DH-FC1 GAMEWELL-FCI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Very low current draw.
  • Superior holding force and low residual magnetisms.
  • Durable die-cast metal.
  • High lustre double chrome or brass plating.
  • Dual-voltage AC or DC inputs.
  • Terminal block connections.
  • Single-or double-coil floor, furface, and direct mounting (no brackets required).
  • Aircraft-quality DH drill fixture available to reduce installation time and costs.
  • Extension and misalignment rods. Listings Listings and approvals below apply to the DH Series Electromagnetic Door Holders. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status.
  • UL Listed: DH Series Electromagnetic Door Holders

Description

Gamewell’s DH Series of electro- magnetic fire door holders are constructed of durable die-cast metal finished in high-lustre double chrome or brass plating. Other features inclued standard dual-voltage AC and DC inputs of 24 and 120 volts (standard), as well as 12 and 24 volts and at 24 and 220 volts models. While reducing stocking requiements, the 24 and 120 volts model draws only 0.020 mA at 24 VDC, lowering overall job costs. Other features include single or double-coil floor mounting, surface mounting and direct wall mount- ing. No brackets are required. The DH Series door holders offer installation using an adhesive template assuring alignment without secondary adjustments. Accessories include extension and misalignment rods (various lengths) for correct alignment between door and wall at distances greater than 12.0" (30.48 cm) and misalignment over 4.0" (10.16 cm). The aircraft-quality DH drill fixture reduces installation time and provides a near-perfect alignment of catch-plate and armature. Basic units offer superior holding force and low residual magnetism. Models working at 12 and 24 volts and at 24 and 120 volts can operate at higher listed voltages, producing holdng forces in excess of 100 pounds (45.3 kg) for special applications. Standard Application Gamewell’s electromagnetic DH Series door holders are designed to hold self-closing swinging doors open until energized by a remote sensing device responding to smoke, heat, or flames, alarm systems, or a switch. When de-energized, the door holder releases the door, enabling it to swing closed to check the spread of smoke, heat, or flames. The door holder can also be used in other remote door-closing applications as well. The units are recommended for automatic area protection against smoke, heat, or flames in schools, hospitals, nursing homes, offices, and other public buildings of all kinds. Gamewell’s DH Series of electromagnetic door holders are specially engineered for easy connection to dectectors, sensors, alarm systems, and annunciators.

DH Series CS-2482 09/01/06Page 2 of 2 Specifications and wiring information are provided for information only and are believed to be accurate. Gamewell-FCI assumes no responsibility for their use. Data and design are subject to change without notice. Installation and wiring instructions shipped with the product shall always be used for actual installation. For more information, contact Gamewell-FCI. Gamewell-FCI

12 Clintonville Road

Northford, CT 06472-1610 Phone: 203-484-7161 Fax: 203-484-7118 www.gamewell-fci.com A Honeywell Company © 2006 Gamewell-FCI Electrical/Mechanical Specifications

Ordering Information

Door holders: DH-FC1 Door holder, semi-flush, chrome. DH-FB1 Door holder, semi-flush, brass. DH-SC1 Door holder, surface mount, chrome. DH-SB1 Door holder, surface mount, brass. DH-GC1 Door holder, ground mount, single-door, chrome. DH-GB1 Door holder, ground mount, single-door, brass. DH-GC2 Door holder, ground mount, double-door, chrome. DH-GB2 Door holder, ground mount, double-door brass. Extensions: DHE1C 1" (2.54 cm) Extensions rod, chrome. DHE1B 1" (2.54 cm) Extension rod, brass. DHE15C 1" (2.54 cm) Extension rod, chrome. DHE15B 1" (2.54 cm) Extension rod, brass. DHE2C 2" (5.08 cm) Extension rod, chrome. DHE2B 2" (5.08 cm) Extension rod, brass. DHE3C 3" (7.62 cm) Extension rod, chrome. DHE3B 3" (7.62 cm) Extension rod, brass. DHE4AC 4" (10.16 cm) Adjustable extension rod, chrome. DHE4AB 4" (10.16 cm) Adjustable extension rod, brass. Voltage DC/mA AC/mA Terminals LB. KG. 12 V 0.040 0.038 Common & Low Voltage 30 13.6 24 V 0.040 0.036 Common & High Voltage 30 13.6 24 V 0.020 0.019 Common & Low Voltage 40 18.1 12 V — 0.020 Common & High Voltage 35 15.8 24 V 0.020 0.019 Common & Low Voltage 40 18.1 220 V — 0.015 Common & High Voltage 25 11.3 24 V 0.085 0.081 Common & Low Voltage 75 34.0 120 V — 0.100 Common & Low Voltage 110 49.8 NOTE: Holding forces listen in above table correspond with shaded values; non-shaded values are slightly less. HI GH HOLDI NG FORCE/ SPECI AL APPLI CATI ONS: To obtain performance values in talbe above, apply high voltage to low voltage terminals (C & L). This configuration can only be applied to 12 & 24 volts and 24 & 120 volts models. Accessories: DHCP Catch plate, chrome. DHCPB Catch plate, brass. DHSBC Swivel base, chrome. DHSBB Swivel base, brass. DHBBC Back box, chrome. DHBBB Back box, brass. DHW Extension wrench. (2 pieces) DHDF Swivel base mounting drill fixture.