DRR1-23XX HP | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- Low Noise PHEMT MMIC Front End Amplifier
- Image Reject Mixer
- Integrated Silicon Bipolar VCO Local Oscillator
- Low Phase Noise
- Operated Over -30 °C to +70°C
- Excellent Tuning Linearity
- Sample Output for Phase Locking DRR1-23XX VCO operating in the S/C band as the local oscillator. A portion of the oscillator output is coupled off and is applied to a frequency divider network. The low fre- quency output from the frequency divider can then be easily used to phase lock the source. The local oscillator output is applied to a frequency multiplier network to produce the desired LO frequency to the mixer.
Applications
This digital radio receiver module provides the total RF receive and down conversion function in radios operating in the 21.2 to 23.6␣ GHz band. Block Diagram MMIC MMICMSA-1100 MMIC MIXER MMICMMICBPF BPF RF Input IF Output Signal Sample Output Tuning Voltage Receiver Module 21.2 to
23.6 GHz
DC Circuit Power +8.5 Volts 10 +5.0 Volts +5.5 -5.0 Volts -5.5 Tuning Voltage Volts 14 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. A thermal interface medium must be used between the bottom of the package and its mating surface to ensure optimum heat transfer. Parameters Units Min. Typ. Max. RF Tuning Range GHz 21.2 23.6 IF Frequency MHz 630 or 1260 IF Bandwidth MHz ± 20 LO Frequency GHz 20.57 22.97 or 19.94 or 22.34 Gain dB 18 26 Gain Flatness over 300 MHz dB ±1 Noise Figure dB 4.5 5.5 Operating Temperature Range °C -30 70 Storage Temperature Range °C -45 85 Power Input at P-1dB dBm -22 -17 LO Leakage at I[1] dBm -15 LO Leakage at R[2] dBm -15 Return Loss RF Port dB 12 Return Loss IF Port dB 14 Image Rejection dB 12 15 Sample Out Frequency MHz 857 957 or 831 or 931 Sample Out Power dBm -10 0 Spurious Output[3] dBc -60 Phase Noise @ 100 KHz dBc/Hz -85 -82 Tuning Voltage V 1 12 Input Capacitance, Nom pf 1,000 LO Tuning Sensitivity MHz/V 300 500 LO Tuning Sensitivity Variation 1.5 : 1 2.0:1 DC Circuit Power: 8.5 Volts mA 300
5 Volts mA 400
-5 Volts mA 30 Case Dimensions inches 3.5 x 1.25 x 0.40 Max Power at Input/no damage dBm 10 Humidity Non Condensing % 85 Condensing % 95 Connectors WR 42 or SMA Notes: 1. LO and Harmonic/sub-harmonic leakage at I with RF terminated into a 50␣ Ω load. 2. LO and Harmonic/sub-harmonic leakage at R up to 50 GHz. 3. Measured at IF port within the IF bandwidth with single tone RF input of <-20 dBm.
Case Dimensions (specified in inches) 1.250 11x .200 2.700 3.50 1.10 8x .100 1.70 2.35 .120 11x .220 11x Ø .025 .670 .170 .420.640 4X 4-40 UNC-2B .120 DETAIL A SEE DETAIL A .820 6x Ø .125 .120THRU .445 .500 .500.445 GND GND GND VT +8.5V -5V +5V +8.5V +5V DRRI-23XX S/N XXXX D/C XXXX F/4 H 2.430 .40 MAX .375 Ø .067 –.001 .100