DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
100% Unclamped Inductive Switch (UIS) test in production Low on-resistance Fast switching speed Totally Lead-Free & Fully RoHS compliant (Note 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability Mechanical Data Case: SO-8 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminal Connections: See Diagram Terminals: Finish – Tin Finish annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Weight: 0.074 grams (approximate) Ordering Information (Note 4 & 5) Part Number Compliance Case Packaging DMP4047SSD-13 Standard SO-8 2,500/Tape & Reel DMP4047SSDQ-13 Automotive SO-8 2,500/Tape & Reel Notes: 1. No purposely added lead. Fully EU Directiv e 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more in formation about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_grade_definitions/. Marking Information Top View Top View Pin-Out Equivalent Circuit = Manufacturer’s Marking P4047SD = Product Type Marking Code YYWW = Date Code Marking YY = Year (ex: 09 = 2009) WW = Week (01 - 53) SO-8 1 4 8 5 P4047SD YY WW D1S1
Document Number DS36353 Rev. 3 - 2 2 of 5 www.diodes.com September 2013 © Diodes Incorporated DMP4047SSD NEW PRODUCT NEW PRODUCT Maximum Ratings (@TA = +25°C, unless otherwise specified.) Characteristic Symbol Value Units Drain-Source Voltage VDSS -40 V Gate-Source Voltage VGSS ±20 V Continuous Drain Current (Note 7) VGS = -10V Steady State TA = +25°C TA = +70°C ID -5.1 -4.1 A t < 10s TA = +25°C TA = +70°C ID -6.5 -5.2 A Continuous Drain Current (Note 7) VGS = -4.5V Steady State TA = +25°C TA = +70°C ID -4.6 -3.7 A t < 10s TA = +25°C TA = +70°C ID -5.9 -4.7 A Maximum Body Diode Continuous Current IS -2.5 A Pulsed Drain Current (10µs pulse, duty cycle = 1%) IDM -40 A Thermal Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Symbol Value Units Total Power Dissipation (Note 6) TA = +25°C PD 1.3 W TA = +70°C 0.8 Thermal Resistance, Junction to Ambient (Note 6) Steady state RθJA 98 °C/W t < 10s 59 Total Power Dissipation (Note 7) TA = +25°C PD 1.8 W TA = +70°C 1.1 Thermal Resistance, Junction to Ambient (Note 7) Steady state RθJA 71 °C/W t < 10s 43 Thermal Resistance, Junction to Case (Note 7) RθJC 11.8 Operating and Storage Temperature Range TJ, TSTG -55 to +150 °C Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Symbol Min Typ Max Unit Test Condition OFF CHARACTERISTICS (Note 8) Drain-Source Breakdown Voltage BVDSS -40 V VGS = 0V, ID = -250μA Zero Gate Voltage Drain Current TJ = +25°C I DSS -1 µA VDS = -40V, VGS = 0V Gate-Source Leakage IGSS ±100 nA VGS = ±20V, VDS = 0V ON CHARACTERISTICS (Note 8) Gate Threshold Voltage VGS(th) -1.0 -3.0 V VDS = VGS, ID = -250μA Static Drain-Source On-Resistance RDS (ON) 33 45 mΩ VGS = -10V, ID = -4.4A 40 55 VGS = -4.5V, ID = -3.7A Diode Forward Voltage VSD -0.75 -1.2 V VGS = 0V, IS = -3.9A DYNAMIC CHARACTERISTICS (Note 9) Input Capacitance Ciss 1154 pF VDS = -20V, VGS = 0V, f = 1.0MHz Output Capacitance Coss 84 pF Reverse Transfer Capacitance Crss 66 pF Gate Resistance RG 12.6 Ω VDS = 0V, VGS = 0V, f = 1MHz Total Gate Charge (VGS = -4.5V) Qg 10.6 nC VDS = -20V, ID = -4.9A Total Gate Charge (VGS = -10V) Qg 21.5 nC Gate-Source Charge Qgs 2.2 nC Gate-Drain Charge Qgd 3.3 nC Turn-On Delay Time tD(on) 8.7 ns VDS = -20V, ID = -3.9A VGS = 4.5V, RG = 1Ω Turn-On Rise Time tr 19.6 ns Turn-Off Delay Time tD(off) 34.9 ns Turn-Off Fall Time tf 25.5 ns Body Diode Reverse Recovery Time trr 9.61 ns IF = -3.9A, di/dt = 100A/μs Body Diode Reverse Recovery Charge Qrr 3.3 nC Notes: 6. Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. 7. Device mounted on FR-4 substrate PC board, 2oz copper, with 1inch square copper plate. 8. Short duration pulse test used to minimize self-heating effect. 9. Guaranteed by design. Not subject to product testing.
Document Number DS36353 Rev. 3 - 2 5 of 5 www.diodes.com September 2013 © Diodes Incorporated DMP4047SSD NEW PRODUCT NEW PRODUCT Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. Diodes Incorporated does not assume any liability ari sing out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Inco rporated products for any unintended or una uthorized application, Customers shall i ndemnify and hold Diodes Incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of t his document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical com ponents in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporate d and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2013, Diodes Incorporated www.diodes.com Dimensions Value (in mm) X 0.60 Y 1.55 C1 5.4 C2 1.27 X Y