DI050N04PT DIOTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

Tiny, space saving package Low profile height Low on state resistance Fast switching times Low gate charge Compliant to RoHS, REACH, Conflict Minerals 1) Besonderheiten Winzige, platzsparende Bauform Niedrige Bauhöhe Niedriger Einschaltwiderstand Schnelle Schaltzeiten Niedrige Gate-Ladung Konform zu RoHS, REACH, Konfliktmineralien 1) Mechanical Data 1) Mechanische Daten 1) Taped and reeled 5000 / 13“ Gegurtet auf Rolle Weight approx. 0.1 g Gewicht ca. Case material UL 94V-0 Gehäusematerial Solder & assembly conditions 260°C/10s Löt- und Einbaubedingungen MSL = 3 Maximum ratings 1) Grenzwerte 2) DI050N04PT/-AQ Drain-Source voltage Drain-Source-Spannung VGS = 0 V (short) VDSS 40 V Gate-Source-voltage continuos – Gate-Source-Spannung dauernd VGSS ± 20 V Power dissipation – Verlustleistung TC = 25°C 2) Ptot 30 W Drain current continous Drainstrom dauernd TC = 25°C 3) TC = 100°C 3) ID 50 A 32 A Peak Drain current – Drain-Spitzenstrom 3) IDM 220 A Source current continous Sourcestrom dauernd TC = 25°C 3) IS 40 A Peak Source current – Source-Spitzenstrom tp = 10 ms ISM 80 A Single pulse avalanche energy Einzelpuls Avalanche-Energie (Fig. 1) IDS = 20.3 A, VG = 10 V L = 0.5 mH, RG = 25 Ω EAS 103 mJ Junction temperature – Sperrschichttemperatur Storage temperature – Lagerungstemperatur Tj TS -55…+175°C -55…+175°C

1 Please note the detailed information on our website or at the beginning of the data book

Bitte beachten Sie die detaillierten Hinweise auf unserer Internetseite bzw. am Anfang des Datenbuches

1 TA = 25°C, unless otherwise specified – TA = 25°C, wenn nicht anders angegeben

2 Measured towards heat sink area (Drain) – Gemessen zur Kühlfläche (Drain)

3 Pulse width refer to SOA diagram – Pulsbreite siehe SOA-Diagramm

© http://www.diotec.com/ 1 G D S 1 2 3 4 8 7 6 5 Pb ELV W EEE RoHS Halogen FREE

Characteristics (static) Kennwerte (statisch) Tj = 25°C Min. Typ. Max. Drain-Source breakdown voltage – Drain-Source-Durchbruchspannung ID = 250 µA VGS = 0 V (short) V(BR)DSS 40 V – – Drain-Source leakage current – Drain-Source Leckstrom VDS = 0.8*VDSS VGS = 0 V (short) IDSS – – 1 µA Gate-Body leakage current – Gate-Substrat Leckstrom VGS = ±20 V VDS = 0 V (short) IGSS – – ± 100 nA Gate-Source threshold voltage – Gate-Source Schwellspannung VGS = VDS ID = 250 µA VGS(th) 1 V 1.6 V 2.5 V Drain-Source on-state resistance – Drain-Source Einschaltwiderstand VGS = 10 V ID = 10 A VGS = 4.5 V ID = 5 A RDS(on) – 4.6 mΩ 5.7 mΩ 7 mΩ Characteristics (dynamic) Kennwerte (dynamisch) Tj = 25°C Min. Typ. Max. Forward Transconductance – Übertragungssteilheit VDS = 5 V ID = 5 A gFS – 18.8 S – Input Capacitance – Eingangskapazität VDS = 20 V VGS = 0 V f = 1 MHz Ciss – 3255 pF – Output Capacitance – Ausgangskapazität VDS = 20 V VGS = 0 V f = 1 MHz Coss – 260 pF – Reverse Transfer Capacitance – Rückwirkungskapazität VDS = 20 V VGS = 0 V f = 1 MHz Crss – 195 pF – Turn-On Delay & Rise Time – Einschaltverzögerung und Anstiegszeit VDD = 20 V ID = 10 A VGS = 10 V RG = 3.3 Ω (Fig. 1) td(on) tr – 22 ns 26 ns – Turn-Off Delay & Fall Time – Ausschaltverzögerung und Abfallzeit VDD = 20 V ID = 10 A VGS = 10 V RG = 3.3 Ω (Fig. 1) td(off) tf – 21 ns 3 ns – Total Gate Charge – Gesamte Gate-Ladung VDD = 20 V ID = 10 A VGS = 10 V Qg – 70 nC – Gate-Source Charge – Gate-Source-Ladung VDD = 20 V ID = 10 A VGS = 10 V Qgs – 10 nC – Gate-Drain Charge – Gate-Drain-Ladung VDD = 20 V ID = 10 A VGS = 10 V Qgd – 13nC – Intrinsic Gate resistance – Innerer Gatewiderstand f = 1 Mhz D open RGi – 0.5 Ω – 2 http://www.diotec.com/ © td(on) VGS 90% 10% VDS tr td(off) tfFig. 1 Test circuit for switching times (R) and avalanche energy (L) (“rise“ and “fall“ refer to I)D Testaufbau für Schaltzeiten (R) und Avalanche-Energie (L) (“rise“ und “fall“ beziehen sich auf ID) VGS RG R VDS VDD ID L

Characteristics (diode) Kennwerte (Diode) Tj = 25°C Min. Typ. Max. Forward voltage – Durchlass-Spannung VGS = 0 V IS = 10 A VSD – – 1.2 V Reverse recovery time – Sperrverzugszeit IS = 10 A, di/dt = -100 A/µs trr – 16 ns – Reverse recovery charge – Sperrverzugsladung IS = 10 A, di/dt = -100 A/µs Qrr – 9 nC – Characteristics (thermal) Kennwerte (thermisch) Thermal resistance junction to case Wärmewiderstand Sperrschicht – Gehäuse RthC < 5 K/W 1) Dimensions - Maße [mm]

1 Measured towards heat sink area (Drain) – Gemessen zur Kühlfläche (Drain)

© http://www.diotec.com/ 3

Disclaimer: See data book page 2 or website Haftungssauschluss: Siehe Datenbuch Seite 2 oder Internet 4 http://www.diotec.com/ © Typical output characteristics Typische Ausgangskennlinien [A] [V]VDS 642 ID 400 320 240 160 V = 4.5VGS V = 5.5VGS V = 5VGS V = 10VGS V = 7VGS V = 4VGS V = 3.5VGS V = 3VGS V = 6VGS Typical drain source on resistance )1 Typischer Drain-Source Einschaltwiderstand 1 RDS(on) [mOhm] [V]VGS 1042 I = 10 AD 5 6 87 Tj = 25 °C Tj = 1 25 °C Normalized On Resistance (a) vs Tj Normierter Einschaltwiderstand (a) über Tj a [°C]Tj 1005025-25 V = 4.5VGS I = 5AD 75 175 2.6 3.0 V = 10VGS I = 10AD2.2 1.8 1.4 1.0 0.1 [A] [V] ID VDS Safe operating area for single pulses Sicherer Arbeitsbereich für Einzelpulse R lim itD S(o n ) T = 25 °CC T = 1 7 5°Cj 1 10 100 10 0µs DC 1 m s 10 m s t = 1 0 µsp 0.1 102 -25 V = VDS GS I = 250µAD 25 75 175 1.8 1.6 1.4 1.2 1.0 0.8 V = VDS GS I = 2.5mAD Typical gate threshold voltage vs Tj Typische Schwellspannung über Tj 2.0 VGS(th) [°C]Tj 10050 [A] ID Typical transfer characteristics Typische Übertragungskennlinien

1 VGS 3 4 [V]

T = 25 °Cj V = 5VDS T = 12 5°Cj 160 120 100 Relative transient thermal impedance vs. pulse duration (typical) Relativer transienter Wärmewiderstand über Impulsdauer (typisch) ZthC 10 [s] 10 10 10 10 [t ] 10-5 -4 -3 -2 -1 0 p 10-1 10-2 D =0.9 0 t Tp D = t/Tp 0.5 0.1 0.01 D 0 0.05 0.3

The information presented in our data sheets and other docu - ments is to the best of our knowledge true and accurate. It de - scribes the type of component or application and shall not be considered as assured characteristics. No warranty or guaran - tee, expressed or implied is made regarding the capacity, deliv - ery, performance or suitability of any product or circuit etc, nei - ther does it convey any license under the patent rights of oth - ers. Diotec reserves the right to make changes without further no - tice. However, regular updating of all product information is provided on our website 1). All Diotec products are sold and shipped subject to our “Standard Terms and Conditions of Busi - ness” 2). The reproduction of all documents is prohibited with - out the expressed written permission of Diotec Semiconductor AG's Managing Board. Disclaimer 1. All products described or contained are designed and intend - ed for use in standard applications, so called commercial/indus - trial grade, requiring an ordinary level of reliability. 2. Some products are available with the special grades “AEC- Q101 compliant” respectively “AEC-Q101 qualified”. These are automotive standards 3). 3. Customers using these parts in applications requiring a spe - cial or specific grade of quality or reliability, such as (but not limited to) life supporting devices or systems, where failure or malfunction of the product may directly affect human life or health, are obliged to validate whether the use in such cases is appropriate. Diotec does not assume any liability arising out of such applica - tions or uses of its products. Usage in all such cases is on the own and sole risk of the customer. 4. Although Diotec continuously enhances the quality and relia - bility of its products, customers must incorporate sufficient safe- ty measures in their designs, such as redundancy, fire contain - ment, and anti-failure, so that personal injury, fire or environ - mental damage can be prevented. Diotec excludes explicitly ev - ery implied warranty or liability regarding the fitness of the products to any other than standard applications. 5. All information described or contained herein are subject to change without notice. Please contact Diotec to obtain the lat - est information before incorporating Diotec products into any design. 6. All information described and contained herein are intended only to enable the buyer to order Diotec's products. The infor - mation must not be used for any other purpose. 7. In the event that any product described or contained herein falls under the category of strategic products controlled by the German Federal Office of Economics and Export Control, this product must not be exported without obtaining an export li - cense from the German Federal Ministry for Economic Affairs and Climate Action in accordance with the valid laws. Alle Rechte vorbehalten Die Angaben in unseren Datenblättern und sonstigen Dokumen- ten sind nach bestem Wissen und Gewissen gemacht. Sie die - nen jedoch allein der Beschreibung und sind nicht als zugesagte Eigenschaften im Rechts-Sinne zu verstehen. Es wird keine Ge - währ bezüglich Liefermöglichkeit, Ausführung oder Einsatzmög - lichkeit der Bauelemente übernommen, noch dass die angege - benen Bauelemente, Baugruppen, Schaltungen etc. frei von Schutzrechten sind. Wir behalten uns Änderungen der aufgeführten Daten ohne vor- herige Ankündigung vor. Alle Änderungen werden jedoch regel - mäßig auf unserer Internet-Seite veröffentlicht 1). Verkauf und Lieferung von Diotec-Produkten erfolgt gemäß unseren “Allge - meinen Geschäftsbedingungen” 2). Die Vervielfältigung aller Do- kumente ist nur mit schriftlicher Genehmigung des Vorstandes der Diotec Semiconductor AG gestattet. Haftungsausschluss 1. Alle beschriebenen oder enthaltenen Produkte sind für den Gebrauch in Standardanwendungen mit einem gewöhnlichen Zuverlässigkeitsniveau entworfen und bestimmt, bekannt als kommerziell/industrielle Anwendungen. 2. Einige Produkte sind mit den speziellen Qualifikationen „AEC- Q101 konform“ oder „AEC-Q101 qualifiziert“ erhältlich. Dies sind Automotive-Standards 3). 3. Falls diese Produkte in Anwendungen verwendet werden sol - len, die einen besonderen Grad der Qualität oder Zuverlässig - keit erfordern, z. B. (aber nicht begrenzt auf) lebenserhaltende Geräte oder Systeme, bei denen durch Ausfall oder eine Stö - rung des Produktes menschliches Leben oder Gesundheit direkt beeinflusst werden kann, ist der Anwender verpflichtet sicherzu- stellen, dass der beabsichtigte Gebrauch des vorgesehenen Pro- duktes unbedenklich ist. Diotec übernimmt keine Haftung die sich aus solchen Anwen - dungen oder der Verwendung der Produkte ergibt. Der Ge - brauch für alle solche Anwendungen erfolgt auf eigenes und ausschließliches Risiko des Anwenders. 4. Obwohl Diotec die Qualität und die Zuverlässigkeit seiner Produkte beständig erhöht, müssen Kunden ausreichende Si - cherheitsvorkehrungen in ihren Designs vornehmen – wie Red - undanz, Feuereindämmung und Ausfallschutz – damit Perso - nenschäden, Feuer oder Umweltschädigung verhindert werden können. Diotec schließt ausdrücklich jede implizierte Garantie oder Verbindlichkeit aus, welche die Eignung der Produkte zu ir- gendwelchen anderen als Standardanwendungen betrifft. 5. Alle Informationen, die hier beschrieben oder enthalten sind, können jederzeit ohne jede Benachrichtigung geändert werden. Vor Einsatz eines Diotec Produktes in irgendeiner Anwendung sind bei Diotec die neuesten Informationen einzuholen. 6. Alle Informationen, die hier beschrieben oder enthalten sind, sollen dem Kunden nur ermöglichen, Diotec Produkte zu bestel - len. Die Informationen dürfen zu keinem anderen Zweck ver - wendet werden. 7. Sollte ein hier beschriebenes oder enthaltenes Produkt unter Beschränkungen fallen, die durch das deutsche Bundesamt für Wirtschaft und Ausfuhrkontrolle geregelt werden, darf dieses Produkt in Übereinstimmung mit den gültigen Gesetzen nicht ohne Exportgenehmigung vom deutschen Bundesministerium für Wirtschaft und Klimaschutz exportiert werden. 1 Refer to http://diotec.com/ “Products/Product Changes” respectively “News/Datasheets” Siehe http://diotec.com/ „Produkte/Produktänderungen“ bzw. „News/Datenblätter“ 2 Refer data book or http://diotec.com/ “Company” – Siehe Datenbuch oder http://diotec.com/ „Unternehmen“ 3 Refer to http://diotec.com/ “Products/Information/Qualification/Commercial Grade and AEC-Q101” Siehe http://diotec.com/ „Produkte/Informationen/Qualifizierung/Standard und AEC-Q101“ © Diotec Semiconductor AG http://diotec.com/ Disclaimer