DMF05LCFLP

Document overview

  • Manufacturer or author: Diodes Incorporated
  • PDF pages: 4

Technical content

Features

  • 5-line ESD Protection
  • Sub-miniature Package (1.6 x 1.6mm)
  • Low Capacitance – 42pF typ @ V R = 0V
  • Provides a High Level of Prot ection from ESD to IEC61000-4-2
  • ±30kV Contact Discharge
  • ±30kV Air Discharge
  • Lead Free/RoHS Compliant (Note 1)
  • "Green" Device (Note 2)
  • Qualified to AEC-Q101 Standards for High Reliability Mechanical Data
  • Case: DFN1616-6
  • Case Material: Molded Plasti c, “Green” Molding Compound. UL Flammability Classification Rating 94V-0
  • Moisture Sensitivity: Level 1 per J-STD-020
  • Terminals: Solderable per MIL-STD-202, Method 208
  • Lead Free Plating (NiPdAu Finish over Copper leadframe).
  • Polarity: Pin 1 Dot and Center Pad Notch, See Diagram
  • Marking Information: See Page 2
  • Ordering Information: See Page 2
  • Weight: 0.004 grams (approximate) Maximum Ratings @TA = 25°C unless otherwise specified Characteristic Symbol Value Unit Peak Pulse Current, 8/20μs waveform, single shot, per IEC61000-4-5 IPPM 5 A Peak Pulse Power, 8/20μs waveform, single shot, per IEC61000-4-5 PPP 70 W ESD Rating Human Body Model ESD 8 kV Machine Model 400 V IEC61000-4-2 Air Discharge 30 kV IEC61000-4-2 Contact Discharge 30 kV Thermal Characteristics Characteristic Symbol Value Unit Thermal Resistance Junction to Ambient Air (Note 3) RθJA 256 °C/W Operating and Storage Temperature Range TJ, TSTG -55 to +150 °C Electrical Characteristics @TA = 25°C unless otherwise specified Reverse Standoff Voltage VRWM @ IRWM = 1μA Breakdown Voltage VBR @ IT Test Current Max. Reverse Leakage @ VRWM (Note 4) Max. Clamping Voltage @ IPP = 1A per IEC61000-4-5 Max. Clamping Voltage Vc @ IPP = 5A per IEC61000-4-5 Max. Forward Clamping Voltage VF @ IF = 1A per IEC61000-4-5 Max. Forward Clamping Voltage VF @ IF = 5A per IEC61000-4-5 Max Total Capacitance VR = 0V f = 1MHz Typical Total Capacitance VR = 2.5V f = 1MHz Min (V) Min (V) Max (V) IT (mA) I R (μA) V C (V) V C (V) VF (V) VF (V) C T (pF) C T (pF) Notes: 1. No Purposefully added Lead. Only one switching diode powered on. 4. Short duration pulse test used to minimize self-heating effect. DFN1616-6 Internal Schematic TOP VIEW BOTTOM VIEW 123 654

Document number: DS32004 Rev. 3 - 2 2 of 4 www.diodes.com July 2010 © Diodes Incorporated DMF05LCFLP NEW PRODUCT t, TIME ( s) Fig. 1 Pulse Waveform μ 20 40 60 100 I , PEAK PULSE CURRENT (%I )Pp pP 0.001 0.01 0.1 100 V , INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics F I , INSTANTANEOUS FORWARD CURRENT (mA)F I , INSTANTANEOUS REVERSE CURRENT (nA)R Fig. 3 Typical Reverse Characteristics V, I NSTANTANEOUS REVERSE VOLTAGE (V)R 100 0123 45 V , REVERSE VOLTAGE (V) Fig. 4 Typical Capacitance vs. Reverse Voltage R C , TOTAL CAPACITANCE (pF)T Ordering Information (Note 5) Part Number Case Packaging DMF05LCFLP-7 DFN1616-6 3000/Tape & Reel Marking Information Date Code Key Year 2010 2011 2012 2013 2014 2015 Code X Y Z A B C Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O N D A10 = Product Type Marking Code YM = Date Code Marking Y = Year (ex: X = 2010) M = Month (ex: 9 = September) A10 YM

Document number: DS32004 Rev. 3 - 2 3 of 4 www.diodes.com July 2010 © Diodes Incorporated DMF05LCFLP NEW PRODUCT Package Outline Dimensions Suggested Pad Layout DFN1616-6 Dim Min Max Typ A 0.545 0.605 0.575 A1 0 0.05 0.02 A3 ⎯ ⎯ 0.13 b 0.20 0.30 0.25 D 1.55 1.675 1.60 D2 1.10 1.30 1.20 E 1.55 1.675 1.60 e ⎯ ⎯ 0.50 E2 0.30 0.50 0.40 L 0.275 0.375 0.325 All Dimensions in mm Dimensions Value (in mm) Z 1.3 G 0.175 X1 0.50 X2 0.525 Y 0.30 C 0.50 D A e b L E G Z CY

Document number: DS32004 Rev. 3 - 2 4 of 4 www.diodes.com July 2010 © Diodes Incorporated DMF05LCFLP NEW PRODUCT IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. Diodes Incorporated does not assume any liability ari sing out of the application or use of this document or an y product described herein; neither does Di odes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or us er of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. Should Customers purchase or use Diodes Inco rporated products for any unintended or una uthorized application, Customers shall i ndemnify and hold Diodes Incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support dev ice or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporate d and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com