DRA1_V01 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

  • 10mm Single Channel DIN Rail Mount SSR Assembly
  • AC Ratings up to 380 VAC and 5 Amps
  • 3-15 and 15-32 VDC Control
  • Cage style screw terminals for easy connection
  • Fits standard 35mm DIN rail
  • Includes LED status indicator Description CX(E)240x5 CX(E)380x5 Operating Voltage [VAC] 12 - 280 48 - 380** Transient Overvoltage [Vpk] 600 1200 Maximum Load Current [Arms] (3) 5 5 Minimum Load Current [Arms] 0.06 0.06 Maximum Off-Sate Leakage Current @ Rated Voltage [mArms] 0.1 0.1 Maximum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (4) 500 500 Maximum 1 Cycle Surge Current (50/60 Hz) [Apk] 239 / 250 239 / 500 Maximum I2t for Fusing (50/60 Hz, ½ Cycle) [A2 Sec] 285 / 260 285 / 260 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.4 1.4 Control Voltage 5 A 5 A 5 A 5 A 5 A 3 - 15 VDC Control DRA1-CX240D5 DRA1-CX240D5-B (2) DRA1-CX240D5R 4 - 15 VDC Control DRA1-CXE240D5R DRA1-CX380D5R 15 - 32 VDC Control DRA1-CXE240D5 DRA1-CXE240D5R DRA1-CXE380D5 DRA1 SERIES | CX DC INPUT DIN RAIL MOUNT SOLID STATE RELAYS PRODUCT SELECTION

www.sensata.comCopyright © 2025 Sensata Technologies, Inc. Description DRA1-CX DRA1-CX240D5-B DRA1-CX380D5 DRA1-CXE Control Voltage Range 3 - 15 VDC 4 - 28 VDC 4 - 15 VDC 15 - 32 VDC Must Turn-On Voltage 3.0 VDC 1.0 VDC 4.0 VDC 15.0 VDC Must Turn-Off Voltage 1.0 VDC 4.0 VDC 1.0 VDC 1.0 VDC Typical Input Current 15 mAdc 10 mAdc 15 mAdc 15 mAdc Nominal Input Impedance 300 Ohms 1360 Ohms 240 Ohms 1500 Ohms Maximum Turn-On Time [msec] (5) ½ Cycle ½ Cycle ½ Cycle ½ Cycle Maximum Turn-Off Time [msec] ½ Cycle ½ Cycle ½ Cycle ½ Cycle Description Parameters Dielectric Strength, Input/Output (50/60 Hz) 4000 Vrms Maximum Insulation Resistance (@ 500 VDC) 109 Ohms Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -30 to 80°C Ambient Storage Temperature -30 to 125°C Weight (Typical) 0.063 lb (28.6 g) Encapsulation Thermally Conductive Epoxy Input (1) General (1) WIRING DIAGRAM (A) (A) Wiring diagram is identical for each individual section whether it is a single or four channel assembly. (B) Load can be placed on either side of “Power” For additional information or specific questions, contact Sensata Technical Support. MECHANICAL SPECIFICATIONS Tolerances: ±0.02 in / 0.5 mm All dimensions are in inches [millimeters]

+1 (800) 350 2727 sales.crydom@sensata.com Europe, Middle East & Africa +44 (1202) 416170 ssr-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 Rev: 02/06/25 ECN 20395 FDE-07-01 Rev. B www.sensata.com CONTACT USCopyright © 2025 Sensata Technologies, Inc. Datasheets provided by Sensata Technologies, Inc., its subsidiaries and/or affiliates (“Sensata”) are solely intended to assist third parties (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata datasheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular datasheet. Sensata may make corrections, enhancements, improvements, and other changes to its datasheets or components without notice. Buyers are authorized to use Sensata datasheets with the Sensata component(s) identified in each particular datasheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATASHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATASHEETS OR USE OF THE DATASHEETS, EXPRESS, IMPLIED, OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATASHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY , AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. GENERAL NOTES THERMAL DERATE INFORMATION (1) All parameters at 25 °C unless otherwise specified. (2) The output is normally closed and does not have an LED status indicator. (3) See Derating Chart on page 4. (4) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 (5) Turn-on time for DC control random turn-on versions is 0.1 msec For additional information or specific questions, contact Sensata Technical Support. AGENCY APPROVALS & CERTIFICATIONS WARNINGS RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE

  • The product’s side panels may be hot, allow the product to cool before touching
  • Follow proper mounting instructions including torque values
  • Do not allow liquids or foreign objects to enter this product Failure to follow these instructions can result in serious injury, or equipment damage. HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
  • Disconnect all power before installing or working with this equipment
  • Verify all connections and replace all covers before turning on power Failure to follow these instructions will result in death or serious injury. Agency certifications are for relay only (not for complete assembly). Normally closed version (-B suffix) doesn't have UL, CSA or VDE certifications. E116950 LR 81689