DRA3R

DRA3R CRYDOM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Control Voltage 4.2A2.4A 4-6 VDC Control DRA3R48D2, DRA3R40D2 DRA3R48D4, DRA3R40D4 18-28 VDC Control DRA3R48E2, DRA3R40E2 DRA3R48E4, DRA3R40E4 36-60 VAC Control DRA3R48C2, DRA3R40C2 DRA3R48C4, DRA3R40C4 90-140 VAC Control DRA3R48B2, DRA3R40B2 DRA3R48B4, DRA3R40B4 200-265 VAC Control DRA3R48A2, DRA3R40A2 DRA3R48A4, DRA3R40A4 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS AC Output Description DRA3R40xx Operating Voltage (47-63Hz) [Vrms] 48-415 48-510 Transient Overvoltage [Vpk] 1200 1600 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 3.0 3.5 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] 500 500 Minimum Load Current [Arms] 0.15 0.15 Maximum Resistive Load Current (UL508,AC51) [Arms] (2) 2.4/2.4 4.2/3.5 Maximum Motor Load Current (UL508,AC53) [Arms] (2) 2.1/2.1 3.4/3.4 Maximum On-State Voltage Drop @ Rated Current [Vrms] 1.15 per channel 1.15 per channel Maximum Surge Current (50/60 Hz, 1 cycle) [Apk] 285/300 285/300 Maximum I²t for Fusing (50/60 HZ, 1/2 cycle) [A² sec] 410/375 410/375 HP/IEC 60947 Rating @ 240VAC, 40°C [HP/KW] 1/2 / 0.37 1.0 / 0.75 HP/IEC 60947 Rating @ 400VAC, 40°C [HP/KW] 1.0 / 0.75 1.5 / 1.1 HP/IEC 60947 Rating @ 480VAC, 40°C [HP/KW] 1.0 / 0.75 2.0 / 1.5 Minimum Power Factor (with Maximum Load) 0.5 0.5 Min/Max stranded/solid wire [AWG] 24/10 24/10 Min/Max stranded/solid wire [AWG] 24/10 24/10 Load Terminal Screw Torque Range: 12.0 in lb (1.36 Nm) 12.0 in lb (1.36 Nm) DRA3R Series

• Three Phase Motor Reversing Contactor
• Ratings of 2.4 & 4.2 Amps
• Load voltage range of 48-510 VAC, 3-Phase
• Fits standard 35mm DIN-RAIL
• LED input status indicator, Forward (green), Reverse (yellow)
• AC or DC control
• cUL Recognized, IEC Rated, CE, CCC & RoHS Compliant, Horsepower Rated
• Built in Overvoltage Protection Series Operating Voltage 40: 48-415 VAC 48: 48-510 VAC Rated Load Current 2: 2.4 Amp/1HP @ 480 VAC 4: 4.2 Amp/2HP @ 480 VAC Control Voltage D: 4-6 VDC E: 18-28 VDC A: 200-265 VAC B: 90-140 VAC C: 36-60 VAC Function 3R: Motor Reverser

448 DDRA 3R

Required for valid part number For options only and not required for valid part number DRA3R48xx (1) Rated Operating Voltage [Vrms] 400 480 Start / Stop Reversing (3, 4) Description DRA3R4xx2 DRA3R4xx4 (1)OUTPUT SPECIFICATIONS AC Output DatasheetDIN Rail Mount Contactor Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

DRA3R4xAxDRA3R4xBxDRA3R4xCxDRA3R4xExDRA3R4xDxDescription Control Voltage Range 4-6 VDC 18-28 VDC 36-60 VAC 90-140 VAC 200-265 VAC Minimum Turn-On Voltage 4 VDC 18 VDC 36 VAC 90 VAC 200 VAC Minimum Turn-Off Voltage 2 VDC 4 VDC 10 VAC 20 VAC 60 VAC Minimum Input Current [mA] 15 15 6 5 5.5 Maximum Input Current [mA] 30 20 10 8 7.7 Maximum Turn-On Time [msec] 120 120 130 130 130 Nominal Input Impedance [ohms] 100 1.2 K 4.8 K 16.4 K 36 K Maximum Turn-Off Time [msec] 10 10 20 20 20 Min/Max stranded/solid wire [AWG] 24/12 24/12 24/12 24/12 24/12 GENERAL SPECIFICATIONS ParametersDescription Maximum Capacitance, Input/Output 20 pF Dielectric Strength, Input/Output (50/60Hz) 4000Vrms Minimum Insulation Resistance (@ 500 V DC) 10 9 Ohms Maximum Capacitance, Input/Output 20 pF Ambient Operating Temperature Range -20ºC to 60ºC Ambient Storage Temperature Range -30ºC to 85ºC Weight (typical) 6.5 oz. (185g) Housing Material (bottom cover) PVC Class V0 (UL94) Housing Material (end pieces) Polyamide Class V0 (UL94) GENERAL NOTES (1) All parameters at 25°C unless otherwise specified. (2) Mounted in the Vertical position (Din Rail in horizontal position). MECHANICAL SPECIFICATIONS Tolerances: ± 0.02 in / 0.5 mm - All dimensions are in: inches [millimeters] 2.91 [73.9] 2.22 [56.3] 1.48 [37.7] 3.53 [89.6] R ASSEMBLED IN MEXICO SSR-DC-4 DRA3R48D4 480V 4.2A 2HP@480VAC +R +F CONTROL AC LINE L3 L2 L1 1102 5VDC T3 T2 T1 LOAD 2.43 [61.7] 2.04 [51.7] (1) (1) Rated Input Control Voltage 5 VDC 24 VDC 48 VAC 120 VAC 230 VAC LED Status Indicator for Control Input Forward: Green / Reverse: Yellow (3) Internal overvoltage protection will activate between 600-750Vpk for DRA3R40xx (4) Internal overvoltage protection will activate between 750-900Vpk for DRA3R48xx DatasheetDIN Rail Mount Contactor Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Resistive Load Current (Amps) 0.0 1.0 2.0 3.0 4.0 5.0 0 10 20 30 40 50 60 Ambient Temperature (°C) DRA3R4xx4 WIRING DIAGRAM THERMAL DERATE INFORMATION BLOCK DIAGRAM MOTOR Source~/+ -/~ F R LED Overvoltage Protection Overvoltage Protection TriggerPhoto receiver Photo receiver LED FORWARD STATUS INDICATOR REVERSE STATUS INDICATOR INPUT CONTROL CIRCUIT Trigger F LED Overvoltage Protection Overvoltage Protection TriggerPhoto receiver Photo receiver LED Trigger R INTERLOCK AGENCY APPROVALS E116949 Rev. 071614 (Except DRA3R40xx) DatasheetDIN Rail Mount Contactor Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. Agency Approvals

DatasheetDIN Rail Mount Contactor Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH.

• Disconnect all power before installing or working with this equipment.
• Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION.
• Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
• Verificar todas las conexiones y colocar todas las tapas antes de energizer el equipo. El incumplimiento de estas instrucciones puede provocar la muerte o lesiones serias. RISQUE DE DESCHARGE ELECTRIQUE OU EXPLOSION
• Eteindre toutes les sources d'énergie de cet appareil avant de travailler dessus de cet appareil
• Vérifier tous connections, et remettre tous couverts en olace avant de mettre sous De non-suivi de ces instructions provoquera la mort ou des lésions sérieuses sérieuses. GEFAHR EINES ELEKTRISCHE N SCHLAGES ODER EINER EXPLOSION.
• Stellen Sie jeglichen Strom ab, der dieses Gerät versorgt, bevor Sie an dem Gerät Arbeiten durchführen
• Vor dem Drehen auf Energie alle Anschlüsse überprüfen und alle Abdeckungen ersetzen. Unterlassung dieser Anweisungen können zum Tode oder zu schweren Verletzungen führen. RISCHIO DI SCOSSA ELETTRICA O DELL’ESPLOSIONE.
• Spenga tutta l'alimentazione che fornisce questa apparecchiatura prima di lavorare a questa apparecchiatura
• Verificare tutti i collegamenti e sostituire tutte le coperture prima dell’accensione L'omissione di queste istruzioni provocherà la morte o lesioni serie 存在电击、 爆炸或电弧 闪烁危险
• 在操作此设 备之前请先 关闭电源。 若不遵守这些说明， 可能会导致严重的 人身伤害甚至死亡。 WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE
• The product's side panels may be hot, allow the product to cool before touching.
• Follow proper mounting instructions including torque values.
• Do not allow liquids or foreign objects to enter this product. Failure to follow these instructions can result in serious injury, or equipment damage. RISQUE DE DOMMAGE MATERIEL ET DE SURCHAUFFE DU BOITIER
• Les panneaux latéraux du produit peuvent être chauds. Laisser le produit refroidir avant de le toucher.
• Respecter les consignes de montage, et notamment les couples de serrage.
• Ne pas laisser pénétrer de liquide ni de corps étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, des lésions corporelles graves ou des dommages matériels. Die Nichtbeachtung dieser Anweisung kann Körperverletzung oder Materialschäden zur Folge haben. GEFAHR VON MATERIALSCHÄDEN UND GEHÄUSEERHITZUNG
• Die Seitenwände können heiß sein. Lassen Sie das Produkt abkühlen, bevor Sie es berühren.
• Beachten Sie die Montageanweisungen,
• Führen Sie keine Flüssigkeiten oder Fremdkörper in das Produkt ein. Si no se respetan estas precauciones pueden producirse graves lesiones, daños materiales. RIESGO DE DAÑOS MATERIALES Y DE SOBRECALENTAMIENTO DE LA UNIDAD
• Los paneles laterales del producto pueden estar calientes. Esperar que el producto se enfríe antes de tocarlo.
• Respetar las instrucciones de montaje, y en particular los pares de apretado.
• No dejar que penetren líquidos o cuerpos extraños en el producto. La mancata osservanza di questa precauzione può causare gravi rischi per l'incolumità personale o danni alle apparecchiature. RISCHIO DI DANNI MATERIALI E D'INVOLUCRO CALDO
• I pannelli laterali dell'apparecchio possono scottare; lasciar quindi raffreddare il prodotto prima di toccarlo.
• Seguire le istruzioni di montaggio corrette.
• Non far entrare liquidi o oggetti estranei in questo apparecchio. 如不能正确执行这些操作说明， 极有可能造成严重人体伤害或者设备的损坏。 材料损坏和高温外壳的危险性
• 产品的一侧面板可能很热，在其冷却前请 不要触碰。
• 遵照正确的安装说明，包括扭矩值。
• 请勿让液体及其他异物进入本产品。

ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Name Toxic or hazardous Substance and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium (Cr (VI)) biphenyls (PBB) diphenyl ethers (PBDE) Semiconductor die Solder 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 有毒有害物质或元素件部 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点 DatasheetDIN Rail Mount Contactor Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.