PAGE . 1November 14,2014-REV.02

Document overview

  • PDF pages: 5

Technical content

PAGE . 1November 14,2014-REV.02 DI100S~DI1010S

  • Plastic material used carries Underwriters Laboratory recognition 94V-O
  • Low leakage
  • Surge overload rating--30 amperes peak
  • Ideal for printed circuit board
  • Exceeds environmental standards of MIL-S-19500/228
  • Lead free in compliance with EU RoHS 2011/65/EU directive
  • Green molding compound as per IEC61249 Std. . (Halogen Free) MECHANICAL DATA
  • Case: Reliable low cost construction utilizing molded plastic technique results in inexpensive product
  • Terminals: Lead solderable per MIL-STD-750, Method 2026
  • Polarity: Polarity symbols molded or marking on body
  • Weight: 0.01058 ounce, 0.3 gram SURFACE MOUNT GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified.Single phase, half wave, 60Hz, Resistive or inductive load. For capacitive load, derate current by 20% NOTES: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts 2. Mounted on a FR4 PCB, single-sided copper, with 100cm 2 copper pad area

FEATURES

Recongnized File #E111753 VOLTAGE 50 to 1000 Volt 1 AmpereCURRENT PARAMETER SYMBOL DI100S DI101S DI102S DI104S DI106S DI108S DI1010S UNITS Maximum Recurrent Peak Reverse Voltage V RRM 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage V RMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage V DC 50 100 200 400 600 800 1000 V Maximum Average Forward Current T A=40 OCI F(AV) 1A Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load I FSM 30 A I 2t Rating For Fusing (t<8.35ms) I 2t3 . 7 3 5 A 2S Maximum Forward Voltage Drop per Bridge Element at 1A V F 1.1 V Maximum DC Reverse Current at Rated DC Blocking Voltage TA=25 OC TA=125 OC IR 500 μA Typical Junction Capacitance (Note 1) C J 25 pF Typical Thermal Resistance Per Leg (Note 2) RθJA RθJL O C / W Operating Junstion and Storage Temperature Range T J,T STG -55 to +150 OC 0.335(8.51) 0.316(8.05) 0.406(10.3) 0.360(9.40) 0.255(6.5) 0.245(6.2) 0.045(1.14) 0.035(0.89) 0.098(2.5) 0.290(7.4) 0.011(0.28) 0.004(0.10) 0.009(0.25) 0.060(1.524) 0.040(1.016)

PAGE . 2November 14,2014-REV.02 DI100S~DI1010S 0.01 0.1 0.4 0.6 0.8 1 IF, Forward Current (A) VF, Forward Voltage (V) TJ = 150°C TJ = 125°C TJ = 25°C TJ = 75°C per diode 0.001 0.01 0.1 100 10 20 30 40 50 60 70 80 90 100 IR, Reverse Current (μA) TJ = 25°C TJ = 75°C TJ = 125°C TJ = 150°C per diode Percent of Rated Peak Reverse Voltage (%)

PAGE . 3November 14,2014-REV.02 DI100S~DI1010S MOUNTING PAD LAYOUT ORDER INFORMATION

  • Packing information T/R - 1.5K per 13" plastic Reel

PAGE . 4November 14,2014-REV.02 DI100S~DI1010S Part No_packing code_Version DI100S_R2_00001 DI100S_T0_00001 For example : RB500V-40_R2_00001 Part No. Serial number Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1st Code Packing size code 2nd Code HF or RoHS 1st Code 2 nd~5th Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CA THODE UP (PBCU) U FORMING F PANASERT T/B CA THODE DOWN (PBCD) D

PAGE . 5November 14,2014-REV.02 DI100S~DI1010S Disclaimer

  • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc..
  • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred.
  • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
  • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
  • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale.
  • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining.