DMTH10H010SPS

DMTH10H010SPS

Document overview

• Manufacturer or author: Diodes Incorporated
• PDF pages: 8

Technical content

Features

• Rated to +175° C – Ideal for High Ambient Temperature Environments
• 100% Unclamped Inductive Switching – Ensures More Reliable and Robust End Application
• Low RDS(ON) – Minimizes On-State Losses
• Fast Switching Speed
• Qualified to AEC-Q101 Standards for High Reliability
• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
• Halogen- and Antimony-Free. “Green” Device (Note 3)
• An automotive-compliant part is available under a separate datasheet (DMTH10H010SPSQ). Mechanical Data
• Package: PowerDI5060-8
• Package Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminal Connections: See Diagram Below
• Terminals: Finish - Matte Tin Annealed over Copper Leadframe. Solderable per MIL-STD-202, Method 208
• Weight: 0.097 grams (Approximate) Ordering Information (Note 4) Orderable Part Number Package Packing Quantity Carrier DMTH10H010SPS-13 PowerDI5060-8 2,500 Tape & Reel Notes: 1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free/ for more information about Diodes Incorporated’s definitions of Hal ogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at https://www.diodes.com/design/support/packaging/diodes -packaging/. Bottom View Top View Pin Configuration Top View Internal Schematic PowerDI5060-8 Pin1 S D D G D D S S D S G Green PowerDI® is a registered trademark of Diodes Incorporated in the United States and other countries.

Document number: DS39423 Rev. 4 - 2 2 of 8 www.diodes.com August 2026 © 2026 Copyright Diodes Incorporated. All Rights Reserved. DMTH10H010SPS Marking Information Maximum Ratings (@ TA = +25° C, unless otherwise specified.) Characteristic Symbol Value Unit Drain-Source Voltage VDSS 100 V Gate-Source Voltage VGSS ±20 V Continuous Drain Current, VGS = 10V (Note 5) TA = 25° C TA = 100° C ID 15 11 A Continuous Drain Current, VGS = 10V (Note 6) TC = 25° C (Note 7) TC = 100° C ID 100 87 A Pulsed Drain Current (10μs Pulse, Duty Cycle = 1%) IDM 250 A Maximum Continuous Body Diode Forward Current IS 100 A Avalanche Current, L = 0.3mH IAS 25 A Avalanche Energy, L = 0.3mH EAS 93.7 mJ Avalanche Current (Note 8), L = 3mH IAS 14.3 A Avalanche Energy (Note 8), L = 3mH EAS 307 mJ Thermal Characteristics Characteristic Symbol Value Unit Total Power Dissipation (Note 5) TA = 25° C PD 3 W Thermal Resistance, Junction to Ambient (Note 5) RθJA 49 ° C/W Total Power Dissipation (Note 6) TC = 25° C PD 166 W Thermal Resistance, Junction to Case (Note 6) RθJC 0.9 ° C/W Operating and Storage Temperature Range TJ, TSTG -55 to 175 °C TH10H010S S S S G D D D D YY WW = Manufacturer’s Marking TH10H010S = Product Type Marking Code YYWW = Date Code Marking YY = Last Two Digits of Year (ex: 26 = 2026) WW = Week Code (01 to 53) PowerDI5060-8

Document number: DS39423 Rev. 4 - 2 3 of 8 www.diodes.com August 2026 © 2026 Copyright Diodes Incorporated. All Rights Reserved. DMTH10H010SPS Electrical Characteristics (@ TA = +25° C, unless otherwise specified.) Characteristic Symbol Min Typ Max Unit Test Condition OFF CHARACTERISTICS (Note 9) Drain-Source Breakdown Voltage BVDSS 100 — — V VGS = 0V, ID = 1mA Zero Gate Voltage Drain Current IDSS — — 1 µ A VDS = 80V, VGS = 0V Gate-Source Leakage IGSS — — ±100 nA VGS = ±20V, VDS = 0V ON CHARACTERISTICS (Note 9) Gate Threshold Voltage VGS(TH) 2 — 4 V VDS = VGS, ID = 250µA Static Drain-Source On-Resistance RDS(ON) — 6.6 8.8 mΩ VGS = 10V, ID = 13A — 8.5 11.5 VGS = 6V, ID = 13A Diode Forward Voltage VSD — 0.8 1.3 V VGS = 0V, IS = 13A DYNAMIC CHARACTERISTICS (Note 8) Input Capacitance Ciss — 4,468 — pF VDS = 50V, VGS = 0V f = 1MHz Output Capacitance Coss — 746 — Reverse Transfer Capacitance Crss — 32 — Gate Resistance Rg — 0.91 — Ω VDS = 0V, VGS = 0V, f = 1MHz Total Gate Charge Qg — 56.4 — nC VDD = 50V, ID = 13A, VGS = 10V Gate-Source Charge Qgs — 15.4 — Gate-Drain Charge Qgd — 14 — Turn-On Delay Time tD(ON) — 18.6 — ns VDD = 50V, VGS = 10V, ID = 13A, Rg = 6Ω Turn-On Rise Time tR — 22.5 — Turn-Off Delay Time tD(OFF) — 44.8 — Turn-Off Fall Time tF — 29.5 — Reverse-Recovery Time tRR — 54.5 — ns IF = 13A, di/dt = 100A/µs Reverse-Recovery Charge QRR — 106.4 — nC Notes: 5. Device mounted on FR-4 substrate PC board, 2oz copper, with thermal bias to bottom layer 1inch square copper plate. 6. Thermal resistance from junction to soldering point (on the exposed drain pad). 7. Package limited. 8. Guaranteed by design. Not subject to product testing . 9. Short duration pulse test used to minimize self-heating effect.

© 2026 Copyright Diodes Incorporated. All Rights Reserved. Figure 13. Transient Thermal Resistance

Document number: DS39423 Rev. 4 - 2 7 of 8 www.diodes.com August 2026 © 2026 Copyright Diodes Incorporated. All Rights Reserved. DMTH10H010SPS Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. A L K M G Detail A 0( 4X) c e D E Detail A b ( 8X) e/2 01 ( 4X) b2 ( 4X) b3 ( 4X)E3 X3 Y2 X C Y( 4x) G PowerDI5060-8 Dim Min Max Typ A 0.90 1.10 1.00 A1 0.00 0.05 − b 0.33 0.51 0.41 b2 0.200 0.350 0.273 b3 0.40 0.80 0.60 c 0.230 0.330 0.277 D 5.15 BSC D1 4.70 5.10 4.90 D2 3.70 4.10 3.90 D3 3.90 4.30 4.10 E 6.15 BSC E1 5.60 6.00 5.80 E2 3.28 3.68 3.48 E3 3.99 4.39 4.19 e 1.27 BSC G 0.51 0.71 0.61 K 0.51 − − L 0.51 0.71 0.61 L1 0.100 0.200 0.175 M 3.235 4.035 3.635 M1 1.00 1.40 1.21 Θ 10° 12° 11° Θ1 6° 8° 7° All Dimensions in mm Dimensions Value (in mm) C 1.270 G 0.660 G1 0.820 X 0.610 X1 4.100 X2 0.755 X3 4.420 X4 5.610 Y 1.270 Y1 0.600 Y2 1.020 Y3 0.295 Y4 1.825 Y5 3.810 Y6 0.180 Y7 6.610 PowerDI5060-8 PowerDI5060-8

Document number: DS39423 Rev. 4 - 2 8 of 8 www.diodes.com August 2026 © 2026 Copyright Diodes Incorporated. All Rights Reserved. DMTH10H010SPS IMPORTANT NOTICE 1. DIODES INCORPORATED (Diodes) AND ITS SUBSIDIARIES MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO ANY INFORMATION CONTAINED IN THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICU LAR PURPOSE OR NON -INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). 2. The Information contained herein is for informational purpose only and is provided only to illustrate the operation of Diodes ’ products described herein and application examples. Diodes does not assume any liability arising out of the application or use of this document or any product described herein. This document is intended for skilled and technically trained engineering customers and users who design with Diodes’ products. Diodes’ products may be used to facilitate safety-related applications; however, in all instances customers and users are responsible for (a) selecting the appropriate Diodes products for their applications, (b) evaluating the suitability of Diodes’ products for their intended applications, (c) ensuring their applications, which incor porate Diodes’ products, comply the applicable legal and regulatory requirements as well as safety and functional - safety related standards, and (d) ensuring they design with appropriate safeguards (including testing, validation, quality co ntrol techniques, redundancy, malfunction prevention, and appropriate treatment for aging degradation) to minimize the risks associated with their applications. 3. Diodes assumes no liability for any application-related information, support, assistance or feedback that may be provided by Diodes from time to time. Any customer or user of this document or products described herein will assume all risks and liabilities associated with such use, and will hold Diodes and all companies whose products are represented herein or on Diodes’ websites, harmless against all damages and liabilities. 4. Products described herein may be covered by one or more United States, international or foreign patents and pending patent applications. Product names and markings noted herein may also be covered by one or more United States, international or foreign trad emarks and trademark applications. Diodes does not convey any license under any of its intellectual property rights or the rights of any third parties (including third parties whose products and services may be described in this document or on Diodes’ website) under this document. 5. Diodes’ products are provided subject to Diodes’ Standard Terms and Conditions of Sale (https://www.diodes.com/about/company/terms-and-conditions/terms-and-conditions-of-sales/) or other applicable terms. This document does not alter or expand the applicable warranties provided by Diodes. Diodes does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. 6. Diodes’ products and technology may not be used for or incorporated into any products or systems whose manufacture, use or sa le is prohibited under any applicable laws and regulations. Should customers or users use Diodes’ products in contravention of any applicable laws or regulations, or for any unintended or unauthorized application, customers and users will (a) be solely responsible for any da mages, losses or penalties arising in connection therewith or as a result thereof, and (b) indemnify and hold Di odes and its representatives and agents harmless against any and all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim relating to any noncompliance with the applicable laws and regulations, as well as any unintended or unauthorized application. 7. While efforts have been made to ensure the information contained in this document is accurate, complete and current, it may c ontain technical inaccuracies, omissions and typographical errors. Diodes does not warrant that information contained in this docum ent is error-free and Diodes is under no obligation to update or otherwise correct this information. Notwithstanding the foregoing, Diodes reserves the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes. 8. Any unauthorized copying, modification, distribution, transmission, display or other use of this document (or any portion her eof) is prohibited. Diodes assumes no responsibility for any losses incurred by the customers or users or any third parties arising from any such unauthorized use. 9. This Notice may be periodically updated with the most recent version available at https://www.diodes.com/about/company/terms-and- conditions/important-notice The Diodes logo is a registered trademark of Diodes Incorporated in the United States and other countries. All other trademarks are the property of their respective owners. © 2026 Diodes Incorporated. All Rights Reserved. www.diodes.com