DMR251T75R_11 DUBILIER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
RESISTORS PRECISION METAL FILM DMR 0.6W in 0.25W size 1%, E-96 values The DMR range is available in power ratings from 1/6W to 2W. The DMR25 offers a nominal 0.6W power rating in a standard 1/4W size. Resistors are manufactured to JIS-5202 specifications and tested following MIL-R-22684, giving repeatable performance between batches. All product is coloured light blue with an easily readable 5-colour code. D H HL d TYPE L øD H ød Type Power/W Range, E24 & E96 Temperature Coefficient Max. Working Voltage (70°C) Max. Overload Voltage (70°C) DMR12 0.166 10Ω-1MΩ 50ppm 200 400 DMR25 0.6 10Ω-1MΩ 50ppm 300 600 DMR100 1 10Ω-1MΩ 100ppm 500 1000 DMR200 2 10Ω-1MΩ 100ppm 500 1000 DMR 25 1 T 75R Type 12 = 0.166W 25 = 0.6W 100 = 1W 200 = 2W Tolerance 1% = 1 0.5% = 05 0.1% = 01 Taping BD = Tape and reel T = Tape and ammo Value in ohms Operating Temperature: -55°C to 155°C * Parts also available with 26mm width taping - add PT26 to end of part numbeR. High precision tolerance available to special order with extremely low ppm temperature coefficient e.g. 0.1% 15ppm Taping specification available on page 134.
ORDERING INFORMATION
www.du bilier.co .uk
RESISTORS PRECISION METAL FILM DMR CURRENT NOISE POWER DE-RATING 100 70 1550 20 40 180100 120 140 Ambient Temperature /ϒC Percent Rated Load 1.0 0.3 0.1 0.03 0.01 0.003 10k100 1k 100k 1M Nominal Resistance / V/V 1/4W 1/2W *Rated Continuous Working Voltage (RCWV) = √ Power Rating x Resistance Value PERFORMANCE TEST TEST METHOD APPRAISE Short Time Overload JIS-C-5202 5.5 2.5 Times RCWV for 5 seconds ± (0.25%+0.05Ω) Dielectric Withstanding Voltage JIS-C-5202 5.7 in V- Block for 60 seconds by Type Temperature Coefficient of Resistance JIS-C-5202 5.2 -55˚C to 155˚C by Type Insulation Resistance JIS-C-5202 5.6 in V-Block >10000MΩ Solderability JIS-C-5202 6.5 260˚C for ±5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 Trichloroethane for 1 Min. with Ultrasonic No Deterioration of coatings & markings Terminal Strength Direct Load for 10 Sec. in The Direction of Terminal Leads >2.5kg (24.5N) Pulse Overload JIS-C-5202 5.8 4 Times RCWV 10000 Cycles (1 Sec. on, 25 Sec. off) ±(2%+0.05Ω) Load Life in Humidity JIS-C-5202 7.9 40±2˚C, 90~95% RH at RCWV for 1000 hrs. ±(1.5%+0.05Ω) (1.5 Hrs. on, 0.5 Hrs. off) Resistance to Soldering Heat JIS-C-5202 6.4 350˚C ± 10˚C for 3±0.5 seconds ±(0.25%+0.05Ω) SECTION 4 www.du bilier.co .uk