DCA1-5C10 OMRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

T-branch Taps and Terminal-block Terminator T-branch Taps Create One or Three Branch Lines

Ordering Information

Product Appearance Model Specification T-branch Tap for 1 branch line DCN1-1C Provided with 3 connectors, standard terminating resistor T-branch Tap for 2 branch lines DCN1-3C Provided with 5 connectors, standard terminating resistor Connector XW4B-05C1-H1-D --- DeviceNet Cables Thin cables DCA1-5C10 Outer diameter: 7.00 mm Length: 100 m Thick cables DCA2-5C10 Outer diameter: 11.6 mm Length: 100 m Terminal-block Terminator DRS1-T Resistance of 121 W

Model Comments Manufacturer MSTB2.5/5-ST-5.08-AU For node connection Phoenix Contact Corporation MSTBP2.5/5-STF-5.08-AB AU SO For T-branch Tap connection (with screws to secure the connector) Phoenix Contact Corporation Specifications Ratings/Characteristics Rated current Between main lines: 8 A (power supply line) and 2 A (signal line) Between main and branch lines: 3 A (power supply line) and 1 A (signal line) Insulation resistance 100 MW min. (at 500 VDC) Dielectric strength 500 VAC for 1 min, leakage current: 1 mA max. Ambient temperature Operating: 0°C to 55°C Materials Item Component Materials Unit Main and Expansion Units PBT resin with glass (UL14V-0)/gray DIN track lock POM resin/yellow Terminal block connector (see note) Housing PA66 resin (UL94V-0)/gray Contact Phosphor bronze coated with gold PCB Glass epoxy resin Note: The DCD1-1C is a product of Phoenix Contact. Dimensions Note: All units are in millimeters unless otherwise indicated. DCN1-1 (With No Branching Connector) DCN1-1C (With Three Branching Connectors) Internal Circuit Socket for terminator connection Main lineMain line Branch line *(See note) Terminal no.

1 V--

2 CAN-L

3 DRAIN

4 CAN-H

Two, 4 dia. or M4 Note: When connecting a branch line to the main line, connect the main line to the connector marked with an asterisk because the resistance between the asterisked portion is minimal.

DCN1-3 (With No Branching Connector) DCN1-3C (With Five Branching Connectors) Note: When connecting a branch line to the main line, connect the main line to the connector marked with an asterisk because the resis- tance between the asterisked portion is minimal. Socket for terminator connection* (See note) Main line Main line Branch line Branch line Branch line Internal Circuit Terminal no. Two, 4 dia. or M4 XW4B-05C1-H1-D (Connector) Cable insertion port Cable insertion port

DRS1-T Terminal-block Terminator Two, 4.4 dia. 41 max. 30±0.2 6+0.1 - -0 Mounting Holes Two, 4.2 dia. or M4 20 max. 21 max. Precautions Refer to the DeviceNet Operation Manual (W267) before using the Unit. Correct Use Refer to the DeviceNet Operation Manual (W267) for connecting or wiring T-branch Taps. OMRON ELECTRONICS, INC. One East Commerce Drive Schaumburg, IL 60173 NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. 1-800-55-OMRON OMRON CANADA, INC.

885 Milner Avenue

Scarborough, Ontario M1B 5V8 416-286-6465 R