection features supports a robust motor drive system design. A highly configurable Active Short Circuit (ASC) function which enables selected external MOSFETs is integrated to achieve the fast response to system faults and to eliminate the needs of external components. Three or single low-side current shunt amplifiers are optionally provided to support resistor based low-side current sensing.
Package Information
PART NUMBER(1) PACKAGE BODY SIZE (NOM) DRV3256-Q1(2) HTQFP (64) 10.00 mm × 10.00 mm (1) See the orderable addendum at the end of the data sheet. (2) For all available device variants, see the device comparison table. DRV3256-Q1 Three-Phase Gate Driver Controller nSLEEP DRVOFF SPI PWM nFAULT Protection 2A/2.5A N-Channel MOSFETs Gate Drive M nASCIN Current Sense 3 or 1 or 0 x Shunt Amp Current/Phase 48 V ( 20 to 90 V)12 V HS/LS or LS ASC Simplified Schematic DRV3256-Q1 SNVSC76C – JUNE 2022 – REVISED DECEMBER 2022 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA.
6 Mechanical, Packaging, and Orderable Information....4
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Revision B (August 2022) to Revision C (December 2022) Page
- Added DRV3256P-Q1 device variant in the Device Comparison Table and packaging information tables....0 Changes from Revision A (July 2022) to Revision B (August 2022) Page Changes from Revision * (June 2022) to Revision A (July 2022) Page DRV3256-Q1 SNVSC76C – JUNE 2022 – REVISED DECEMBER 2022 www.ti.com
2 Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated
Product Folder Links: DRV3256-Q1
PART NUMBER DEVICE VARIANT MAX GATE DRIVE CURRENT SHUNT AMPLIFIERS Active Short Circuit (HS = High-Side, LS = Low- Side) DRV3256-Q1 DRV3256A-Q1 2 A or 2.5 A 1 LS only DRV3256B-Q1 2 A or 2.5 A 0 HS and LS DRV3256-Q1 2 A or 2.5 A 3 HS and LS DRV3256P-Q1(1) 2 A or 2.5 A 3 HS and LS (1) DRV3256P-Q1 supports Watchdog Timer function, VGLPU_CTRL, PVDD_UV2_LVL2, SD_MODE_SEL register bits in addition to the features of the device variant DRV3256-Q1. www.ti.com DRV3256-Q1 SNVSC76C – JUNE 2022 – REVISED DECEMBER 2022 Copyright © 2022 Texas Instruments Incorporated Submit Document Feedback 3 Product Folder Links: DRV3256-Q1
5 Device and Documentation Support
5.1 Device Support
5.1.1 Device Nomenclature
Device Nomenclature shows a legend for reading the complete orderable device name for the DRV3256-Q1 device
5.2 Documentation Support
For related documentation see the following:
- Texas Instruments, How to Build a Small, Functionally Safe 48-V, 30-kW MHEV Motor-Drive System White paper
- Texas Instruments, How to optimize a motor-driver design for 48-V starter generators Technical article
- Texas Instruments, System Design Considerations for High-Power Motor Driver Applications Application note
- Texas Instruments, Driving parallel MOSFETs using the DRV3255-Q1 Application brief
- Texas Instruments, A basic brushless gate driver design – part 3: integrated vs. discrete half bridges Technical article
- Texas Instruments,PowerPAD™ Thermally Enhanced Package application report
- Texas Instruments,PowerPAD™ Made Easy application report
- Texas Instruments,Sensored 3-Phase BLDC Motor Control Using MSP430 application report
5.2.1 Receiving Notification of Documentation Updates
To receive notification of documentation updates, navigate to the device product folder on ti.com. Click on Subscribe to updates to register and receive a weekly digest of any product information that has changed. For change details, review the revision history included in any revised document.
5.3 Support Resources
TI E2E™ support forums are an engineer's go-to source for fast, verified answers and design help — straight from the experts. Search existing answers or ask your own question to get the quick design help you need. Linked content is provided "AS IS" by the respective contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of Use.
5.4 Trademarks
TI E2E™ is a trademark of Texas Instruments. All trademarks are the property of their respective owners.
5.5 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
5.6 Glossary
TI Glossary This glossary lists and explains terms, acronyms, and definitions.
6 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of this document. For browser-based versions of this data sheet, refer to the left-hand navigation. DRV3256-Q1 SNVSC76C – JUNE 2022 – REVISED DECEMBER 2022 www.ti.com
4 Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated
Product Folder Links: DRV3256-Q1
6.1 Package Option Addendum
Device Status Package Type Package Drawing Pins Package Qty Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking DRV3256AEPA PRQ1 ACTIVE HTQFP PAP 64 1000 RoHS & Green NIPDAU Level-3-260C-1 68 HR -40 to 150 DRV3256A DRV3256EPAP RQ1 ACTIVE HTQFP PAP 64 1000 RoHS & Green NIPDAU Level-3-260C-1 68 HR -40 to 150 DRV3256 DRV3256BEPA PRQ1 ACTIVE HTQFP PAP 64 1000 RoHS & Green NIPDAU Level-3-260C-1 68 HR -40 to 150 DRV3256B DRV3256PEPA PRQ1 ACTIVE HTQFP PAP 64 1000 RoHS & Green NIPDAU Level-3-260C-1 68 HR -40 to 150 DRV3256P Important Information and Disclaimer: The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. www.ti.com DRV3256-Q1 SNVSC76C – JUNE 2022 – REVISED DECEMBER 2022 Copyright © 2022 Texas Instruments Incorporated Submit Document Feedback 5 Product Folder Links: DRV3256-Q1
6.2 Tape and Reel Information
Reel Width (W1) REEL DIMENSIONS W Dimension designed to accommodate the component length Dimension designed to accommodate the component thickness Overall width of the carrier tape Pitch between successive cavity centers Dimension designed to accommodate the component width TAPE DIMENSIONS B0 W A0Cavity QUADRANT ASSIGNMENTS FOR PIN 1 ORIENTATION IN TAPE Pocket Quadrants Sprocket Holes Q1 Q1Q2 Q2 Q3 Q3Q4 Q4 Reel Diameter User Direction of Feed Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) (mm) (mm) (mm) (mm) W (mm) Pin1 Quadrant DRV3256-Q1 SNVSC76C – JUNE 2022 – REVISED DECEMBER 2022 www.ti.com
6 Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated
Product Folder Links: DRV3256-Q1
TAPE AND REEL BOX DIMENSIONS Width (mm) W L H Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) DRV3256AEPAPRQ1 HTQFP PAP 64 1000 10.0 10.0 1.0 DRV3256EPAPRQ1 HTQFP PAP 64 1000 10.0 10.0 1.0 DRV3256BEPAPRQ1 HTQFP PAP 64 1000 10.0 10.0 1.0 DRV3256PEPAPRQ1 HTQFP PAP 64 1000 10.0 10.0 1.0 www.ti.com DRV3256-Q1 SNVSC76C – JUNE 2022 – REVISED DECEMBER 2022 Copyright © 2022 Texas Instruments Incorporated Submit Document Feedback 7 Product Folder Links: DRV3256-Q1
NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. Body length does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed 0.15 per side. 4. Body width does not include interlead flash. Interlead flash shall not exceed 0.50 per side. 5. Strap features may not be present. 6. The package thermal pad must be soldered to the printed circuit board for thermal and mechanical performance. PowerPAD is a trademark of Texas Instruments PACKAGE OUTLINE 4225982/B 07/2021 www.ti.com HTQFP - 1.2 mm max height PLASTIC QUAD FLATPACK PAP0064N A 0.08 C B10.2 9.8 10.2 9.8 12.2 11.8 PIN 1 ID 4X 7.5 60X 0.564X 0.27 0.17
0.08 C A B
C 0.09- 0.20 TYP SEE DETAIL A 1.2 17 32 4964 (1) 0.15 0.05 0.25 GAGE PLANE 0° MIN 0°- 7° 0.75 0.45 5.30 4.06 (0.11) TYP NOTE 5 EXPOSED THERMAL PAD (0.11) TYP NOTE 5 DRV3256-Q1 SNVSC76C – JUNE 2022 – REVISED DECEMBER 2022 www.ti.com
8 Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated
Product Folder Links: DRV3256-Q1
NOTES: (continued) 7. Publication IPC-7351 may have alternate designs. 8. Solder mask tolerances between and around signal pads can vary based on board fabrication site. 9. This package is designed to be soldered to a thermal pad on the board. Refer to technical brief, PowerPAD Thermally Enhanced EXAMPLE BOARD LAYOUT 4225982/B 07/2021 www.ti.com HTQFP - 1.2 mm max heightPAP0064N PLASTIC QUAD FLATPACK SYMM SYMM LAND PATTERN EXAMPLE SCALE: 8X (11.4) NON SOLDER MASK DEFINED
0.05 MAX
( 8) NOTE 9 ( 5.3) SOLDER MASK OPENING 64X (1.5) 64X (0.3) 60X (0.5) (0.65) TYP (1.3) TYP (0.65) TYP (1.3) TYP (11.4) SEE DETAIL METAL COVERED BY SOLDER MASK SOLDER MASK DEFINED PAD (Ø 0.2) TYP VIA 17 32 4964 www.ti.com DRV3256-Q1 SNVSC76C – JUNE 2022 – REVISED DECEMBER 2022 Copyright © 2022 Texas Instruments Incorporated Submit Document Feedback 9 Product Folder Links: DRV3256-Q1
NOTES: (continued) 9. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 10. Board assembly site may have different recommendations for stencil design. EXAMPLE STENCIL DESIGN 4225982/B 07/2021 www.ti.com HTQFP - 1.2 mm max heightPAP0064N PLASTIC QUAD FLATPACK SOLDER PASTE EXAMPLE EXPOSED PAD 100% PRINTED COVERAGE BY AREA SCALE: 8X SYMM SYMM (11.4) ( 5.3) BASED ON
0.1 THICK STENCIL
64X (1.5) 64X (0.3) 60X (0.5) (11.4) METAL COVERED BY SOLDER MASK 4964 SEE TABLE FOR DIFFERENT OPENINGS FOR OTHER STENCIL THICKNESSES 0.178 3.75 X 3.75 0.152 4.06 X 4.06 0.127 4.44 X 4.44 0.1 5.3X5.3 (SHOWN) STENCIL THICKNESS SOLDER STENCIL OPENING DRV3256-Q1 SNVSC76C – JUNE 2022 – REVISED DECEMBER 2022 www.ti.com
10 Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated
Product Folder Links: DRV3256-Q1
www.ti.com 23-May-2025 PACKAGING INFORMATION Orderable part number Status (1) Material type (2) Package | Pins Package qty | Carrier RoHS (3) Lead finish/ Ball material (4) MSL rating/ Peak reflow (5) Op temp (°C) Part marking (6) DRV3256AEPAPRQ1 Active Production HTQFP (PAP) | 64 1000 | LARGE T&R Yes NIPDAU Level-3-260C-168 HR -40 to 150 DRV3256A DRV3256AEPAPRQ1.A Active Production HTQFP (PAP) | 64 1000 | LARGE T&R Yes NIPDAU Level-3-260C-168 HR -40 to 150 DRV3256A DRV3256BEPAPRQ1 Active Production HTQFP (PAP) | 64 1000 | LARGE T&R Yes NIPDAU Level-3-260C-168 HR -40 to 150 DRV3256B DRV3256BEPAPRQ1.A Active Production HTQFP (PAP) | 64 1000 | LARGE T&R Yes NIPDAU Level-3-260C-168 HR -40 to 150 DRV3256B DRV3256EPAPRQ1 Active Production HTQFP (PAP) | 64 1000 | LARGE T&R Yes NIPDAU Level-3-260C-168 HR -40 to 150 DRV3256 DRV3256EPAPRQ1.A Active Production HTQFP (PAP) | 64 1000 | LARGE T&R Yes NIPDAU Level-3-260C-168 HR -40 to 150 DRV3256 DRV3256PEPAPRQ1 Active Production HTQFP (PAP) | 64 1000 | LARGE T&R Yes NIPDAU Level-3-260C-168 HR -40 to 150 DRV3256P DRV3256PEPAPRQ1.A Active Production HTQFP (PAP) | 64 1000 | LARGE T&R Yes NIPDAU Level-3-260C-168 HR -40 to 150 DRV3256P (1) Status: For more details on status, see our product life cycle. (2) Material type: When designated, preproduction parts are prototypes/experimental devices, and are not yet approved or released for full production. Testing and final process, including without limitation quality assurance, reliability performance testing, and/or process qualification, may not yet be complete, and this item is subject to further changes or possible discontinuation. If available for ordering, purchases will be subject to an additional waiver at checkout, and are intended for early internal evaluation purposes only. These items are sold without warranties of any kind. (3) RoHS values: Yes, No, RoHS Exempt. See the TI RoHS Statement for additional information and value definition. (4) Lead finish/Ball material: Parts may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two lines if the finish value exceeds the maximum column width. (5) MSL rating/Peak reflow: The moisture sensitivity level ratings and peak solder (reflow) temperatures. In the event that a part has multiple moisture sensitivity ratings, only the lowest level per JEDEC standards is shown. Refer to the shipping label for the actual reflow temperature that will be used to mount the part to the printed circuit board. (6) Part marking: There may be an additional marking, which relates to the logo, the lot trace code information, or the environmental category of the part. Addendum-Page 1
www.ti.com 23-May-2025 Multiple part markings will be inside parentheses. Only one part marking contained in parentheses and separated by a "~" will appear on a part. If a line is indented then it is a continuation of the previous line and the two combined represent the entire part marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2
PACKAGE MATERIALS INFORMATION www.ti.com 16-Nov-2023 TAPE AND REEL INFORMATION Reel Width (W1) REEL DIMENSIONS A0B0K0WDimension designed to accommodate the component lengthDimension designed to accommodate the component thicknessOverall width of the carrier tapePitch between successive cavity centersDimension designed to accommodate the component width TAPE DIMENSIONSK0 P1B0WA0Cavity QUADRANT ASSIGNMENTS FOR PIN 1 ORIENTATION IN TAPE Pocket QuadrantsSprocket HolesQ1Q1Q2Q2Q3Q3Q4Q4User Direction of Feed P1ReelDiameter *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) (mm) (mm) (mm) (mm) W (mm) Pin1 Quadrant Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION www.ti.com 16-Nov-2023 TAPE AND REEL BOX DIMENSIONS Width (mm) W LH *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) DRV3256AEPAPRQ1 HTQFP PAP 64 1000 367.0 367.0 55.0 DRV3256BEPAPRQ1 HTQFP PAP 64 1000 367.0 367.0 55.0 DRV3256EPAPRQ1 HTQFP PAP 64 1000 367.0 367.0 55.0 DRV3256PEPAPRQ1 HTQFP PAP 64 1000 367.0 367.0 55.0 Pack Materials-Page 2
NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. Body length does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed 0.15 per side. 4. Body width does not include interlead flash. Interlead flash shall not exceed 0.50 per side. 5. Strap features may not be present. 6. The package thermal pad must be soldered to the printed circuit board for thermal and mechanical performance. PowerPAD is a trademark of Texas Instruments PACKAGE OUTLINE 4225982/B 07/2021 www.ti.com HTQFP - 1.2 mm max height PLASTIC QUAD FLATPACK PAP0064N A 0.08 C B10.2 9.8 10.2 9.8 12.2 11.8 PIN 1 ID 4X 7.5 60X 0.564X 0.27 0.17 C 0.09- 0.20 TYP SEE DETAIL A 1.2 17 32 4964 (1) 0.15 0.05 0.25 GAGE PLANE 0° MIN 0°- 7° 0.75 0.45 5.30 4.06 (0.11) TYP NOTE 5 EXPOSED THERMAL PAD (0.11) TYP NOTE 5
NOTES: (continued) 7. Publication IPC-7351 may have alternate designs. 8. Solder mask tolerances between and around signal pads can vary based on board fabrication site. 9. This package is designed to be soldered to a thermal pad on the board. Refer to technical brief, PowerPAD Thermally Enhanced EXAMPLE BOARD LAYOUT 4225982/B 07/2021 www.ti.com HTQFP - 1.2 mm max heightPAP0064N PLASTIC QUAD FLATPACK SYMM SYMM LAND PATTERN EXAMPLE SCALE: 8X (11.4) NON SOLDER MASK DEFINED ( 8) NOTE 9 ( 5.3) SOLDER MASK OPENING 64X (1.5) 64X (0.3) 60X (0.5) (0.65) TYP (1.3) TYP (0.65) TYP (1.3) TYP (11.4) SEE DETAIL METAL COVERED BY SOLDER MASK SOLDER MASK DEFINED PAD (Ø 0.2) TYP VIA 17 32 4964
NOTES: (continued) 9. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 10. Board assembly site may have different recommendations for stencil design. EXAMPLE STENCIL DESIGN 4225982/B 07/2021 www.ti.com HTQFP - 1.2 mm max heightPAP0064N PLASTIC QUAD FLATPACK SOLDER PASTE EXAMPLE EXPOSED PAD 100% PRINTED COVERAGE BY AREA SCALE: 8X SYMM SYMM (11.4) ( 5.3) BASED ON 64X (1.5) 64X (0.3) 60X (0.5) (11.4) METAL COVERED BY SOLDER MASK 4964 SEE TABLE FOR DIFFERENT OPENINGS FOR OTHER STENCIL THICKNESSES 0.178 3.75 X 3.75 0.152 4.06 X 4.06 0.127 4.44 X 4.44 0.1 5.3X5.3 (SHOWN) STENCIL THICKNESS SOLDER STENCIL OPENING
IMPORTANT NOTICE AND DISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATA SHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, regulatory or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2025, Texas Instruments Incorporated