DRACN

DRACN CRYDOM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. DRACN Series

• 6.2mm Din-Rail Mount (35 mm) SSR Assembly
• Ratings 24VDC @ 3.5A, 48VDC @ 100mA and 240VAC @ 2A
• UL & cUL recognized @ 40°C, 100K-Cycle Endurance Test (SSR Only)
• AC output SSR is UL rated for Pilot Duty @ 240VAC
• CE & RoHS Compliant
• Yellow LED input status indicator
• 5 & 24 VDC Control OUTPUT SPECIFICATIONS (1)

Description

Operating Voltage 0-24 VDC Maximum Load Current @ 40°C (2) 3.5 A Minimum Load Current [mA] 1 Maximum Blocking Voltage 30 VDC Maximum Surge Current [Apk] 9 A (10 ms) Maximum I²t for fusing 50/60Hz (1/2 cycle) [A² sec] N.A. 0.001 Maximum PWM (Hz) (3) 500 Maximum Off-State Leakage Current @ Rated Voltage [mA] Typical On-State Voltage Drop @ Rated Current (V) 0.4 PRODUCT SELECTION Control Voltage 3.5 A 100 mA 3-12 VDC DRA-CN024D05 DRA-CN024D2415-30 VDC DRA-CN048D24 DRA-CN048D05 2 A DRA-CN240A24 DRA-CN240A05 DRA-CN024DXX 24-250 VAC 2 A

600 VAC

120/115 A (16.6/20 ms) 4.0 N.A. 1.1 DRA-CN240AXX 0-48 VDC 100 mA

60 VDC

300 mA (10 ms) N.A. 0.001 500 1.0 DRA-CN048DXX INPUT SPECIFICATIONS for CN024 (1)

3.0 VDC

1.0 VDC

500 Ohm

10 mA @ 5.0 VDC 120 /uni03BCs 120 /uni03BCs DRA-CN024D24 15-30 VDC

15 VDC

2.67K Ohm 2.67K Ohm 350 /uni03BCs 80 /uni03BCs Typical Turn-Off Time AVAILABLE OPTIONS Required for valid part number For options only and not required for valid part number DRA-CN Series Load Voltage 024D: 24 VDC, 3.5 A 048D: 48 VDC, 0.1 A 240A: 240 VAC, 2 A Assembly Input Voltage 05: 05 VDC 24: 24VDC 024D D Switching Mode Blank: Zero Cross Turn-On (AC Output Only) R: Random Turn On (AC Output Only) DCAC

Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. INPUT SPECIFICATIONS for CN048 (1) INPUT SPECIFICATIONS for CN240 GENERAL SPECIFICATIONS (1) DRA-CN048D05Description Control Voltage Range 3-12 VDC Must Turn On Voltage 3.0 VDC Must Turn Off Voltage 1.0 VDC 5 VDC Nominal Input Impedance 833 Ohm Typical Input Current 6 mA @ 5.0 VDC Typical Turn-On Time 20 /uni03BCs Typical Turn-Off Time 130 /uni03BCs DRA-CN048D24 15-30 VDC 3.43K Ohm 7 mA @ 24 VDC 20 /uni03BCs 130 /uni03BCs DRA-CN240A05Description Control Voltage Range 3-12 VDC Must Turn On Voltage 3.0 VDC Must Turn Off Voltage 1.0 VDC 5 VDC Nominal Input Impedance 333 Ohm Typical Input Current 15 mA @ 5.0 VDC Typical Turn-On Time 1/2 Cycle Typical Turn-Off Time 1/2 Cycle DRA-CN240A24 15-30 VDC 3.43K Ohm 7 mA @ 24 VDC 1/2 Cycle 1/2 Cycle (1) All parameters at 25°C unless otherwise specified. (2) See derate curves for more information (3) Operating frequency above 500Hz will damage the SSR (DC output only). (4) Turn-on time for random turn-on version is 0.1msec (5) 3.75KV for CN048Dxx ParametersDescription Dielectric Strength, Input/Output (50/60Hz) (5) 2.5 KV Maximum Capacitance, Input/Output 1.5 pF Ambient Operating Temperature Range -25 to 60°C Ambient Storage Temperature Range Weight (typical) -40 to 80°C Housing Material 0.067 lb (31g) Overvoltage Category UL 94 V0 Polution Degree III Degree of protection (SSR Encapsulation) Max. Torque (output screws) IP67 Max. Wire Size (load side) 5-7 in lb (0.56-0.8 Nm) 24-14 AWG Solid or Stranded GENERAL NOTES

Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. THERMAL DERATE INFORMATION MECHANICAL SPECIFICATIONS 3.5 3.0 1.0 0.5 3020 40 50 60 No spacing Ambient Temperature (ºC) DERATING CURVE: DRA-CN024DXX DERATING CURVE: DRA-CN048DXX DERATING CURVE: DRA-CN240AXX Load Current (Amps) 1.5 2.5 2.0 0.1 0.08 0.06 0.04 0.02 20 30 40 50 Ambient Temperature (ºC) Load Current (Amps) 1.5 0.5 30 40 50 60 Ambient Temperature (ºC) Load Current (Amps) No spacing Required

6.2 Spacing

Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters]

Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. AGENCY APPROVALS ACCESSORIES Designed in accordance with the requirements of IEC 62314 AGENCY APPROVALS E334072. AC output relay is UL rated for Pilot Duty @ 240VAC Rev. 052112 ID Marker Strips CNLB, CNLN, CNL2 Blank Strips Part no.: CNLB A package of 10 plastic strips comprising 10 individual unprinted markers which can be placed on sockets’ terminal block for easy identification during the use of multiple units. Numbered 1 to 10 Strips Part no.: CNLN A package of 10 plastic strips comprising 10 markers printed individual 1 to 10 which can be placed on sockets’ terminal block for easy identification during the use of multiple units. Numbered 1 to 10 Strips Part no.: CNL2 A package of 10 plastic strips comprising 10 markers printed individual 11 to 20 which can be placed on sockets’ terminal block for easy identification during the use of multiple units.

Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH.

• Disconnect all power before installing or working with this equipment.
• Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION.
• Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
• Verificar todas las conexiones y colocar todas las tapas antes de energizer el equipo. El incumplimiento de estas instrucciones puede provocar la muerte o lesiones serias. GEFAHR EINES ELEKTRISCHE N SCHLAGES ODER EINER EXPLOSION.
• Stellen Sie jeglichen Strom ab, der dieses Gerät versorgt, bevor Sie an dem Gerät Arbeiten durchführen
• Vor dem Drehen auf Energie alle Anschlüsse überprüfen und alle Abdeckungen ersetzen. Unterlassung dieser Anweisungen können zum Tode oder zu schweren Verletzungen führen. RISCHIO DI SCOSSA ELETTRICA O DELL’ESPLOSIONE.
• Spenga tutta l'alimentazione che fornisce questa apparecchiatura prima di lavorare a questa apparecchiatura
• Verificare tutti i collegamenti e sostituire tutte le coperture prima dell’accensione L'omissione di queste istruzioni provocherà la morte o lesioni serie 存在电击、 爆炸或电弧 闪烁危险
• 在操作此设 备之前请先 关闭电源。 若不遵守这些说明， 可能会导致严重的 人身伤害甚至死亡。 WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE
• The product's side panels may be hot, allow the product to cool before touching.
• Follow proper mounting instructions including torque values.
• Do not allow liquids or foreign objects to enter this product. Failure to follow these instructions can result in serious injury, or equipment damage. Die Nichtbeachtung dieser Anweisung kann Körperverletzung oder Materialschäden zur Folge haben. GEFAHR VON MATERIALSCHÄDEN UND GEHÄUSEERHITZUNG
• Die Seitenwände können heiß sein. Lassen Sie das Produkt abkühlen, bevor Sie es berühren.
• Beachten Sie die Montageanweisungen,
• Führen Sie keine Flüssigkeiten oder Fremdkörper in das Produkt ein. Si no se respetan estas precauciones pueden producirse graves lesiones, daños materiales. RIESGO DE DAÑOS MATERIALES Y DE SOBRECALENTAMIENTO DE LA UNIDAD
• Los paneles laterales del producto pueden estar calientes. Esperar que el producto se enfríe antes de tocarlo.
• Respetar las instrucciones de montaje, y en particular los pares de apretado.
• No dejar que penetren líquidos o cuerpos extraños en el producto. ono La mancata osservanza di questa precauzione può causare gravi rischi per l'incolumità personale o danni alle apparecchiature. RISCHIO DI DANNI MATERIALI E D'INVOLUCRO CALDO
• I pannelli laterali dell'apparecchio poss scottare; lasciar quindi raffreddare il prodotto prima di toccarlo.
• Seguire le istruzioni di montaggio corrette.
• Non far entrare liquidi o oggetti estranei in questo apparecchio. 如不能正确执行这些操作说明， 极有可能造成严重人体伤害或者设备的损坏。 材料损坏和高温外壳的危险性
• 产品的一侧面板可能很热，在其冷却前请 不要触碰。
• 遵照正确的安装说明，包括扭矩值。
• 请勿让液体及其他异物进入本产品。 RISQUE DE DESCHARGE ELECTRIQUE OU EXPLOSION
• Eteindre toutes les sources d'énergie de cet appareil avant de travailler dessus de cet appareil
• Vérifier tous connections, et remettre tous couverts en olace avant de mettre sous De non-suivi de ces instructions provoquera la mort ou des lésions sérieuses sérieuses. RISQUE DE DOMMAGE MATERIEL ET DE SURCHAUFFE DU BOITIER
• Les panneaux latéraux du produit peuvent être chauds. Laisser le produit refroidir avant de le toucher.
• Respecter les consignes de montage, et notamment les couples de serrage.
• Ne pas laisser pénétrer de liquide ni de corps étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, des lésions corporelles graves ou des dommages matériels.

Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Name Toxic or hazardous Substance and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium (Cr (VI)) biphenyls (PBB) diphenyl ethers (PBDE) Semiconductor die Solder 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 有毒有害物质或元素件部 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点