DMR100A SUNLED | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
- LARGE SIZE.
- 4.0 INCH DIGIT HEIGHT.
- LOW CURRENT OPERATION.
- EXCELLENT CHARACTER APPEARANCE.
- HIGH LIGHT OUTPUT.
- EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
- I.C. COMPATIBLE.
- MECHANICALLY RUGGED.
- STANDARD : GRAY FACE, WHITE SEGMENT.
- RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) MR (GaAlAs) Unit Reverse Voltage Per Segment Or (Dp) VR 20 (10) V Forward Current Per Segment Or (Dp) IF 60 (30) mA Forward Current (Peak) Per Segment Or (Dp) 1/10 Duty Cycle 0.1ms Pulse Width iFS 310(155) mA Power Dissipation Per Segment Or (Dp) PT 600(150) mW Operating Temperature TA -40 ~ +85 Storage Temperature Tstg -40 ~ +85 Lead Solder Temperature [2mm Below Package Base] 260°C For 3~5 Seconds MR (GaAlAs) Unit Forward Voltage (Typ.) Per Segment Or (Dp) (IF=10mA) VF 7.2 (3.6) V Forward Voltage (Max.) Per Segment Or (Dp) (IF=10mA) VF 10.0 (5.0) V Reverse Current Per Segment Or (Dp) (Max.) (VR=20(10)V) IR 20 (10) uA Wavelength Of Peak Emission (Typ.) (IF=10mA) λ P 660 nm Wavelength Of Dominant Emission (Typ.) (IF=10mA) λ D 640 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 20 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 45 pF Operating Characteristics (TA=25°C)
www.SunLED.com Published Date : MAR 12,2008 Drawing No : SDSA0764 V5 Checked : Shin Chi P.2/5 Part Number: DMR100A 100mm (4.0") SINGLE DIGIT NUMERIC DISPLAY MR
www.SunLED.com Published Date : MAR 12,2008 Drawing No : SDSA0764 V5 Checked : Shin Chi P.3/5 Part Number: DMR100A 100mm (4.0") SINGLE DIGIT NUMERIC DISPLAY
www.SunLED.com Published Date : MAR 12,2008 Drawing No : SDSA0764 V5 Checked : Shin Chi P.4/5 Part Number: DMR100A 100mm (4.0") SINGLE DIGIT NUMERIC DISPLAY DMR100A Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters.
www.SunLED.com Published Date : MAR 12,2008 Drawing No : SDSA0764 V5 Checked : Shin Chi P.5/5 Part Number: DMR100A 100mm (4.0") SINGLE DIGIT NUMERIC DISPLAY PACKING & LABEL SPECIFICATIONS DMR100A