DRSA1300W0R1JC

DRSA600W250RJG TOKEN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Choose Token’s Power DRS adjustable resistor for applications requiring settings at different resistance values. These wirewound resistors are equipped with an adjustable lug, making them ideal for adjusting circuits, obtaining unique resistance values and setting equipment to meet various line voltages. DRS resistors feature a hollow core to permit secure fastening with thru bolts with washers or spring-type clips. They also offer the durability of lead free vitreous enamel, or silicone coating and all-welded construction. The Power Adjustable DRS Resistor is RoHS compliant and lead free. For non-standard technical requirements and custom special applications, please contact us. To Calculate Max. Amperes :

• V oltage = (Watts x Ohms) 1/2 Power Rating :
• Adjustability is 10% to 90% of full resistance value.
• Wattage is proportional to this adjusted resistance value.
• Example: If the lug is set at half resistance, the wattage is reduced by approximately one-half.
• Setting the lug at an intermediate point reduces the wattage rating by approximately the same proportion.
• Based on 25°C free air rating. The stated wattage rating applies only when the entire resistance is in the circuit. Features :
• Adjustable lug supplied.
• High wattage applications.
• Flame resistant and rugged lead coating.
• Resistance Tolerance: J(±5%), K(±10%).
• Terminals suitable for soldering or bolt connection. Options :
• Special temperature coefficients, tolerances
• Adjustable, fixed, or tapped styles are available.
• Non-inductive Ayrton Perry windings can be specified.
• Special terminals available for non-standard applications.
• Single and double quick connect terminals can be specified.
• Standard lug terminals available with or without terminal hardware. DRS Power Adjustable Resistors Adjustable Resistor for Applications Requiring Settings at Different Resistance Values Power Round-Wire Adjustable Resistors TOKEN

(DRS-A) 20W ~ 1300W Dimensions Power Adjustable Resistor (DRS-A) N - No mount Dimensions M K I O F J N L D C B HG E A Power Adjustable Resistor (DRS-A) Z - Vertical mount Dimensions Power Adjustable Resistor (DRS-A) G - Horizontal mount Dimensions Wattage Rating Dimensions (mm) Max. Resistance Value(Ω) A B C D E F G H I J K L M N O 20W 60 17 8 22 5 78 2 12 4 90 36 1.0 - 6 16 1~1KΩ 30W 80 17 8 22 5 100 2 12 4 112 36 1.0 - 6 16 1~1.5KΩ 40W 110 17 8 22 5 128 2 12 4 140 36 1.0 - 6 16 1~2KΩ 50W 110 25 16 30 8 150 5 18 6 166 58 1.2 6 - 27 0.1~5KΩ 60W 90 28 18 32 8 130 5 19 6 146 60 1.2 6 - 27 0.1~6KΩ 80W 110 28 18 32 8 150 5 19 6 166 60 1.2 6 - 27 0.1~8KΩ 100W 140 28 18 32 8 180 5 19 6 196 60 1.2 6 - 27 0.1~10KΩ 120W 160 28 18 32 8 200 5 19 6 216 60 1.2 6 - 27 0.1~12KΩ 150W 195 28 18 32 8 235 5 19 6 251 60 1.2 6 - 27 0.3~15KΩ 160W 185 35 24 36 10 225 5 19 8 245 76 1.6 6 - 34 0.3~16KΩ 200W 210 35 24 36 10 250 5 19 8 274 76 1.6 6 - 34 0.3~20KΩ 250W 210 40 25 38 12 250 5 20 8 274 78 1.6 6 - 34 0.5~25KΩ 300W 260 40 25 38 12 300 5 20 8 320 78 1.6 6 - 34 0.5~30KΩ 400W 330 40 25 38 12 370 5 20 8 395 78 1.6 6 - 34 0.5~40KΩ 500W 330 50 35 50 12 380 6 25 9 400 100 1.6 8 - 40 0.5~50KΩ 600W 400 50 35 50 12 450 6 25 9 470 100 1.6 8 - 40 0.8~60KΩ 700W 460 50 35 50 12 510 6 25 9 530 100 1.6 8 - 40 0.8~70KΩ 800W 460 60 40 55 15 515 6 30 10 535 110 1.6 10 - 50 0.8~80KΩ 1000W 540 60 40 55 15 595 6 30 10 615 110 1.6 10 - 50 1~100KΩ 1300W 650 65 42 62 15 702 6 30 10 722 115 1.6 10 - 50 1~130KΩ Version 2010 DRS Power Adjustable ResistorsTOKEN

(DRS-B) 15W ~ 20000W Dimensions H q Q M R d N Wattage Rating Dimensions (mm) Resistance Range R L1 L2 L3 H N d M q Q 15W 15 45 65 85 40 6 3.5 3.5 4.5 15 1~1KΩ 20W 15 50 70 90 40 6 3.5 3.5 4.5 15 1~1KΩ 25W 20 50 80 100 50 6 3.5 5 5 20 2~1KΩ 30W 20 70 100 120 50 6 3.5 5 5 20 2~1KΩ 40W 20 87 115 137 50 6 3.5 5 5 20 2~1KΩ 50W 28 90 115 143 68 9 4.5 5.5 6 27 5~1KΩ 80W 28 90 115 143 68 9 4.5 5.5 6 27 5~2KΩ 100W 28 170 195 223 68 9 4.5 5.5 6 27 10~3KΩ 150W 28 215 240 268 68 9 4.5 5.5 6 27 10~3KΩ 200W 28 267 292 320 68 9 4.5 5.5 6 27 10~5KΩ 250W 28 267 292 320 68 9 4.5 5.5 6 27 10~5KΩ 300W 40 267 300 343 90 10 4.5 6 6 39 20~5KΩ 400W 40 330 365 406 90 10 4.5 6 6 39 20~5KΩ 500W 50 330 365 415 98 10 6 8.5 8 49 20~5KΩ 600W 50 330 365 415 98 10 6 8.5 8 49 20~5KΩ 700W 50 400 435 485 95 10 6 8.5 8 49 20~5KΩ 800W 70 300 320 362 138 15 8 - 8 69 40~500Ω 1000W 70 300 320 362 138 15 8 - 8 69 40~500Ω 1500W 70 415 435 477 138 15 8 - 8 69 40~500Ω 2000W 70 510 530 572 138 15 8 - 8 69 40~500Ω 2500W 70 600 620 662 138 15 8 - 8 69 40~500Ω 3000W 70 600 620 662 138 15 8 - 8 69 40~500Ω 4000W 100 430 450 521 185 15 8 - 8 99 40~500Ω 5000W 100 500 620 691 185 15 8 - 8 99 40~500Ω 6000W 100 600 720 791 185 15 8 - 8 99 40~500Ω 10000W 150 600 625 720 350 30 8 - 10 150 40~500Ω 12000W 150 660 685 780 350 30 8 - 10 150 40~500Ω 15000W 150 660 685 780 350 30 8 - 10 150 40~500Ω 20000W 150 1000 1030 1120 350 30 8 - 10 150 40~500Ω Adjustable Power Resistor (DRS-B) N - No mount Dimensions Adjustable Power Resistor (DRS-B) Z - Vertical mount Dimensions Adjustable Power Resistor (DRS-B) G - Horizontal mount Dimensions Version 2010 DRS Power Adjustable ResistorsTOKEN

Test Item Test Methods Characterstics Resistance tolerance JIS-C-5202 5-1 Resistance Nominal Tolerance Temperature coefficient JIS-C-5202 5-2 ±200PPM/°C MAX Load rating JIS-C-5202 5-4 ΔR/R≤±(0.5%+0.1Ω) Surface temperature up 350°C MAX Short-term overload JIS-C-5202 5-5 1000% rated wattage 5 seconds Free of appearance or structural irregularity ΔR/R≤ ±(2%+0.1Ω) Insulation resistance JIS-C-5202 5-6 500VDC 100MΩ min Dielectric withstanding voltage JIS-C-5202 5-7 1000VDC 1 minute Between terminal and anchor stand Free of appearance or structural irregularity Terminal strength JIS-C-5202 6-1 8kg 30 seconds Free of appearance or structural irregularity Vibration JIS-C-5202 6-3 1.5m/m 10 ~ 50 ~ 10 Hz/min X-Y-Z 2 hours each Free of appearance or structural irregularity Surface coating crack ΔR/R≤ ±(1%+0.05Ω) Thermal shock JIS-C-5202 7-3 Room temp 30 minutes ON-55°C 15 minutes OFF Free of structural irregularity ΔR/R≤ ±(2%+0.1Ω) Humidity JIS-C-5202 7-5 40°C 90%RH 240 hours Free of appearance or structural irregularity Surface coating crack ΔR/R≤ ±(3%+0.1Ω) Load life JIS-C-5202 7-10 90 minutes ON - 30 minutes OFF 500 hours Free of appearance or structural irregularity Surface coating crack ΔR/R≤ ±(1%+0.05Ω) Flame retardation JIS-C-5202 7-13-3-2 100% - 600% rated wattage load US UL-94 flame retardation test V-0 grade noncombustible REMARKS: 1. Resistance and resistance tolerance were tested in-house with micro resistance meter. 2. Coating refers to UL-certified data provided by supplier. Determination of End Resistance Value of FVR, DQS, DSRA, DSRB, BSR, BSQ:

• Resistance Range means you can choose one maximum resistance value (End resistance value) at one of FVR, DQS, DSRA, DSRB, BSR, BSQ VR (Variable Resistor) type.
• After End Resistance Value confirmed, the minimum resistance (start resistance value) will be determined by depending on resistance of wire and wirewound type. Power Rating of Variable Resistor: The part Nunber formation of FVR, DQS, DSRA, DSRB, BSR, BSQ: Product type Rated Wattage Resistance Value (Ω) Resistance Tolerance- - - Version 2010 DRS Power Adjustable ResistorsTOKEN

  DRSA 600W  Part Number: DRSA DRSB 250R   J  Rated Power (W): 20W~1300W 15W~20000W  Resistance Value (Ω):  Resistance Tolerance (%) Code Resistance Tolerance J ±5% K ±10% G Code Resistance Value 0R1 0.1Ω 1R 1Ω 10R 10Ω 100R 100Ω 1K 1KΩ 10K 10KΩ 100K 100KΩ  Assembly Method Code Assembly Method N No mount. C Clip mount. G Horizontal mount. Z Vertical mount. Product type means one of FVR, DQS, DSRA, DSRB, BSR, BSQ. Rated Wattage means power rating at End Resistance Value. Resistance Value (Ω) means maximum resistance value (End Resistance Value). Resistance Tolerance means precision range of End Resistance Value. 1. Power Rating of VR (Variable Resistor) is determined by the maximum resistance value (End Resistance Value). 2. Resistance and Power Rating should be decreased while you are adjusting the screw. Notes:

• Adjustability is 10% to 90% of full resistance value.
• Wattage is proportional to this adjusted resistance value. Power Rating:
• Based on 25°C free air rating. The stated wattage rating applies only when the entire resistance is in the circuit.
• Setting the lug at an intermediate point reduces the wattage rating by approximately the same proportion.
• Example: If the lug is set at half resistance, the wattage is reduced by approximately one-half. If you need current constant type or special specifications, please feel free to cntact us. Version 2010 DRS Power Adjustable ResistorsTOKEN Back to 1st Page - Round-Wire Power Adjustable Resistors (DRS)