DME CDE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02740•Phone: (508)996-8561•Fax: (508)996-3830 www.cde.com Type DME Polyester Film Capacitors (µF) Part Number Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm) V/μs
100 Vdc
NOTE: Refer to Application Guide for test conditions. Contact us for other capacitance values, sizes and performance specifications. DC Applications Miniature Size Voltage Range: 100-1000 Vdc Capacitance Range: .01-10 µF Capacitance Tolerance: ±10% (K) standard ±5% (J) optional Operating Temperature Range: -55 °C to 125 °C* *Full-rated voltage at 85 °C–Derate linearly to 50%-rated voltage at 125 °C Dielectric Strength: 150% (1 minute) Dissipation Factor: 1% Max. (25 °C, 1kHz) Insulation Resistance: 3,000 MΩ x µF 9,000 MΩ Min. Life Test: 1000 Hours at 85°C at 125% Rated Voltage Type DME radial-leaded, mini-dipped capacitors deliver virtually the same performance of other capacitors physically twice as big. Improvements in film technology permit the use of thinner dielectric. Type DME self heals shorts caused by overvoltage transients. For small size and low cost, Type DME is tops. RoHS Compliant
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02740•Phone: (508)996-8561•Fax: (508)996-3830 www.cde.com Type DME Polyester Film Capacitors (µF) Part Number Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm) V/μs
250 Vdc
400 Vdc
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02740•Phone: (508)996-8561•Fax: (508)996-3830 www.cde.com Type DME Polyester Film Capacitors (µF) Part Number Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm) V/μs (µF) Part Number Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm) V/μs
630 Vdc
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02740•Phone: (508)996-8561•Fax: (508)996-3830 www.cde.com Type DME Polyester Film Capacitors (µF) Part Number Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm) V/μs
1000 Vdc
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information con- tained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guaran- tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa- tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi- cated in such warnings, cautions and notes, or that other safety measures may not be required.