DMP58D0LFB
Document overview
- Manufacturer or author: Diodes Incorporated
- PDF pages: 8
Technical content
Features
Low On-Resistance Low Input Capacitance Fast Switching Speed Low Input/Output Leakage ESD Protected 1kV Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) For automotive applications requiring specific change control (i.e.: parts qualified to AEC-Q100/101/104/200, PPAP capable, and manufactured in IATF 16949 certified facilities), please refer to the related automotive grade (Q-suffix) part. A listing can be found at https://www.diodes.com/products/automotive/automotive- products/. This part is qualified to JEDEC standards (as references in AEC-Q) for High Reliability. https://www.diodes.com/quality/product-definitions/ Mechanical Data Package: X1-DFN1006-3 Package Material: Molded Plasti c, "Green" Molding Compound ; UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish — NiPdAu. Solderable per MIL -STD-202, Method 208 Weight: 0.001 grams (Approximate) Ordering Information (Note 4) Part Number Package Packing Qty. Carrier DMP58D0LFB-7 X1-DFN1006-3 3,000 Tape & Reel DMP58D0LFB-7B X1-DFN1006-3 10,000 Tape & Reel Notes: 1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Hal ogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at https://www.diodes.com/design/support/packaging/diodes -packaging/. X1-DFN1006-3 Bottom View Top View Pin-Out Equivalent Circuit D S G Source Gate Protection Diode Gate Drain NOT RECOMMENDED FOR NEW DESIGN USE DMP68D1LFB-7B Green
Document number: DS35206 Rev. 11 - 3 2 of 8 www.diodes.com June 2022 © 2022 Copyright Diodes Incorporated. All Rights Reserved. DMP58D0LFB Marking Information DMP58D0LFB-7 DMP58D0LFB-7B Maximum Ratings (@TA = +25° C, unless otherwise specified.) Characteristic Symbol Value Unit Drain-Source Voltage VDSS -50 V Gate-Source Voltage VGSS ± 20 V Continuous Drain Current (Note 5) VGS = -5V Steady State TA = +25° C TA = +70° C ID -180 -150 mA Continuous Drain Current (Note 6) VGS = -5V Steady State TA = +25° C TA = +70°C ID -310 -250 mA Pulsed Drain Current (Note 7) IDM -500 mA Thermal Characteristics Characteristic Symbol Max Unit Power Dissipation (Note 5) PD 0.47 W Thermal Resistance, Junction to Ambient @TA = +25° C (Note 5) RθJA 258 ° C/W Power Dissipation (Note 6) PD 1.22 W Thermal Resistance, Junction to Ambient @TA = +25°C (Note 6) RθJA 105 ° C/W Operating and Storage Temperature Range TJ, TSTG -55 to +150 ° C Notes: 5. Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. 6. Device mounted on FR-4 substrate PC board, 2oz copper, with thermal vias to bottom layer 1inch square c opper plate. 7. Repetitive rating, pulse width limited by junction temperature. NZ = Product Type Marking Code NZ NZ NZ Top View Bar Denotes Gate and Source Side NZ NZ NZ NZ Top View Bar Denotes Gate and Source Side NZ From date code 1527 (YYWW), this changes to: NZ Top View Dot Denotes Drain Side NZ NZ NZ
Document number: DS35206 Rev. 11 - 3 3 of 8 www.diodes.com June 2022 © 2022 Copyright Diodes Incorporated. All Rights Reserved. DMP58D0LFB Electrical Characteristics (@TA = +25° C, unless otherwise specified.) Characteristic Symbol Min Typ Max Unit Test Condition OFF CHARACTERISTICS (Note 8) Drain-Source Breakdown Voltage BVDSS -50 — — V VGS = 0V, ID = -250μA Zero Gate Voltage Drain Current TJ = +25° C IDSS — — -1.0 µA VDS = -50V, VGS = 0V Gate-Source Leakage IGSS — — ±5 µA VGS = ±20V, VDS = 0V ON CHARACTERISTICS (Note 8) Gate Threshold Voltage VGS(TH) -0.8 — -2.1 V VDS = VGS, ID = -250μA Static Drain-Source On-Resistance RDS(ON) — 6 8 Ω VGS = -5V, ID = -100mA — 12 18 Ω VGS = -2.5V, ID = -10mA Forward Transfer Admittance |Yfs| 0.05 — — S VDS = -25V, ID = -100mA DYNAMIC CHARACTERISTICS (Note 9) Input Capacitance Ciss — 27 — pF VDS = -25V, VGS = 0V, f = 1.0MHz Output Capacitance Coss — 4.0 — Reverse Transfer Capacitance Crss — 1.4 — Turn-On Delay Time tD(ON) — 30.7 — ns VGS = -4.5V, VDS = -30V, RG = 50Ω, ID = -10mA Turn-On Rise Time tR — 84.1 — Turn-Off Delay Time tD(OFF) — 201.8 — Turn-Off Fall Time tF — 32.2 — Notes: 8. Short duration pulse test used to minimize self-heating effect. 9. Guaranteed by design. Not subject to production testing.
© 2022 Copyright Diodes Incorporated. All Rights Reserved. Figure 12. Transient Thermal Resistance
Document number: DS35206 Rev. 11 - 3 7 of 8 www.diodes.com June 2022 © 2022 Copyright Diodes Incorporated. All Rights Reserved. DMP58D0LFB Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. X1-DFN1006-3 Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. X1-DFN1006-3 X1-DFN1006-3 Dim Min Max Typ A 0.47 0.53 0.50 A1 0.00 0.05 0.03 b 0.10 0.20 0.15 b2 0.45 0.55 0.50 D 0.95 1.075 1.00 E 0.55 0.675 0.60 e - - 0.35 L1 0.20 0.30 0.25 L2 0.20 0.30 0.25 L3 - - 0.40 z 0.02 0.08 0.05 All Dimensions in mm Dimensions Value (in mm) C 0.70 G1 0.30 G2 0.20 X 0.40 X1 1.10 Y 0.25 Y1 0.70 L3 L1L2 e b D E A z Seating Plane Pin #1 ID C X Y
Document number: DS35206 Rev. 11 - 3 8 of 8 www.diodes.com June 2022 © 2022 Copyright Diodes Incorporated. All Rights Reserved. DMP58D0LFB IMPORTANT NOTICE 1. DIODES INCORPORATED (Diodes) AND ITS SUBSIDIARIES MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO ANY INFORMATION CONTAINED IN THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON -INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). 2. The Information contained herein is for informational purpose only and is provided only to illustrate the operation of Diodes ’ products described herein and application examples. Diodes does not assume any liability arising out of the application or use of this docu ment or any product described herein. This document is intended for skilled and technically trained engineering customers and users who design with Diodes’ products. Diodes’ products may be used to facilitate safety-related applications; however, in all instances customers and users are responsible for (a) selecting the appropriate Diodes products for their applications, (b) evaluating the suitability of Diodes’ products for their intended applications, (c) ensuring their applications, which incorporate Diodes’ products, comply the applicable legal and regulatory requirements as well as safety and functional-safety related standards, a nd (d) ensuring they design with appropriate safeguards (including testing, validation, quality control techniques, redundancy, malfunction prevention, and appropriate treatment for aging degradation) to minimize the risks associ ated with their applications. 3. Diodes assumes no liability for any application -related information, support, assistance or feedback that may be provided by Diodes from time to time. Any customer or user of this document or products described herein will assume all risks and li abilities associated with such use, and will hold Diodes and all companies whose products are represented herein or on Diodes’ websites, harmless against al l damages and liabilities. 4. Products described herein may be covered by one or more United Stat es, international or foreign patents and pending patent applications. Product names and markings noted herein may also be covered by one or more United States, international or fore ign trademarks and trademark applications. Diodes does not convey any licen se under any of its intellectual property rights or the rights of any third parties (including third parties whose products and services may be described in this document or on Diodes’ website) under this document. 5. Diodes’ products are provided subje ct to Diodes’ Standard Terms and Conditions of Sale (https://www.diodes.com/about/company/terms-and-conditions/terms-and-conditions-of-sales/) or other applicable terms. This document does not alter or expand the applicable warranties provided by Diodes. Diodes does not warrant or accept any liability whatsoever in r espect of any products purchased through unauthorized sales channel. 6. Diodes’ products and technology may not be used for or incorporated into any products or systems whose manufacture, use or sale is prohibited under any applicable laws and regulations. Should customers or users use Diodes’ products in contravention of any applicable laws or regulations, or for any unintended or unauthorized application, customers and users will (a) be solely responsible for any da mages, losses or penalties arising in connection therewith or as a result thereof, and (b) indemnify and hold Diodes and its r epresentatives and agents harmless against any and all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim relating to any noncompliance with the applicable laws and regulations, as well as any unintended or unauthorized application. 7. While efforts have been made to ensure the information contained in this document is accurate, complete and current, it may c ontain technical inaccuracies, omissions and typographical errors. Diodes does not warrant that informatio n contained in this document is error -free and Diodes is under no obligation to update or otherwise correct this information. Notwithstanding the foregoing, Diodes reserves the right to make modifications, enhancements, improvements, corrections or other c hanges without further notice to this document and any product described herein. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes. 8. Any unauthorized copying, modification, distribution, transmission, display or other use of this document (or any portion her eof) is prohibited. Diodes assumes no responsibility for any losses incurred by the customers or users or any third parties arising from any such unauthorized use. 9. This Notice may be periodically updated with the most recent version available at https://www.diodes.com/about/company/terms-and- conditions/important-notice DIODES is a trademark of Diodes Incorporated in the United States and other countries. The Diodes logo is a registered trademark of Diodes Incorporated in the United States and other countries. © 2022 Diodes Incorporated. All Rights Reserved. www.diodes.com