DR65-0109 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • High Speed CMOS Technology
  • Complementary Outputs
  • Positive Voltage Control
  • Low Power Dissipation
  • Plastic SOIC Package for SMT Applications
  • Tape and Reel Packaging Available
  • SOIC-8 Package

Description

M/A-COM's DR65-0109 is a Single channel driver used to translate TTL control inputs into comple- mentary gate voltages for GaAs FET microwave switches and attenuators. High speed analog CMOS technology is utilized to achieve low power dissipation at moderate to high speeds, encompassing most microwave switching applications.

Ordering Information

DR65-0109TR 1000 piece reel Note: Reference Application Note M513 for reel size information. Pin Configuration Pin No. Function

1 VCC

2 VIN

3 GND

4 GND

5 GND

6 Output A

7 Output B

8 VEE

Guaranteed Operating Ranges Symbol Parameter1 Unit Min Typical Max VCC Positive DC Supply Voltage V 4.5 5.0 5.5 VEE Negative DC Supply Voltage V -5.5 -5.0 -4.5 VCC-VEE Positive to Negative Supply Range V 9.0 10.0 11.0 TA Operating Ambient Temperature °C -40 +25 +85 IOH DC Output Current - HIGH mA — — -1.0 IOL DC Output Current - LOW mA — — 1.0 Trise, Tfall Maximum Input Rise or Fall Time nS — — 500 1. All voltages are relative to GND

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Single Driver for GaAs FET Switches and Attenuators Rev. V4 DR65-0109 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Symbol Parameter Test Conditions Units Min Typ Max VIH Input HIGH Voltage Guaranteed HIGH Input Voltage V 2.0 — - VIL Input LOW Voltage Guaranteed LOW Input Voltage V - — 0.8 VOH Output HIGH Voltage IOH = -1 mA VEE = Max V - 0.1 — - VOL Output LOW Voltage IOL = 1 mA VEE = Max V — — VEE + 0.1 IIN Input Leakage Current VIN = VCC or GND VEE = Min µA -1.0 0 1.0 ICC Quiescent Supply Current VCC = Max VEE = Min VIN = VCC or GND µA — — 400 TPHL, TPLH Propagation Delay Guaranteed -40° C to + 85° C nS — — 50 TTHL, TTLH Output Transition Time Guaranteed -40° C to + 85° C nS — — 25 Delay Skew, Output A to Output B Guaranteed -40° C to + 85° C nS — — 8 AC & DC Characteristics Over Guaranteed Operating Range See Switching Wave Forms for the definition of the switching terms. Supplies must be by-passed with .01 µF Capacitors. Switching Waveforms TF TR TTLH TTHL TPLH TPHL 1.3 V 90% 50% 10% 90% 10% INPUT VIN GND LOGIC 1 LOGIC 0 OUTPUT A VOUT OUTPUT B VEE Absolute Maximum Ratings2,3 Parameter Absolute Maximum VCC - .5V to + 6.0 V VEE - 6.0 V to - .5 V VCC - VEE 12 V V IN 4 VCC + .5 V V OUT VEE - .5 V Storage Temperature -65°C to +150°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. Standard CMOS TTL interface, latch-up will occur if logic signal is applied prior to power supply. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Silicon Integrated Circui ts are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Truth Table Input Outputs VIN A B

0 VEE GND

1 GND VEE

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Single Driver for GaAs FET Switches and Attenuators Rev. V4 DR65-0109 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations.