DM136

DM134 SITI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 20

Technical content

DM134、DM135、DM136 Version : A.013 Issue Date : 2006/8/1 File Name : SP-DM134,135,136-A.013.doc Total Pages : 20 16-Bit Constant Current LED Drivers 新竹市科學園區展業一路9號7樓 之1 SILICON TOUCH TECHNOLOGY INC . 9-7F-1, Prosperity Road I, Science Based Industrial Park, Hsin-Chu, Taiwan 300, R.O.C. Tel：886-3-5645656 Fax ：886-3-5645626

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -1- Version ：A.013 DM134、DM135、DM136 16-Bit Constant Current LED Drivers General Description The DM134 、DM135、DM136 are constant current driver s specifically designed for LED display applications. The value of constant current can be varied using an external resistor. The devices include a 16-bit shift regi ster, latches, and constant curre nt drivers on a single Silicon CMOS chip.

Features

z 5V CMOS Compatible Input z Maximum Clock Frequency: 25MHz (Cascade Operation) z Maximum Output V oltage: 17V z Package: DIP24, SOP24, SSOP24, QFN32, TSSOP24-exposedPAD(DM135) z Package and Pin Layout: Pin layout and functionality are similar to those of the ST2221C. (Each characteristic value is different.) z Constant Current Matching: (Ta = 25 °C、VDD = 5.0V) C h i p - t o - C h i p : ± 10.0% Bit-to-Bit: DM134: ± 4.0% @ IOUT = 30 ~ 90mA ± 6.0% @ IOUT = 20 ~ 30mA DM135: ± 4.0% @ IOUT = 10 ~ 50mA ± 6.0% @ IOUT = 5 ~ 10mA DM136: ± 4.0% @ IOUT = 3 ~ 15mA

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -2- Version ：A.013 Pin Connection (Top view) DIP24、SOP24、SSOP24 Pin Connection (Bottom view) QFN32 GND SERIAL-IN SERIAL-OUT CLOCK OUT0 OUT1 OUT2 OUT3 OUT12 OUT13 OUT14 OUT15 R-EXT VDD 12 13 ENABLELATCH OUT4 OUT5 OUT6 OUT7 OUT11 OUT10 OUT9 OUT8 GND GND VDD REXT GND ENABLE GND OUT14 OUT13 OUT5 OUT12 OUT11 OUT9 OUT8 SERIAL_IN OUT10 GND GND GND LATCH GND OUT1 OUT2 OUT3 OUT4 OUT6 OUT7 VDD OUT0 OUT15 CLOCK SERIAL_OUT Thermal PAD 16 15 14 13 12 11 10 9 3231302928272625

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -3- Version ：A.013 Block Diagram Timing Diagram (Note) Latches are level sensitive (not edge triggered). LATCH-terminal = H level, latches become transparent; LATCH-terminal = L level, latches hold data. ENABLE-terminal = H level, all outputs (OUT0~15) are off. An external resistor is connected between R-EXT and GND for setting up the value of constant current. SERIAL-OUT changes state on the rising edges of clock. CLOCK SERIAL_IN LATCH ENABLE OUT0 OUT1 OUT2 OUT3 OUT13 OUT14 OUT15 ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF 0VSERIAL_OUT Previous Data

16 Clocks

Q CLOCK I-REG . SERIAL-IN LATCH R-EXT SERIAL-OUT OUT15OUT1 OUT0 DSTST QQ D ENABLE

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -4- Version ：A.013 Pin Description PIN No. PIN NAME FUNCTION

1 GND Ground terminal

2 SERIAL-IN Input terminal of a data shift register

3 CLOCK Input terminal of a clock for shift register

4 LATCH Input terminal of data strobe

5~20 OUT0~15 Output terminals

21 ENABLE Input terminal of output enable (active low)

22 SERIAL-OUT Output terminal of a data shift register

23 R-EXT Input terminal of an external resistor

24 V DD 5V Supply voltage terminal

Equivalent Circuit of Inputs and Outputs 1. ENABLE terminal 2. LATCH terminal 3. CLOCK, SERIAL-IN terminal 4. SERIAL-OUT terminal CLOCK, SERIAL-IN GND VDD GND VDD RIN (up) ENABLE SERIAL-OUT GND VDD LATCH GND VDD RIN

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -5- Version ：A.013 Maximum Ratings (Ta = 25°C, Tj(max) = 150°C) CHARACTERISTIC SYMBOL RATING UNIT Supply V oltage V DD 0 ~ 7.0 V Input V oltage V IN -0.4 ~ VDD+0.4 V 100 ( DM134 ) 60 ( DM135 ) Output Current I OUT 20 ( DM136 ) mA Output V oltage V OUT -0.3 ~ 17 V Clock Frequency f CLK 25 MHz 1600 ( DM134 ) 960 ( DM135 ) GND Terminal Current I GND 320 ( DM136 ) mA 2.5 (DIP-24 : Ta=25°C) 1.58 (SOP-24 : Ta=25°C) 1.39 (SSOP-24 : Ta=25°C) Power Dissipation (On 4-layer PCB) PD 3.08 (QFN-32 : Ta=25°C) W 50.0 (DIP-24) 79.2 (SOP-24) 90.2 (SSOP-24) 31 (TSSOP-24, Exposed PAD) Thermal Resistance (On 4-layer PCB) Rth(j-a) 40.6 (QFN-32) °C/W Operating Temperature Topr -40 ~ 85 °C Storage Temperature T stg -55 ~ 150 °C Recommended Operating Condition CHARACTERISTIC SYMBOL CONDITION MIN. TYP. MAX. UNIT Supply V oltage VDD ⎯ 4.5 5.0 5.5 V Output V oltage VOUT ⎯ ⎯ ⎯ 17 V Operating temperature T OPR ⎯ -40 ⎯ 85 ℃ IO OUTn 5 ⎯ 85 IOH SERIAL-OUT ⎯ ⎯ 1.0 Output Current IOL SERIAL-OUT ⎯ ⎯ -1.0 mA VIH ⎯ 0.7VDD ⎯ VDD+0.3 Input V oltage VIL ⎯ -0.3 ⎯ 0.3VDD V LATCH Pulse Width tw LAT 15 ⎯ ⎯ ns CLOCK Pulse Width tw CLK 15 ⎯ ⎯ ns Set-up Time for DATA tsetup (D) 10 ⎯ ⎯ ns Hold Time for DATA thold (D) 5 ⎯ ⎯ ns Set-up Time for LATCH tsetup (L) VDD = 4.5 ~ 5.5 V 15 ⎯ ⎯ ns Clock Frequency fCLK Cascade operation ⎯ ⎯ 25 MHz

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -6- Version ：A.013 Electrical Characteristics (VDD = 5.0 V, Ta = 25°C unless otherwise noted) CHARACTERISTIC SYMBOL CONDITION MIN. TYP. MAX. UNIT Input V oltage “H” Level VIH ⎯ 0.7VDD ⎯ VDD Input V oltage “L” Level VIL ⎯ GND ⎯ 0.3VDD V Output Leakage Current IOH VOH = 17 V ⎯ ⎯ 1.0 uA VOL IOL = 1.0 mA ⎯ ⎯ 0.4 Output V oltage ( S - OUT) VOH IOH = -1.0 mA 4.6 ⎯ ⎯ V DM134 REXT = 377 Ω DM135 REXT = 1260 Ω Output Current (Bit-Bit) ΔIout DM136 VOUT = 1.2V (1 channel on) REXT = 3830Ω ⎯ ±1.5 ±4 % DM134 REXT = 377Ω 36.0 40.0 44.0 DM135 REXT = 1260 Ω 9.38 10.42 11.46 Output Current (Chip-Chip) Iout DM136 VOUT = 1.2V (1 channel on) REXT = 3830Ω 2.7 3 3.3 mA IDM134 REXT = 377 Ω IDM135 REXT =1260 Ω Output V oltage Regulation IDM136 V out = 1.2V ~ 5.0V (% / V out) REXT = 3830Ω ⎯ 0.1 0.5 % / V Supply V oltage Regulation % / VDD Vdd = 4.5V ~ 5.5V ⎯ 0.5 1.5 % / V Pull-Up Resistor RIN(up) ⎯ 150 300 600 K Ω Pull-Down Resistor RIN(down) ⎯ 100 200 400 K Ω REXT = OPEN, all outputs off ⎯ 7.4 10 DM134 REXT = 210Ω, all outputs off ⎯ 24 34 REXT = OPEN, all outputs off ⎯ 7.4 10 DM135 REXT = 630Ω, all outputs off ⎯ 16 22 REXT = OPEN, all outputs off ⎯ 7.4 10 Supply Current “OFF” Idd (off) DM136 REXT = 2100Ω, all outputs off ⎯ 12 17 DM134 REXT = 210Ω, all outputs on ⎯ 26 36 DM135 REXT = 630Ω, all outputs on ⎯ 18 25 Supply Current “ON” Idd (on) DM136 REXT = 2100Ω, all outputs on ⎯ 14 20 mA

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -7- Version ：A.013 Switching Characteristics (Ta = 25 °C unless otherwise noted) DM134 CHARACTERISTIC SYMBOL CONDITION MIN. TYP. MAX. UNIT ENABLE-OUTn ⎯ 15 30 Propagation Delay Time (“L” to “H”) CLK-SOUT tpLH ⎯ 20 25 ns ENABLE-OUTn ⎯ 25 30 Propagation Delay Time (“H” to “L”) CLK-SOUT tpHL ⎯ 20 25 ns Output Current Rise Time tor 30 75 150 ns Output Current Fall Time tof VDD=5.0V VIH=VDD VIL=GND REXT=210Ω VL=5.0V RL=47Ω CL=13pF 10 20 40 ns DM135 CHARACTERISTIC SYMBOL CONDITION MIN. TYP. MAX. UNIT ENABLE-OUTn ⎯ 20 40 Propagation Delay Time (“L” to “H”) CLK-SOUT tpLH ⎯ 20 25 ns ENABLE-OUTn ⎯ 30 60 Propagation Delay Time (“H” to “L”) CLK-SOUT tpHL ⎯ 20 25 ns Output Current Rise Time tor 25 50 100 ns Output Current Fall Time tof VDD=5.0V VIH=VDD VIL=GND REXT=630Ω VL=5.0V RL=150Ω CL=13pF 15 30 60 ns DM136 CHARACTERISTIC SYMBOL CONDITION MIN. TYP. MAX. UNIT ENABLE-OUTn ⎯ 20 40 Propagation Delay Time (“L” to “H”) CLK-SOUT tpLH ⎯ 20 25 ns ENABLE-OUTn ⎯ 60 120 Propagation Delay Time (“H” to “L”) CLK-SOUT tpHL ⎯ 20 25 ns Output Current Rise Time tor 40 95 180 ns Output Current Fall Time tof VDD=5.0V VIH=VDD VIL=GND REXT=2100Ω VL=5.0V RL=475Ω CL=13pF 15 35 70 ns

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -8- Version ：A.013 Test Circuit DC characteristic AC characteristic IDD IIL ,IIH VIL ,VIH I ref IOL SERIAL-OUT OUT15 OUT0VDD GNDR-EXT LATCH SERIAL-IN CLOCK ENABLE VIL ,VIH VLCL CL CL RL RL SERIAL-OUT OUT15 OUT0VDD GNDR-EXT LATCH SW- MATRIX SERIAL-IN CLOCK ENABLE

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -9- Version ：A.013 Timing Diagram 1. CLOCK-SERIAL-IN, SERIAL-OUT, OUTn (current) 2. CLOCK-LATCH 3. ENABLE-OUTn (current) 50%50% 50%50% tpHLtpLH OUTn(current) ENABLE thold tsetup 50%50% 90% 50%50% 10%10% 50% 90% SERIAL-IN OUTn (current) CLOCK twCLK tftr 90% 50% 10%10% 50% 90% tof tpHLtpLH tor twCLK SERIAL-OUT 50% 50% tpLH tpHL 50% “L” level = DATA HOLD SERIAL-IN LATCH CLOCK tsetup(L) 50% thold(L) 50%

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -10- Version ：A.013 Output Current vs. External Resistor DM134 DM135 DM136 Note: The resistor should be placed as close to th e Rext terminal as possible to avoid the noise influence. Conditions: Vout=1.8V, Vref=1.27V DM134: Iout ≈ Vref / Rext * 12 DM135: Iout ≈ Vref / Rext * 10.3 DM136: Iout ≈ Vref / Rext * 9 Iout - Rext ( DM134 ) 0.00 20.00 40.00 60.00 80.00 100.00 120.00 0 200 400 600 800 Rext (Ohm) Iout (mA) Iout - Rext ( DM136 ) 0 2000 4000 6000 8000 Rext (Ohm) Iout (mA) Iout - Rext ( DM135 ) 0.00 10.00 20.00 30.00 40.00 50.00 60.00 0 2000 4000 6000 8000 10000 12000 Rext (Ohm) Iout (mA)

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -11- Version ：A.013 Output Current Performance vs. Output Voltage DM134 DM135 DM136 Note: In order to obtain a good consta nt current output, a suitable out put voltage is necessary. Users can get related information about the minimum ou tput voltage from the above graphs. Even under the same output current condition, the minimum output voltage required for each part is different. Iout - Vout(min) 00 . 511 . 52 Vout (min) (V) Iout (mA) DM134 DM135 DM136 Iout - Vout ( DM134) 0.00 20.00 40.00 60.00 80.00 100.00 012345 Vout (V) Iout (mA) Iout - Vout ( DM135 ) 012345 Vout (V) Iout (mA) Iout - Vout ( DM136 ) 0.00 3.00 6.00 9.00 12.00 15.00 012345 Vout (V) Iout (mA)

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -12- Version ：A.013 Note As the power dissipation of a semiconducto r chip is limited by its package and ambient temperature, this device requires a maximum out put current given by an operating condition. The maximum allowable power consumption (Pd (max)) of this device is calculated as follows: )/(Rth ))( )emperature(ambient t Ta- (max) e)temperatur(junction (Tj)(max)( WattC CWattPd ° Based on the Pd (max), the maximum allowable current can be calculated as follows: Iout = ( Pd – VDD‧IDD) / ( # outputs‧Vo‧Duty ) Imax - Ta ( DM136 ) 0.00 2.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 0 20 40 60 80 100 120 140 160 Ta Imax (mA) Imax - Ta ( DM135 ) 0.00 10.00 20.00 30.00 40.00 50.00 60.00 0 2 04 06 08 0 1 0 0 1 2 0 1 4 0 1 6 0 Ta Imax (mA) Imax - Ta ( DM134 ) 0.00 10.00 20.00 30.00 40.00 50.00 60.00 70.00 80.00 90.00 100.00 0 20 40 60 80 100 120 140 160 Ta Imax (mA) Pd - Ta 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 0 20 40 60 80 100 120 140 160 Ta Pd (W) Vdd = 5V V out = 1.5V 16bit Active Vdd = 5V V out = 1.5V 16bit Active Vdd = 5V V out = 1.5V 16bit Active DIP QFN SSOP DIP QFN SSOP SSOP QFN DIP SSOP DIP QFN SOP SOP SOP SOP

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -13- Version ：A.013 System Configuration Example [1] Output current (IOUT) Sink current is set by the external resistor as shown in the figure of Iout vs. Rext. [2] LED supply voltage (VLED) setup VLED = VCE ( Tr Vsat ) + Vf ( LED forward voltage ) + VO ( IC supply voltage) To prevent too much power from dissipating by the higher V LED of the device, an additional R can be used to reduce the V out when the outputs consume current is as follows: R = (max)*(max) (min) BitI VVVV O OfCELED −−− Note This device has only one ground pin shared by signal, output sink current, and power ground. It is advisable to pattern the ground layout with mini mized inductance so that the switching noise induced by the input signals and the output sink current would not cause chip malfunction. To prevent drivers’ outputs from damaging by overshoot stresses, it is also advisable not to turn off the drivers and scan transistors simultaneously. For the QFN package, the IC’s thermal pad, which is internally connected to the bottom side of chip, should be connected to GN D. In addition, a good PCB layout pattern of the thermal pad is required in order to have a better performance in thermal effect. SERIAL-OUT VLED = 3~4 (V) OUT15 OUT0 GNDR-EXT LATCH CPU SERIAL-IN SCAN CLOCK SERIAL-OUT OUT15 OUT0 GNDR-EXT LATCH SERIAL-IN CLOCK R VCE —Vf Vo ENABLE ENABLE

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -14- Version ：A.013 Package Outline P-DIP 24 UNIT：INCH 0.100typ 0.018typ 0.060typ 0.130 ± 0.02 SEATING PLANE 0.130 ±0.05 0.210 1.250 ± 0.03 0.258 ±0.005 0.300 0.355 ± 0.02 θ=7 ~15

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -15- Version ：A.013 Package Outline SOP24 0.295 ±0.004 0.020*45° 0.406 ± 0.013 0.050typ 0.016typ 0.600 ± 0.014 0.099± 0.006 0.012max 0.004max θ=0~8 0.010 0.035±0.015 UNIT：INCH

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -16- Version ：A.013 Package Outline SSOP24 0.154 ±0.004 0.020*45° 0.236 ± 0.008 0.025typ 0.012typ 0.341 ± 0.004 0.064± 0.011 0.01max 0.004max θ=0~8 0.010 0.025±0.025 UNIT：INCH

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -17- Version ：A.013 Package Outline TSSOP24 (Exposed PAD) NOTES: 1. DIMENSION D DOES NOT INCLUDE MODE FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.15 PER SIDE. 2. DIMENSION E1 DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 PER SIDE. 3. DIMENSION b DOES NOT INCLUDE DAMBER PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08MM TOTAL IN EXCESS OF THE b DIMENSION AT MAXIMUM MATERIAL CONDITION. DAMBAR CANNOR BE LOCATED ON THE LOWER RADIUS OF THE FOOT. MINIMUM SPACE BETWEEN PROTRUSION AND ADJACENT LEAD IS 0.07MM. 4. DIMENSIONS D AND E1 TO BE DETERMINED AT DATUM PLANE. JEDEC θ S L e E D b A SYMBOL MIN. NOM. MAX. DIMENSION IN MM 1.2 0.00 0.15 0.80 1.00 1.05 0.19 0.3 7.7 7.8 7.9

6.40 BSC

4.3 4.4 4.5 0.45 0.60 0.75 0.2 0.5 0 8 MO - 153 (ADT)

0.65 BSC

L1 1.00 REF D1 3.61 REF E2 1.95 REF GAUGE PLANE 0.25 MM L θSEATING PLANE S DETAIL A b A1e A 0.05MM C D E DETAIL A

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -18- Version ：A.013 Package Outline QFN32 DIMENSION (mm) DIMENSION (MIL) SYMBOL A1 0 0.02 0.05 0 0.79 1.97 A3 0.25 REF 9.84 REF D 5.00 BSC 196.85 BSC E 5.00 BSC 196.85 BSC e 0.50 BSC 19.69 BSC y 0.10 3.94 Note: 1.DIMENSIONING AND TOLERANCING CONFORM TO ASME Y145.5M-1994. 2. REFER TO JEDEC STD. MO-220 WHHD-2 ISSUE A 16 9 25 32 BOTTOM VIEW D2D e b eL E SEATING PLANE A y C 0.10 C

0.10 M CAB

0.25 C 0.25 C

DM134、DM135、DM136 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 16-Bit Constant Current LED Drivers -19- Version ：A.013 The products listed herein are designed for ordinary electronic applications, such as electrical appliances, audio-visual equipment, communications devices and so on. Hence, it is advisable that the devices should not be used in medical instruments, surgical implants, aerospace machinery, nuclear power control systems, disaster/crime-prevention equipment and the like. Misusing those products may directly or indirectly endanger human life, or cause injury and property loss. Silicon Touch Technology, Inc. will not take any responsibilities regarding the misusage of the products mentioned above. Anyone who purchases any products described herein with the above-mentioned intention or with such misused applications should accept full responsibility and indemnify. Silicon Touch Technology, Inc. and its distributors and all their officers and employees shall defend jointl y and severally against any and all claims and litigation and all damages, cost and expe nses associated with such intention and manipulation.