DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
Designed for EMI Filters & Switching Power Supplies Inductance Range from 3.3µH to 150mH Operating Temp. -20°C to +80°C Dielectric Withstand Capability 400VAC Tinned Leads with Leaded Solder is Available (note 4) ELECTRICAL SPECIFICATIONS AT 25ºC
October 18, 2011 DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Fax: 951-928-7701 Email: ddisales@datatronics.com
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice. Page 2 of 2 SCHEMATIC ±0,50 TYP.433 MAX. 11,00 .590 MIN. 15,00 .039 MIN. 1,00 Ø .275 MAX. 7,00 Ø .025 0,65 .098 2,50 ±.020 XXX DR217-2 SERIES RADIAL LEADED INDUCTORS Part Number Inductance (uH) @1kHz Q Min. Q Test Freq. DCR (Ohm) Max. Rated DC Current (A) Max. DR217-2-226 22000 50 79.6kHz 60 0.045 DR217-2-306 30000 50 79.6kHz 91.5 0.040 DR217-2-336 33000 50 79.6kHz 98.5 0.035 DR217-2-396 39000 50 79.6kHz 140 0.032 DR217-2-476 47000 50 79.6kHz 160 0.030 DR217-2-506 50000 50 79.6kHz 170 0.029 DR217-2-566 56000 50 79.6kHz 250 0.028 DR217-2-686 68000 50 79.6kHz 282 0.025 DR217-2-826 82000 50 79.6kHz 312 0.023 DR217-2-107 100000 30 25.2kHz 380 0.020 DR217-2-127 120000 30 25.2kHz 430 0.018 DR217-2-157 150000 30 25.2kHz 520 0.016 MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions are shown in inches/millimeters 2. Unless otherwise specified, tolerance = Inches: ±0.012 = Millimeters: ±0,30 3. IDC MAX based on the inductance being 90% of its initial value 4. For non-RoHS parts replace DR prefix with 42- (e.g. DR217-2 becomes 42-217-2) 5. Terminal finish is compliant to RoHS requirements