DMPH4015SPSQ DIODES | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
PowerDI is a registered trademark of Diodes Incorporated. DMPH4015SPSQ Document number: DS38127 Rev. 1 - 2 1 of 7 www.diodes.com June 2016 © Diodes Incorporated NEW PRODUCT DMPH4015SPSQ 175° C P-CHANNEL ENHANCEMENT MODE MOSFET POWERDI Product Summary BVDSS RDS(ON) max ID TC = +25°C -40V 10m @ VGS = -10V -50A 14m @ VGS = -4.5V -40A Description and Applications This MOSFET is designed to meet the stringent requirements of Automotive applications. It is qualified to AEC -Q101, supported by a PPAP and is ideal for use in: Reverse Polarity Protection BLDC Motor Control Power Management Functions Features and Benefits Rated to +175° C – Ideal for High Ambient Temperature Environments 100% Unclamped Inductive Switch (UIS) Test in Production Low On-resistance Fast Switching Speed Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability PPAP Capable (Note 4) Mechanical Data Case: PowerDI5060-8 Case Material: Molded Plastic, ―Green‖ Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminal Connections: See Diagram Terminals: Finish – 100% Matte Tin Annealed over Copper Leadframe. Solderable per MIL-STD-202, Method 208 Weight: 0.097 grams (Approximate) Ordering Information (Note 5) Part Number Case Packaging DMPH4015SPSQ-13 PowerDI5060-8 2,500 / Tape & Reel Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Hal ogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green‖ products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. Marking Information Top View Bottom View Internal Schematic Top View Pin Configuration Pin1 D S G S D S S G D D D Logo Part no. Year: ? 9?= 2009 Xth week: 01 ~ 53 P3010LS YY WW S D S S G D D D Logo Part no. Year: ? 9?= 2009 Xth week: 01 ~ 53 P3010LS YY WW S D S S G D D D Logo Part no. Year: ? 9?= 2009 Xth week: 01 ~ 53 P3010LS YY WW S D S S G D D D Logo Part no. Year: ? 9?= 2009 Xth week: 01 ~ 53 P3010LS YY WW S D S S G D D D Logo Part no. Year: ? 9?= 2009 Xth week: 01 ~ 53 P3010LS YY WW S D S S G D D D Logo Part no. Year: ? 9?= 2009 Xth week: 01 ~ 53 P3010LS YY WW Green S D D G D D S S = Manufacturer’s Marking H4015SS = Product Type Marking Code YYWW = Date Code Marking YY = Year (ex: 16 = 2016) WW = Week (01 to 53) S D S S G D D D H4015SS YY WW
PowerDI is a registered trademark of Diodes Incorporated. DMPH4015SPSQ Document number: DS38127 Rev. 1 - 2 2 of 7 www.diodes.com June 2016 © Diodes Incorporated NEW PRODUCT DMPH4015SPSQ Maximum Ratings (@TA = +25° C, unless otherwise specified.) Characteristic Symbol Value Units Drain-Source Voltage VDSS -40 V Gate-Source Voltage VGSS ±25 V Continuous Drain Current VGS = -10V (Note 8) Steady State TC = +25° C TC = +100°C ID -50 -35 A Continuous Drain Current VGS = -10V (Note 7) Steady State TA = +25° C TA = +100°C ID -12.0 -9.0 A Pulsed Drain Current (10s pulse, duty cycle = 1%) IDM -100 A Maximum Body Diode Continuous Current (Note 8) IS -50 A Avalanche Current (Note 9) L = 1mH IAS -22 A Avalanche Energy (Note 9) L = 1mH EAS 260 mJ Thermal Characteristics (@TA = +25° C, unless otherwise specified.) Characteristic Symbol Value Units Total Power Dissipation (Note 6) TA = +25° C PD 1.5 W Thermal Resistance, Junction to Ambient (Note 6) Steady State RθJA 98 ° C/W Total Power Dissipation (Note 7) TA = +25° C PD 2.6 W Thermal Resistance, Junction to Ambient (Note 7) Steady State RθJA 57.0 ° C/W Thermal Resistance, Junction to Case (Note 8) RθJC 0.9 ° C/W Operating and Storage Temperature Range TJ, TSTG -55 to +175 °C Electrical Characteristics (@TA = +25° C, unless otherwise specified.) Characteristic Symbol Min Typ Max Unit Test Condition OFF CHARACTERISTICS (Note 10) Drain-Source Breakdown Voltage BVDSS -40 V VGS = 0V, ID = -250 A Zero Gate Voltage Drain Current IDSS -1 µA VDS = -40V, VGS = 0V Gate-Source Leakage IGSS ±100 nA VGS = ±25V, VDS = 0V ON CHARACTERISTICS (Note 10) Gate Threshold Voltage VGS(TH) -1.5 -2 -2.5 V VDS = VGS, ID = -250 A Static Drain-Source On-Resistance RDS(ON) 8 10 m VGS = -10V, ID = -9.8A Diode Forward Voltage VSD -0.7 -1 V VGS = 0V, IS = -1A DYNAMIC CHARACTERISTICS (Note 11) Input Capacitance Ciss 4234 pF VDS = -20V, VGS = 0V f = 1MHz Output Capacitance Coss 1036 Reverse Transfer Capacitance Crss 526 Gate Resistance Rg 7.8 VDS = 0V, VGS = 0V, f = 1MHz Total Gate Charge (VGS = -4.5V) Qg 42.7 nC VDS = -20V, ID = -9.8A Total Gate Charge (VGS = -10V) Qg 91 Gate-Source Charge Qgs 14.2 Gate-Drain Charge Qgd 13.5 Turn-On Delay Time tD(ON) 13.2 ns VGS = -10V, VDD = -20V, RG = 6, ID = -1A Turn-On Rise Time tR 10 Turn-Off Delay Time tD(OFF) 303 Turn-Off Fall Time tF 138 Reverse Recovery Time tRR — 26 — ns IF = -9.8A, di/dt = -100A/µs Reverse Recovery Charge QRR — 20 — nC IF = -9.8A, di/dt = -100A/µs Notes: 6. Device mounted on FR-4 PC board, with minimum recommended pad layout, single sided. 7. Device mounted on FR-4 substrate PC board, 2oz copper, with thermal bias to bottom layer 1inch square copper plate. 8. Thermal resistance from junction to soldering point (on the exposed drain pad). 9. IAS and EAS rating are based on low frequency and duty cycles to keep T J = +25°C. 10. Short duration pulse test used to minimize self-heating effect. 11. Guaranteed by design. Not subject to product testing.
PowerDI is a registered trademark of Diodes Incorporated. Figure 13. Transient Thermal Resistance
PowerDI is a registered trademark of Diodes Incorporated. DMPH4015SPSQ Document number: DS38127 Rev. 1 - 2 6 of 7 www.diodes.com June 2016 © Diodes Incorporated NEW PRODUCT DMPH4015SPSQ Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. PowerDI5060-8 Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. PowerDI5060-8 PowerDI5060-8 Dim Min Max Typ A 0.90 1.10 1.00 A1 0.00 0.05 b 0.33 0.51 0.41 b2 0.200 0.350 0.273 b3 0.40 0.80 0.60 c 0.230 0.330 0.277 D 5.15 BSC D1 4.70 5.10 4.90 D2 3.70 4.10 3.90 D3 3.90 4.30 4.10 E 6.15 BSC E1 5.60 6.00 5.80 E2 3.28 3.68 3.48 E3 3.99 4.39 4.19 e 1.27 BSC G 0.51 0.71 0.61 K 0.51 L 0.51 0.71 0.61 L1 0.100 0.200 0.175 M 3.235 4.035 3.635 M1 1.00 1.40 1.21 Θ 10º 12º 11º Θ1 6º 8º 7º All Dimensions in mm Dimensions Value (in mm) C 1.270 G 0.660 G1 0.820 X 0.610 X1 4.100 X2 0.755 X3 4.420 X4 5.610 Y 1.270 Y1 0.600 Y2 1.020 Y3 0.295 Y4 1.825 Y5 3.810 Y6 0.180 Y7 6.610 X3 Y2 X C Y(4x) G A L K M G Detail A 0(4X) c e D E Detail A b (8X) e/2 01 (4X) b2 (4X) b3 (4X)E3
PowerDI is a registered trademark of Diodes Incorporated. DMPH4015SPSQ Document number: DS38127 Rev. 1 - 2 7 of 7 www.diodes.com June 2016 © Diodes Incorporated NEW PRODUCT DMPH4015SPSQ IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other c hanges without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license unde r its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diod es Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising ou t of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product nam es and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this do cument is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided i n the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety -critical, life support devices or systems, notwithstanding any devices - or systems -related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2016, Diodes Incorporated www.diodes.com