DM320003-3

PIC32_V01 MICROCHIP | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 33

Technical content

Indianapolis - 317-773-8323 Los Angeles - 949-462-9523 Phoenix - 480-792-7200 Santa Clara - 408-961-6444 Toronto - 905-673-0699 Europe Austria - Wels - 43-7242-2244-39 Denmark - Copenhagen - 45-4450-2828 France - Paris - 33-1-69-53-63-20 Germany - Munich - 49-89-627-144-0 Italy - Milan - 39-0331-742611 Netherlands - Drunen - 31-416-690399 Spain - Madrid - 34-91-708-08-90 UK - Wokingham - 44-118-921-5869 Asia/Pacific Australia - Sydney - 61-2-9868-6733 China - Beijing - 86-10-8569-2100 China - Chengdu - 86-28-8665-5511 China - Chongqing - 86-23-8980-9588 Asia/Pacific (Continued) China - Hangzhou - 86-571-2819-3187 China - Hong Kong SAR - 852-2943-5100 China - Nanjing- 86-25-8473-2460 China - Qingdao - 86-532-8502-7355 China - Shanghai - 86-21-5407-5533 China - Shenyang - 86-24-2334-2829 China - Shenzhen - 86-755-8864-2200 China - Wuhan - 86-27-5980-5300 China - Xiamen - 86-592-2388138 China - Xian - 86-29-8833-7252 China - Zhuhai - 86-756-3210040 India - Bangalore - 91-80-3090-4444 India - New Delhi - 91-11-4160-8631 India - Pune - 91-20-3019-1500 Japan - Osaka - 81-6-6152-7160 Japan - Tokyo - 81-3-6880-3770 Korea - Daegu - 82-53-744-4301 Korea - Seoul - 82-2-554-7200 Malaysia - Kuala Lumpur - 60-3-6201-9857 Malaysia - Penang - 60-4-227-8870 Philippines - Manila - 63-2-634-9065 Singapore - 65-6334-8870 Taiwan - Hsin Chu - 886-3-5778-366 Taiwan - Kaohsiung - 886-7-213-7828 Taiwan - Taipei - 886-2-2508-8600 Thailand - Bangkok - 66-2-694-1351 08/20/13 Microchip Technology Inc. • 2355 West Chandler Blvd. • Chandler, AZ 85224-6199 www.microchip.com The Microchip name and logo, the Microchip logo, and MPLAB are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks mentioned herein are property of their respective DS50002090B *DS50002090B* PIC32 USB Starter Kit III Information Sheet The PIC32 USB Starter Kit III (DM320003-3) provides a low-cost method for the development and testing of USB Host and Device applications with PIC32MX430/ 450/470 devices. This evaluation kit includes the PIC32 USB Starter Kit III board, standard A to mini-B USB cable for the debugger, standard A to micro-B cable for the USB application development, three user-programmable LEDs, and three push button switches. Installing MPLAB® IDE and C Compilers The MPLAB Integrated Development Environment (IDE) should be installed prior to using the PIC32 USB Starter Kit III. While MPLAB IDE provides the assembler tools for development, the Microchip demonstrat ion code requires installation of a C compiler. Microchip’s MPLAB C Compiler seamlessly integrates into MPLAB IDE. Both the MPLAB IDE and MPLAB C Compiler are free (see the following note) and are available for download at www.microchip.com/MPLAB and www.microchip.com/ compilers, respectively. Microchip Demonstration Code and More Information For the free Microchip demonstration code and more information, please visit the PIC32 USB Starter Kit III page at: www.microchip.com. From the Design menu, click Development Tools. Then, from the Starter Kits menu, click Starter Kits, and then click PIC32 USB Starter Kit III . From the downloads section, select the desired device application. Running the PIC32 USB Starter Kit III Demonstration Code After downloading and installing the Microchip development tools, please refer to the README.txt file in the demonstration folder for instructions on running the code. Note: Standard Evaluation (Free) – All optim ization levels are enabled for 60 days, but then revert to optimization level 1 only.

 2013 Microchip Technology Inc. DS70005132B PIC32 USB Starter Kit III User’s Guide

DS70005132B-page 2  2013 Microchip Technology Inc. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application me ets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY , PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE . Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting fr om such use. No licenses are conveyed, implicitly or ot herwise, under any Microchip intellectual property rights. Note the following details of the code protection feature on Microchip devices:

• Microchip products meet the specification cont ained in their particular Microchip Data Sheet.
• Microchip believes that its family of products is one of the mo st secure families of its kind on the market today, when used in the intended manner and under normal conditions.
• There are dishonest and possibly illegal me thods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
• Microchip is willing to work with the customer who is concerned about the integrity of their code.
• Neither Microchip nor any other semico nductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC ® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified. QUALITY MANAGEMENT SYSTEM CERTIFIED BY DNV == ISO/TS 16949 == Trademarks The Microchip name and logo, the Microchip logo, dsPIC, FlashFlex, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, PIC32 logo, rfPIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MTP , SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries. Analog-for-the-Digital Age, Application Maestro, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE, rfLAB, Select Mode, SQI, Serial Quad I/O, Total Endurance, TSHARC, UniWinDriver, WiperLock, ZENA and Z-Scale are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. GestIC and ULPP are registered trademarks of Microchip Technology Germany II GmbH & Co. & KG, a subsidiary of Microchip Technology Inc., in other countries. All other trademarks mentioned herein are property of their respective companies. © 2013, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. ISBN: 978-1-62077-562-2

 2013 Microchip Technology Inc. DS70005132A-page 3 Object of Declaration: PIC32 USB Starter Kit III

PIC32 USB Starter Kit III User’s Guide DS70005132A-page 4  2013 Microchip Technology Inc. NOTES:

USER’S GUIDE  2013 Microchip Technology Inc. DS70005132B-page 5 Table of Contents Chapter 1. Introduction Chapter 2. Hardware Appendix A. Board Layout and Schematics Appendix B. Bill of Materials

PIC32 USB Starter Kit III User’s Guide DS70005132B-page 6  2013 Microchip Technology Inc. NOTES:

USER’S GUIDE  2013 Microchip Technology Inc. DS70005132B-page 7 Preface INTRODUCTION This chapter contains general information that will be useful to know before using the starter kit. Items discussed in this chapter include:

• Document Layout
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Web Site
• Development Systems Customer Change Notification Service
• Customer Support
• Document Revision History DOCUMENT LAYOUT This document describes how to use the PIC32 USB Starter Kit III (i.e., starter kit) as a development tool to emulate and debug firmware on a target board. This user’s guide includes the following chapters:
• Chapter 1. “Introduction” provides a brief overview of the starter kit, highlighting its features and uses.
• Chapter 2. “Hardware” provides the hardware descriptions of the starter kit.
• Appendix A. “Board Layout and Schematics” provides a block diagram, board layouts, and detailed schematics of the starter kit.
• Appendix B. “Bill of Materials” provides the bill of material descriptions and the reference, manufacturer, and part numbers for the components used in the starter kit hardware. NOTICE TO CUSTOMERS All documentation becomes dated, and this manual is no exception. Microchip tools and documentation are constantly evolving to meet customer needs, so some actual dialogs and/or tool descriptions may differ from those in this document. Please refer to our web site (www.microchip.com) to obtain the latest documentation available. Documents are identified with a “DS” number. This number is located on the bottom of each page, in front of the page number. The numbering convention for the DS number is “DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level of the document. For the most up-to-date information on development tools, see the MPLAB ® IDE online help. Select the Help menu, and then Topics to open a list of available online help files.

PIC32 USB Starter Kit III User’s Guide DS70005132B-page 8  2013 Microchip Technology Inc. CONVENTIONS USED IN THIS GUIDE This manual uses the following documentation conventions: DOCUMENTATION CONVENTIONS Description Represents Examples Italic characters Referenced books MPLAB IDE User’s Guide Initial caps A window the Output window A dialog the Settings dialog A menu selection select Enable Programmer Quotes A field name in a window or dialog “Save project before build” Underlined, italic text with right angle bracket A menu path File > Save Bold characters A dialog button Click OK A tab Click the Power tab Text in angle brackets < > A key on the keyboard Press <Enter>, <F1> Plain Courier New Sample source code #define START Filenames autoexec.bat File paths c:\\mcc18\\h Keywords _asm, _endasm, static Command-line options -Opa+, -Opa- Bit values 0, 1 Constants 0xFF, ‘A’ Italic Courier New A variable argument file.o, where file can be any valid filename Square brackets [ ] Optional arguments mcc18 [options] file [options] Curly brackets and pipe character: { | } Choice of mutually exclusive arguments; an OR selection errorlevel {0|1} Represents code supplied by user void main (void) { ... Notes A Note presents information that we want to re-emphasize, either to help you avoid a common pitfall or to make you aware of operating differences between some device family members. A Note can be in a box, or when used in a table or figure, it is located at the bottom of the table or figure. Note 1: This is a note used in a table. Note: This is a standard note box. CAUTION This is a caution note.

 2013 Microchip Technology Inc. DS70005132B-page 9 RECOMMENDED READING This user’s guide describes how to use the starter kit. The following Microchip documents are available and recommended as supplemental reference resources. PIC32MX330/350/370/430/450/470 Family Data Sheet (DS60001185) Consult this document for detailed information on PIC32 devices. Reference information found in this data sheet includes:

• Device memory maps
• Device pinout and packaging details
• Device electrical specifications
• List of peripherals included on the devices MPLAB® XC32 C/C++ Compiler User’s Guide (DS50001686) This document details the use of Microchip’s MPLAB XC32 C/C++ Compiler to develop an application. MPLAB® X IDE User’s Guide (DS50002027) Refer to this document for more information pertaining to the installation and implementation of the MPLAB X IDE software, as well as the MPLAB SIM Simulator software that is included with it. Universal Serial Bus Specification and Associated Documents The Universal Serial Bus is defined by the USB 2.0 specification and its associated supplements and class-specific documents. These documents are available from the USB Implementers Forum. See their web site at: http://www.usb.org THE MICROCHIP WEB SITE Microchip provides online support via our web site at: http://www.microchip.com. This web site makes files and information easily available to customers. Accessible by most Internet browsers, the web site contains the following information:
• Product Support – Data sheets and errata, application notes and sample programs, design resources, user’s guides and hardware support documents, latest software releases and archived software
• General Technical Support – Frequently Asked Questions (FAQs), technical support requests, online discussion groups, Microchip consultant program member listings
• Business of Microchip – Product selector and ordering guides, latest Microchip press releases, listings of seminars and events; and listings of Microchip sales offices, distributors and factory representatives

PIC32 USB Starter Kit III User’s Guide DS70005132B-page 10  2013 Microchip Technology Inc. DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE Microchip’s customer notification service helps keep customers current on Microchip products. Subscribers will receive e-mail notification whenever there are changes, updates, revisions or errata related to a specified product family or development tool of interest. To register, access the Microchip web site at www.microchip.com, click on Customer Change Notification and follow the registration instructions. The Development Systems product group categories are:

• Compilers – The latest information on Microchip C compilers and other language tools
• Emulators – The latest information on the Microchip in-circuit emulator, MPLAB REAL ICE™
• In-Circuit Debuggers – The latest information on the Microchip in-circuit debugger, MPLAB ICD 3
• MPLAB X IDE – The latest information on Microchip MPLAB X IDE, the Windows ® Integrated Development Environment for development systems tools
• Programmers – The latest information on Microchip programmers including the PICkit™ 3 development programmer CUSTOMER SUPPORT Users of Microchip products can receive assistance through several channels:
• Distributor or Representative
• Local Sales Office
• Field Application Engineer (FAE)
• Technical Support Customers should contact their distributor, representative or field application engineer (FAE) for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document. Technical support is available through the web site at: http://support.microchip.com

 2013 Microchip Technology Inc. DS70005132B-page 11 DOCUMENT REVISION HISTORY Revision A (June 2013) This is the initial release of the PIC32 USB Starter Kit III User’s Guide. Revision B (October 2013) The PIC32 device was updated to the PIC32MX470F512L. All updates in this revision reflect this change throughout the document.

PIC32 USB Starter Kit III User’s Guide DS70005132B-page 12  2013 Microchip Technology Inc. NOTES:

USER’S GUIDE  2013 Microchip Technology Inc. DS70005132B-page 13 Chapter 1. Introduction Thank you for purchasing the Microchip Technology Inc. PIC32 USB Starter Kit III. This board provides a low-cost, modular development system for Microchip’s line of 32-bit microcontrollers. The starter kit is preloaded with demonstration software for the user to explore the new features of the PIC32. It is also expandable through a modular expansion interface, which allows the user to extend its functionality. The starter kit also supplies on-board circuitry for full debug and programming capabilities. This chapter covers the following topics:

• Kit Contents
• PIC32 Functionality and Features The preprogrammed example code on the PIC32 MCU is available for download from the Microchip web site at http://www.microchip.com. All project files have been included so that the code may be used directly to restore the PIC32 MCU on the starter kit to its original state (i.e., if the sample device has been reprogrammed with another program).

1.1 KIT CONTENTS

The PIC32 USB Starter Kit III contains the following items:

• PIC32 USB Starter Kit III Development Board
• USB mini-B to full-sized A cable – USB debug cable to debug and power the board
• USB micro-B to full-sized A cable – PIC32 USB cable to communicate with the PIC32 USB port Note: If you are missing any part of a kit, contact a Microchip sales office for assistance. A list of Microchip offices for sales and service is provided at the end of this document.

PIC32 USB Starter Kit III User’s Guide DS70005132B-page 14  2013 Microchip Technology Inc.

1.2 PIC32 FUNCTIONALITY AND FEATURES

Representations of the layout of the PIC32 USB Starter Kit III are shown in Figure 1-1 and Figure 1-2. The top assembly of the board includes these key features, as indicated in Figure 1-1: 1. PIC32MX470F512L 32-bit microcontroller (U1). 2. Green power indicator LED (D7). 3. On-board crystal (Y1) for precision microcontroller clocking (8 MHz). 4. USB Type mini-B receptacle for on-board debugger communications (J3). 5. Green PICkit™ On-board (PKOB) debug indicator LED (D6). 6. Three push button switches, SW1, SW2, and SW3, for user-defined inputs (S1, S2, S3). 7. Three user-defined indicator LEDs, LED1, LED2, and LED3 (D3, D4, D5). 8. USB Type A receptacle for PIC32 host-based applications (J5). 9. HOST mode powe r jumper (JP1). 10. Regulated +3.3V power supply for powering the starter kit via USB or expansion board (U3). FIGURE 1-1: PIC32 USB STARTER KIT III LAYOUT (TOP VIEW) Note: When running USB device applications, open the jumper JP1 to prevent possibly back-feeding voltage onto the V BUS from one port on the host to another (or from one host to another). 910

PIC32 USB Starter Kit III User’s Guide DS70005132B-page 16  2013 Microchip Technology Inc. NOTES:

USER’S GUIDE  2013 Microchip Technology Inc. DS70005132B-page 17 Chapter 2. Hardware This chapter describes the hardware features of the starter kit.

2.1 HARDWARE FEATURES

The key features of the PIC32 USB Starter Kit III are listed below. They are presented in the same order as described in Section 1.2 “PIC32 Functionality and Features”. You can refer to Figure 1-1 for their locations on the board.

2.1.1 Processor Support

The PIC32 USB Starter Kit III is designed with a permanently mounted (i.e., soldered) PIC32MX470F512L processor.

2.1.2 Power Supply

There are two ways to supply power to the PIC32 USB Starter Kit III:

• USB bus power connected to the USB debug connector, J3
• An external application board with a regulated DC power supply that provides +5V can be connected to the J1 application board connector that is provided on the bottom side of the board One green LED, PWR (D7), is provided to indicate the PIC32 microcontroller is powered.

2.1.3 Debug USB Connectivity

The PIC32 USB Starter Kit III includes a PIC24FJ256GB106 that provides debugger connectivity over USB PKOB. The PIC24FJ256GB106 is hard-wired to the PIC32 device to provide protocol translation through the I/O pins of the PIC24FJ256GB106 to the ICSP™ pins of the PIC32 device. The PIC32 USB Starter Kit III currently uses the ICSP pins of the PIC32 device for programming and debugging.

2.1.4 PIC32 USB Connectivity

The following are three possible ways to connect to the PIC32MX470F512L:

• HOST mode – Connect the device to the Type A connector J5, which is located on the top side of the starter kit. If using the Debug USB port to power the Host port, install jumper JP1 to short the back-power prevention diode. Note that a maximum of ~400 mA can be supplied from the Debug USB port to the Host port using this method. If full 500 mA supply is needed, an external supply must be connected to the application board, and the jumper JP1 must be removed to prevent back- powering the Debug USB port.

PIC32 USB Starter Kit III User’s Guide DS70005132B-page 18  2013 Microchip Technology Inc.

• DEVICE mode – Connect the debug Mini-B USB cable to port J3 and this cable will be plugged into the Host USB port to provide power and for debugging, if nec- essary. Then connect the starter kit to the Host using a cable with a Type-B Micro connector to the starter kit’s Micro A/B port J4, located on the bottom side of the starter kit. Connect the other end of this cable to the Host for the DEVICE mode communication. Jumper JP1 should be removed.
• OTG mode – Connect the starter kit to the OTG device using an OTG Micro A/B cable to the Micro A/B port J4, located on the bottom side of the starter kit. The starter kit provides an on-board power supply capable of providing 120 mA (maxi- mum). This supply is controlled by the PIC32MX470F512L microcontroller. Jumper JP1 should be removed.

2.1.5 Switches

Three push button switches provide the following functionality:

• SW1: Active-low switch connected to RD6
• SW2: Active-low switch connected to RD7
• SW3: Active-low switch connected to RD13 These switches do not have any debounce circuitry and require the use of internal pull-up resistors, which allows the investigation of software debounce techniques. When idle, the switches are pulled high (+3.3V), and when pressed, they are grounded.

2.1.6 LEDs

The three LEDs, LED1, LED2, and LED3, are connected to RD0, RD1, and RD2 of PORTD of the processor. The PORTD pins are set high to illuminate the LEDs.

2.1.7 Oscillator Options

The installed microcontroller has an oscillator circuit connected to it. The main oscillator uses an 8 MHz crystal (Y1) and functions as the controller’s Primary Oscillator. Use of an external crystal is required to develop USB applications. The USB specification dictates a frequency tolerance of +/- 0.25% for full speed. Non-USB applications can use the internal oscillators. The starter kit also has provisions for an external Secondary Oscillator (Y2); however, this is not populated. The PIC24FJ256GB106 is independently clocked and has its own 12 MHz crystal (Y3). 2.1.8 120-Pin Modular Expansion Connector The PIC32 USB Starter Kit III is designed with a 120-pin modular expansion interface, which allows the board to provide basic generic functionality now, and easy extendability to new technologies as they become available. TABLE 2-1: STARTER KIT CONNECTOR PART NUMBERS Connector HIROSE Electric PN Starter Kit Connector FX10A-120P/12-SV1(71)

USER’S GUIDE  2013 Microchip Technology Inc. DS70005132B-page 19 Appendix A. Board Layout and Schematics A.1 PIC32 USB STARTER KIT III DE VELOPMENT BOARD BLOCK DIAGRAM FIGURE A-1: HIGH-LEVEL BLO CK DIAGRAM OF THE PIC32 USB STARTER KIT III BOARD PIC32MX470F512L (PIC24FJ256GB106) ICSP™ VUSB(1) or +5V_EXT Debug USB Application Board Connector Switches LEDs +5V EXT VUSB or +5V_EXT +3.3V USB Host Device/OTG (Type micro-A/B) Host (Type A) Note 1: From Debugger USB Port. +3.3V Power Supply Power Circuit Debugger Circuit USB OTG

PIC32 USB Starter Kit III User’s Guide DS70005132B-page 20  2013 Microchip Technology Inc. A.2 PIC32 USB STARTER KIT III BOARD LAYOUT FIGURE A-2: PIC32 USB STARTER KIT III LAYOUT (TOP ASSEMBLY)

 2013 Microchip Technology Inc. DS70005132B-page 21 FIGURE A-3: PIC32 USB STARTER KIT III LAYOUT (BOTTOM ASSEMBLY)

PIC32 USB Starter Kit III User’s Guide DS70005132B-page 22  2013 Microchip Technology Inc. A.3 PIC32 USB STARTER KI T III BOARD SCHEMATICS FIGURE A-4: PIC32 USB STARTER KIT III SCHEMATICS (PIC32MX CPU) PMD4/RE4 PMD3/RE3 PMD2/RE2 TRD0/RG13 TRD1/RG12 TRD2/RG14 PMD1/RE1 PMD0/RE0 TRD3/RA7 TRCLK/RA6 PMD9/RG1 PMP10/RF1 PMD11/RF0 PMD15/RD7 PMD14/RD6 PMRD/RD5 PMD13/RD13 PMD12/RD12 RD3 RD2 RD1 PMD8/RG0 PMWR/RD4 PMA7/VREF-/RA9 PMA6/VREF+/RA10 C1OUT/RB8 C2OUT/RB9 PMA13/CVREF/AN10 PMA12/RB11 TCK/RA1 U2RTS/BCLK2/RF13 U2CTS/RF12 PMA11/AN12/RB12 PMA10/AN13/RB13 PMA1/AN14/RB14 PMA0/AN15/OCFB RD14 RD15 PMA9/RF4 PMA8/RF5 SOSC0/T1CK/RC14 SOSC1/RC13 INT0/RD0 PMCS1/RD11 PMCS2/SCKI/RD10 RD9 RTCC/RD8 SDA1/RA15 SCL1/RA14 TDO/RA5 TDI/RA4 SDA2/RA3 SCL2/RA2 RF8 RF2 RF3 PMD5/RE5 PMD6/RE6 PMD7/RE7 RC1 RC2 RC3 RC4 PMA5/SCK2/RG6 PMA4/RG7 PMA3/RG8 PMA2/RG9 TMS/RA0 RE8 RE9 C1IN+/AN5/RB5 C1IN-/AN4/RB4 C2IN+/AN3/RB3 C2IN-/AN2/CN4/RB2 PGC1/AN1/RB1 PGD1/AN0/RB0 0.1uF 0.1uF 0.1uF 0.1uF 27 99 30 96 33 93 36 90 39 87 100 PIC32MX470F512L_TQFP100 P32_VDD 0.1uF PGC2 PGD2

8 MHz

P32_VDD P32_VDD P32_VDD P32_VDD P32_VDD 11pF C12 11pF C11 20pF C10 20pF 0.1uF P32_VDD 4.7K 0.1uF 10F ICSP_MCLR_VPP_TARGET P32_VDD DNP VBUS RG15 P32_VDD

 2013 Microchip Technology Inc. DS70005132B-page 23 FIGURE A-5: PIC32 USB STARTER KIT III SCHEMATICS (DEBUG CPU) +3.3V_PKOB +3.3V_PKOB +3.3V_PKOB +3.3V_PKOB +3.3V_PKOB +3.3V_PKOB +3.3V_PKOB +3.3V_PKOB ASSEMBLY_ID_0 ASSEMBLY_ID_1 ICSP_MCLR_VPP_PICKIT3 POWER_GOOD_PICKIT3 SCK SDI SDO UTIL_CS UTIL_WP USB_D- USB_D+ UTIL_SCK UTIL_SDI UTIL_SDO VBUS_DEVICE VDD_SENSE VPP_GND VPP_ON VPP_SENSE VREF_2.5V GND GND GND GND GND GND GND GND GND PGC__PKOB PGD_PKOB 10K R13 10K R15 330R R10 0.1uF C19 0.1uF C21 C22 8pF C23 8pF 10F C24 200K R18 100R R14 1uF C20 R12 3.16K R11 13 2Y3 12.0MHz AN6/RB617PMPD4/RE464 AVSS20PMPD1/RE161 PMA13/AN10/RB1023RF058 VDD 26RD755 PMA1/AN14/RB1429PMWR/RD452 PMA8/SCL2/RF532VCPCON/RD149 AN0/RB016 AN3/RB313 VDD10 MCLR7 PMA5/RG64 PMD5/RE51 USBID/RF3 33 D-/RG3 36 OSC1/CLKIN/RC12 39 RTCC/RD8 42 PMCS1/RD11 45 SOSCO/RC14 48 AN2/RB214 AN1/RB115 PMA2/RG98 VSS9 AN5/RB511 PMD6/SCL3/RE62 PMD7/SDA3/RE73 PMA4/RG75 AN7/RB718 AVDD19 AN8/RB821 PMPD3/RE363 PMPD2/RE262 PMPD0/RE060 PMA12/AN11/RB1124 VSS 25 PMA11/AN12/RB1227 ENVREG57 Vcap/VDDCORE56 RD654 PMA0/AN15/RB1530 PMA9/SDA2/RF431 PMBE/RD351 DHP/RD250 Vusb 35 Vbus 34 VSS 41 OSC2/CLKO/RC15 40 VDD 38 SOSCI/RC13 47 INT0/RD0 46 SCL1/PMCS2/RD10 44 USBOENAN4/RB412 PMA3/RG86 D+/RG2 37 SDA1/RD9 43 PMA7/AN9/RB922RF159 PMA10/AN13/RB1328PMRD/RD553 ANAA6/RB6PMPD4/RE4 AVSSPMPD1/RE1 PMA13/ANA10/RB10RF0 VDDRD7 PMA1/ANAA14/RB14PMWR/RRRD4 PMA8/SCL2/RF5VCPCON/RD1 AN0/RB0 AN3/RB3 VDD MCLR PMA5/RG6 PMD5/RE5 USBID/RF3 D-/RG3 OSC1/CLKIN/RC12II RTCC/RD8 PMCS1/RD11 SOSCO/RC14VV AN2/RB2 AN1/RB1 PMA2/RG9 VSS AN5/RB5 PMD6/SCL3/RE6 PMD7/SDA3/RE7 PMA4/RG7 ANAA7/RB7 AVDD ANAA8/RB8 PMPD3/RE3 PMPD2/RE2 PMPD0/RE0 PMA12/ANA11/RB11 VSS PMA11/ANAA12/RB12 ENVREG Vcapa/VDDCORE RD6 PMA0/ANAA15/RB15 PMA9/SDA2/RF4 PMBE/RD3 DHP/RD2 Vusb Vbus VSS OSC2/CLKO/RC15 VDD SOSCI/RC13 INT0/RD0II SCL1/PMCS2/RD10 USBOEN/AN4/RB4 PMA3/RG8 D+/RG2 SDA1/RD9 PMA7/ANA9/RB9RF1 PMA10/ANAA13/RB13PMRD/RD5 PIC24FJ256GB106 10K R16 VBUS_DEVICE_SWITCHED_SENSE TARGET_POWER_ENABLE

PIC32 USB Starter Kit III User’s Guide DS70005132B-page 24  2013 Microchip Technology Inc. FIGURE A-6: PIC32 USB STARTER KIT III SCHEMATICS (APPLICATION BOARD CONNECTOR) GND77 GND11 127 119 113 107 101 GND99 GND121 P3333 GND55 129 131 117 115 125 123 111 105 103 109 128 120 114 108 102 100 122 130 132 118 116 126 124 112 106 104 110 CONN_CL570-0103 RG15 +5V_EXT +5V_EXT +5V_EXT P32_VDD P32_VDD P32_VDD PMP DATA [7:0] PMP CONTROL (5) TIMERS COMPARATOR 2 (3) EXT_INT SPI1 PMP ADDRESS COMPARATOR 1 SP12 UART2 A/D REF JTAG/GPIO ICSP COMPARARTOR REF UART1 I2C1 IC2C2 (5CH) A/D (5) OC/PWM SECONDARY OSC PMP DATA [15:8] TRACE/GPIOTRD1/RG12 TRD2/RG14 PMD5/RE5 PMD6/RE6 PMD7/RE7 PMD4/RE4 PMD3/RE3 PMD2/RE2 PMD1/RE1 PMD0/RE0 PMCS1/RD11 PMCS2/SCKI/RD10 SOSC0/T1CK/RC14 RC1 RC2 RC3 RC4 PMA5/SCK2/RG6 PMA4/RG7 PMA3/RG8 PMA2/RG9 C1IN+/AN5/RB5 C1IN-/AN4/RB4 C2IN+/AN3/RB3 C2IN-/AN2/CN4/RB2 C1OUT/RB8 C2OUT/RB9 SDA1/RA15 SCL1/RA14 RE8 RE9 INT0/RD0 PMCS2/SCKI/RD10 RC4 INT0/RD0 C2IN-/AN2/CN4/RB2 PMA13/CVREF/AN10 PMA12/RB11 PMA11/AN12/RB12 PMA10/AN13/RB13 PMA9/RF4 PMA8/RF5 PMA7/VREF-/RA9 PMA6/VREF+/RA10 PMA5/SCK2/RG6 PMA4/RG7 PMA3/RG8 PMA2/RG9 PMA1/AN14/RB14 PMA0/AN15/OCFB PGD2 PGC2 ICSP_MCLR_VPP_TARGET TMS/RA0 TCK/RA1 TDO/RA5 TDI/RA4 PMA7/VREF-/RA9 PMA6/VREF+/RA10 PMA9/RF4 PMA8/RF5 U2RTS/BCLK2/RF13 U2CTS/RF12 RD14 RD15 RF8 RF2 SDA1/RA15 SCL1/RA14 SDA2/RA3 SCL2/RA2 PGC1/AN1/RB1 PGD1/AN0/RB0 C1IN+/AN5/RB5 C1IN-/AN4/RB4 C2IN+/AN3/RB3 C2IN-/AN2/CN4/RB2 RD9 RTCC/RD8 PMCS1/RD11 PMCS2/SCKI/RD10 PMD12/RD12 INT0/RD0 RD3 RD2 RD1 PMWR/RD4 PMD15/RD7 PMD14/RD6 PMD13/RD13 PMD12/RD12 PMD9/RG1 PMP10/RF1 PMD11/RF0 PMD8/RG0 TRD0/RG13 TRD3/RA7 TRCLK/RA6 SOSC0/T1CK/RC14 SOSC1/RC13 PMA13/CVREF/AN10 PMWR/RD4 PMA0/AN15/OCFB PMRD/RD5

 2013 Microchip Technology Inc. DS70005132B-page 25 FIGURE A-7: PIC32 USB STARTER KIT III SCHEMATICS (POWER SUPPLY) FIGURE A-8: PIC32 USB STARTER KIT III SC HEMATICS (USB OTG/DEVICE POWER SUPPLY) GRN P32_VDD+3.3V_PKOB 330R R46 C14 4.7uF FLAGB 4 OUT 5 GND2 ON3 IN1 FPF2104 TARGET_POWER_ENABLE 100K R43 100K R44 0R R17 VBUS_DEVICE_SWITCHED_SENSE C1IN+/AN5/RB5 R40 4.7K 1uF C31 R41 DNP 100K R42 PGOOD 1 Vout 2 Vin 3 GND 4C-5 C+6 SHDN7 SELECT8 MCP1253_MSOP RD14 VBUS P32_VDD P32_VDD SHIELD6 D-2 D+3 VBUS1 RF3 TYPE MICRO A/B USB OTG/Device Power Supply (120 mA MAX) DEVICE/OTG PORT 10F C32 10F C33

PIC32 USB Starter Kit III User’s Guide DS70005132B-page 26  2013 Microchip Technology Inc. FIGURE A-9: PIC32 USB STARTER KIT III SCHEMATICS (USB HOST POWER SUPPLY) FIGURE A-10: PIC32 USB STARTER KIT III SCHEMATICS (SWITCHES AND LEDS) D-2 D+3 VBUS1 D-C13 100uF RD14C1IN+/AN5/RB5 JP1 +5V_EXT EN4 IN5 GND 2 OC 3 OUT 1 TPS20X1B * Install Jumper if powering from Debugger Power Supply USB HOST Power Supply HOST TYPE - TYPE A +5V_DUSB 330R 330R 330R GreenD5 LED2 RedD3 LED1 YellowD4 LED3 RD1 RD2 USER LEDs GND USER SWITCHES INT0/RD0 PMD14/RD6 PMD15/RD7 PMD13/RD13

USER’S GUIDE  2013 Microchip Technology Inc. DS70005132B-page 27 Appendix B. Bill of Materials B.1 PIC32 USB STARTER KIT III BILL OF MATERIALS TABLE B-1: PIC32 USB STARTER KIT III BILL OF MATERIALS Reference Description Ma nufacturer Part No. C1, C2, C3, C4, C5, C6, C7, C16, C19, C21, C25, C26, C27, C28, C29 CAP CER .10 µF 50V X7R 0603 TDK Corporation C1608X7R1H104M C9, C10 CAP CER 20 PF 50V 5% NP0 0603 TDK Corporation C1608C0G1H200J C15, C17 CAP CER 2.2 µF 16V X5R 0603 TDK Corporation C1608X5R1C225K C18 CAP CER 10000 pF 50V X7R 0603 TDK Corporation C1608X7R1H103M C20, C30, C31 CAP CER 1.0 µF 16V X5 R 10% 0603 TDK Corporation C1608X5R1C105K C22, C23 CAP CER 8 pF 50V NP0 0603 Murata Electronics North America GRM1885C1H8R0DZ01D C8, C24, C32, C33 CAP CER 10 µF 16V Y5V 0805 Murata Electronics North America GRM21BF51C106ZE15L C14 CAP CER 4.7 µF 10V Y5V 0603 Taiyo Yuden JMK107BJ475KA-T C13 CAP CER 100 µF 6.3V Y5V 1206 Murata Electronics North America GRM31CF50J107ZE01L R1, R24, R25, R40 RES 4.7 K 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT4K70 R2, R3, R4, R9, R10, R21, R22, R23, R46 RES 330  1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT330R R5, R13, R15, R16, R19, R31, R32, R33, R34 RES 10 K 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT10K0 R6, R26, R27, R36 RES 0.0  1/10W 0603 SMD Panasonic - ECG ERJ-3GEY0R00V R7, R18 RES 200 K  1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT200K R11 RES 1 K  1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT1K00 R12 RES 3.16 K  1/10W 1% 0603 SMD Yageo RC0603FR-073K16L R14 RES 100  1/10W 5% 0603 SMD Yageo RC0603JR-07100RL R20, R29, R30 RES 2.21 K  1/10W 1% 0603 SMD Panasonic - ECG ERJ-3EKF2211V R28 RES 3.92 K  1/10W 1% 0603 SMD Yageo RC0603FR-073K92L R35, R42, R43, R44 RES 100 K 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT100K R37 RES 100  1/4W 1% 1206 SMD Yageo RC1206FR-07100RL D1, D2 DIODE SCHOTTKY 20V 0.5A SOD123 ON Semiconductor MBR0520LT1G

PIC32 USB Starter Kit III User’s Guide DS70005132B-page 28  2013 Microchip Technology Inc. D3 LED, SMD, RED, 0603 package Kingbright Corp. APT1608EC D4 LED, SMD, YEL, 0603 package Kingbright Corp. APT1608YC D5, D6, D7 LED, SMD, GRN, 0603 package Kingbright Corp. APT1608SGC J1 CONN_CL570-0103 Hirose Electric Co. Ltd. FX10B-120P/12-SV1(71) J3 CONN RECEPT MINI USB 2.0 5 POS Hirose Electric Co. Ltd. UX60-MB-5ST J4 CONN RCPT MICRO USB AB SMD R/A Hirose Electric Co. Ltd. ZX62-AB-5PA(11) J5 CONN USB TYPE A R/A BLACK On Sh ore Technology Inc. USB-A1HSB6 JP1 CONN HEADER .100 SING L STR 2 POS Sullins PBC02SAAN Q1 TRANS SS PNP 40V 300 MW SOT23 Micro Commercial Co. MMBT3906-TP Q2, Q3 TRANSISTOR NPN GP 40V SOT23 Micro Commercial Co. MMBT3904-TP S1, S2, S3 SWITCH TACTILE SPST-N O 0.05A 12V C&K Electronics PTS635SK25SMTR LFS U1 PIC32MX470F512L-I/PT Microchip Technology Inc. PIC32MX470F512L-I/PT U2 IC PIC MCU FLASH 256K 64-pin TQFP Micr ochip Technology Inc. PIC24FJ256GB106-I/PT U3 IC REG LDO 1.5A 3.3V 8DFN Microchip Technology Inc. MCP1727-3302E/MF U4 IC EEPROM 256 kilobit 10 MHz 8 TSSOP M icrochip Technology Inc. 25LC256-I/ST U5 IC MULT CONFIG 3.3/5V .12A 8 MSOP Mi crochip Technology Inc. MCP1253-33X50I/MS U6 IC PWR DIST SWITCH SNGL SOT23-5 Texas Instruments TPS2051BDBVR U7 IC SWITCH LOAD FULL FUNC SOT23-5 Fairchild FPF2104 Y1 CRYSTAL 8 MHz 20 pF SMD Fox Electronics FQ7050B-8 Y3 CRYSTAL 12 MHz 8 PF SMD NDK NX3225SA-12.000000 MHZ +3.3V_PKOB, GND PC TEST POINT MINIATURE SMT Keystone Electronics 5015 “Feet” BUMPON CYLINDRICAL .375X.135 BLK 3M SJ61A8 C11, C12 (DNP) CAP CER 11PF 50V 5% NP0 0603 TDK Corporation C1608C0G1H110J Y2 (DNP) CRYSTAL 32 kHz 12.5 pF CYL ECS Inc. ECS-.320-12.5-13X MH1 (DNP) 0.120 Diameter hole, unplated DNP DNP (120 mm unplated hole) J2 (DNP) CONN HEADER .050" 6 PO S PCB GOLD SULLINS GRPB061VWVN-RC R8, R17, R38, R39, R41 (DNP) RES0603 DNP DNP DNP (RES0603) TABLE B-1: PIC32 USB STARTER KIT III BILL OF MATERIALS (CONTINUED) Reference Description Ma nufacturer Part No.

USER’S GUIDE  2013 Microchip Technology Inc. DS70005132B-page 29 Index C D Documentation H Hardware Features I M P PIC32 Layout S Starter Kit Board Starter Kit Layout Starter Kit Schematics U USB W

PIC32 USB Starter Kit III User’s Guide DS70005132B-page 30  2013 Microchip Technology Inc. NOTES:

 2013 Microchip Technology Inc. DS70005132B-page 31 NOTES:

DS70005132B-page 32  2013 Microchip Technology Inc. AMERICAS Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://www.microchip.com/ support Web Address: www.microchip.com Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Cleveland Independence, OH Tel: 216-447-0464 Fax: 216-447-0643 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Farmington Hills, MI Tel: 248-538-2250 Fax: 248-538-2260 Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 Santa Clara Santa Clara, CA Tel: 408-961-6444 Fax: 408-961-6445 Toronto Mississauga, Ontario, Canada Tel: 905-673-0699 Fax: 905-673-6509 ASIA/PACIFIC Asia Pacific Office Suites 3707-14, 37th Floor Tower 6, The Gateway Harbour City, Kowloon Hong Kong Tel: 852-2401-1200 Fax: 852-2401-3431 Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 China - Beijing Tel: 86-10-8569-7000 Fax: 86-10-8528-2104 China - Chengdu Tel: 86-28-8665-5511 Fax: 86-28-8665-7889 China - Chongqing Tel: 86-23-8980-9588 Fax: 86-23-8980-9500 China - Hangzhou Tel: 86-571-2819-3187 Fax: 86-571-2819-3189 China - Hong Kong SAR Tel: 852-2943-5100 Fax: 852-2401-3431 China - Nanjing Tel: 86-25-8473-2460 Fax: 86-25-8473-2470 China - Qingdao Tel: 86-532-8502-7355 Fax: 86-532-8502-7205 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 China - Shenzhen Tel: 86-755-8864-2200 Fax: 86-755-8203-1760 China - Wuhan Tel: 86-27-5980-5300 Fax: 86-27-5980-5118 China - Xian Tel: 86-29-8833-7252 Fax: 86-29-8833-7256 China - Xiamen Tel: 86-592-2388138 Fax: 86-592-2388130 China - Zhuhai Tel: 86-756-3210040 Fax: 86-756-3210049 ASIA/PACIFIC India - Bangalore Tel: 91-80-3090-4444 Fax: 91-80-3090-4123 India - New Delhi Tel: 91-11-4160-8631 Fax: 91-11-4160-8632 India - Pune Tel: 91-20-3019-1500 Japan - Osaka Tel: 81-6-6152-7160 Fax: 81-6-6152-9310 Japan - Tokyo Tel: 81-3-6880- 3770 Fax: 81-3-6880-3771 Korea - Daegu Tel: 82-53-744-4301 Fax: 82-53-744-4302 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Fax: 60-3-6201-9859 Malaysia - Penang Tel: 60-4-227-8870 Fax: 60-4-227-4068 Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 Taiwan - Hsin Chu Tel: 886-3-5778-366 Fax: 886-3-5770-955 Taiwan - Kaohsiung Tel: 886-7-213-7828 Fax: 886-7-330-9305 Taiwan - Taipei Tel: 886-2-2508-8600 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 EUROPE Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 France - Paris Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 UK - Wokingham Tel: 44-118-921-5869 Fax: 44-118-921-5820 Worldwide Sales and Service 08/20/13