DMU-5010_14 ADVANTECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

Features

12-ch DI/O, 4-ch AI, 4-ch RTD Modbus TCP Module NEW ƒ Ethernet-based I/O ƒ Mixed I/O in single module ƒ Active I/O message by data stream ƒ Industrial Modbus/TCP protocol ƒ Easily update firmware through Ethernet ƒ Support burn-out detection ƒ Support Ethernet Daisy Chain ƒ Wide operating temperature range ƒ High anti-interference performance Introduction DMU-5010 is an Ethernet I/O module that supports Modbus TCP protocol and Ethernet daisy chain. DMU-5010 delivers various onboard I/Os including analog input, digital input, and digital output, providing flexible options to satisfy versatile application requirements. With high anti-interference performance, DMU-5010 is suitable for harsh environment applications. You can easily configure the module by the Advantech Domain Focused Configuration Tool. Specifications General ƒ Enclosure SECC ƒ Mounting DIN-rail,Wallmount ƒ Dimensions (WxHxD) 43 x 125 x 105 mm (1.69" x 4.92" x 4.13") ƒ LAN 10/100Base-T ƒ Connector 1x40 Plug-in screw terminal block (#14~22 AWG)(Power and I/O) 2 x RJ-45(LAN) ƒ Watchdog System (1.6 second) and Communication (programmable) ƒ Supported Protocols Modbus/TCP ƒ Power Input Unregulated10-30V DC w/power reversal protection ƒ Power Consumption 7.2W@ 24VDC Analog Input ƒ Channels 8 ƒ Input Type mV, V, mA(Ch0-Ch3), mV, V, mA, RTD (Ch4-Ch7) ƒ Input Range 0~5V,0~10V, 0~15V, ±5V, ±10V, ±15V, ±20mA, 0~20mA, 4~20mA ƒ RTD Types & Temp Range Pt 100 (2-wire and 3-wire): -50 ~150°C 0 ~ 100°C 0 ~ 200°C 0 ~ 400°C -200 ~ 200°C IEC RTD 100 ohms ( =0.0385 ) JIS RTD 100 ohms ( =0.0392 ) Pt-1000(2-wire and 3-wire): -40°C ~160°C ƒ Input Impedance Voltage: >10MΩ; Current:120Ω ƒ Accuracy ±0.1%, (voltage); ±0.2% (current); ±0.2°C (RTD) or better ƒ Span Drift ±68 ppm/°C (Voltage) ƒ Zero Drift ±6 μV/°C (Voltage) ƒ Resolution 16-bit ƒ Sampling Rate 10 samples/second ƒ Burn-out Detection 4~20mA and RTD ƒ Protection 50/60 Hz Noise rejection 2,500 VDC Isolation ±30VDC Overvoltage Digital Input /Output ƒ Channels: 8-ch DI 4-ch DI/DO shared (DIO0~DIO3 can be set as DI/DO by Utillity) Digital Input ƒ Input Level Dry contact: Logic level 0 (Off): open Logic level 1 (On): close to GND Wet contact: Logic level 0 (Off): +10V to +30V Logic level 1(On): +3V max Note: The Digital Input Level 0 and 1 status can be inverted by utility ƒ Supports 200Hz Frequency/counter input 2 channels max Counter (32 bit) 200Hz Frequency 0.1Hz~200Hz ƒ Supports Digital Noise filter ƒ Isolation Protection 2500 V DC Digital Output ƒ Output Open Collector to 30V 30mA max load. ƒ Power Dissipation 300mW for each channel ƒ PWM Period 2ms~3600sec ƒ PWM Minimum Duty On 0.2ms ƒ Isolation Protection 2500 V DC Environment ƒ Storage Humidity 5-95% RH ƒ Operation Temperature -20 ~ 70°C (-4 ~ 158°F) ƒ Storage Temperature -30 ~ 80°C (-22 ~ 176°F)

Ordering Information

ƒ DMU-5010-AE 8-ch DI. 4-ch DO, 8-ch AI, 4-ch RTD Modbus TCP Module RoHS COMPLIANT 2002/95/EC All product specifications are subject to change without notice Last updated : 25-Mar-2014