DR217-1-102 DATATRONICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
z Designed for EMI Filters & Switching Power Supplies z Inductance Range from 1.0µH to 25mH z Operating Temp. -20°C to +80°C z Tinned Leads with Leaded Solder is Available (note 4) ELECTRICAL SPECIFICATIONS AT 25ºC
October 11, 2006 DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: ddisales@datatronics.com
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice. Page 2 of 2 SCHEMATIC ±0,50 TYP.315 MAX. 8,00 .590 MIN. 15,00 .039 MIN. 1,00 Ø. 1 9 6MAX. 5,00 Ø. 0 2 1 0,55 .078 2,00 ±.020 XXX DR217-1 SERIES RADIAL LEADED INDUCTORS Part Number Inductance (uH) @1kHz Q Min. Q Test Freq. SRF (MHz) Min. DCR (Ohm) Max. Rated DC Current (A) Max. DR217-1-564 560 ± 10% 50 796kHz 1.5 4.2 0.19 DR217-1-684 680 ± 10% 50 796kHz 1.3 4.6 0.17 DR217-1-824 820 ± 10% 50 796kHz 1.1 5.7 0.155 DR217-1-105 1000 ± 10% 90 252kHz 1 6.7 0.15 DR217-1-125 1200 ± 10% 90 252kHz 0.9 8.2 0.14 DR217-1-155 1500 ± 10% 80 252kHz 0.8 13 0.12 DR217-1-185 1800 ± 10% 80 252kHz 0.8 15 0.11 DR217-1-225 2200 ± 10% 80 252kHz 0.8 17 0.10 DR217-1-275 2700 ± 10% 80 252kHz 0.8 19 0.090 DR217-1-335 3300 ± 10% 70 252kHz 0.7 26 0.083 DR217-1-395 3900 ± 10% 70 252kHz 0.65 30 0.076 DR217-1-475 4700 ± 10% 65 252kHz 45 0.070 DR217-1-565 5600 ± 10% 65 252kHz 48 0.062 DR217-1-685 6800 ± 10% 65 252kHz 56 0.056 DR217-1-825 8200 ± 10% 65 252kHz 62 0.052 DR217-1-106 10000 ± 10% 45 79.6kHz 72 0.047 DR217-1-156 15000 ± 10% 45 79.6kHz 120 0.035 DR217-1-226 22000 ± 10% 45 79.6kHz 160 0.024 DR217-1-256 25000 ± 10% 45 79.6kHz 180 0.020 MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions are shown in inches/millimeters 2. Unless otherwise specified, tolerance = Inches: ±0.012 = Millimeters: ±0,30 3. IDC MAX based on the inductance being 90% of its initial value 4. For non-RoHS parts replace DR prefix with 42- (e.g. DR217-1 becomes 42-217-1) 5. Terminal finish is compliant to RoHS requirements