DHE0.5A JUXING | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
Ideal for automated placement Glass passivated chip junctions Low forward voltage drop Low leakage current High forward surge capability High temperature soldering： 260℃/10 seconds at terminals Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC Mechanical Date Major Ratings and Characteristics Case: JEDEC SOD-123FL molded plastic body over glass passivated chip Terminals: Solder plated, solderable per J-STD-002B and JESD22-B102D Polarity: Laser band denotes cathode end I R 5 μA V F 1.0V, 1.3V, 1.7V I F(AV) 0.5A V RRM
50 V to 1000 V
I FSM 15 A Weight: 0.017gram Maximum Ratings & Thermal Characteristics A = 25 °C unless otherwise noted)
Electrical Characteristics
A = 25 °C unless otherwise noted) Note 2: Pulse test:300μs pulse width,1% duty cycle. 150Thermal resistance from junction to ambient (1) Items Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load 0.5 Operating junction and storage temperature range UNIT Symbol V RRM V RMS V DC I F(AV) I FSM T T STG t rr 75 nS V F V1.3 1.7 μA50 1.0 I R Symbol DHE0.5A~0.5D –55 to +150 DHE0.5E~0.5GDHE0.5J~0.5M 200 300 400 A ℃/ W 600 800 1000 V A V 35 70 140 210 280 420 560 700 V UNIT 50 100 200 300 400 DHE 0.5A 600 800 1000 DHE 0.5G T j max. 150 °C DHE 0.5J DHE 0.5K DHE 0.5M DHE 0.5B DHE 0.5D DHE 0.5E Test conditionsItems Instantaneous forward voltage I F =0.5A (2) R θJA 50 100 V R DC T A =25℃ T A =100℃ I F = 0.5 A , I R = 1.0 A , I rr = 0.25 A Reverse current Reverse recovery time http://www.trr-jx.com Surface Mount Ultra Fast Rectifiers
A =25 ℃ unless otherwise noted) http://www.trr-jx.com DHE0.5A~DHE0.5M Surface Mount Ultra Fast Rectifiers
Product is intended for use in general electronics applications. Product should be worked less than the ratings; if exceeded, may cause permanent damage.or introduce latent failure mechanisms. The absolute maximum ratings are rated values and must not be exceeded during operation. The following are the general derating methods you design a circuit with a device. I F(AV) We recommend that the worst case current be no greater than 80% . I FSM : This rating specifies the non-repetitive peak current. This is only applied for an abnormal operation, which the general during the lifespan of the device. T J : Derate this rating when using a device in order to ensure high reliability. We recommend that the device be used at a T J of below 125°C. TRR is registered trademark of Rising-sun Technology. Rising-sun Technology reserves the right to make changes to any product in this specification to improve reliability,functional characteristics,or design without notice. Rising-sun Technology does not assure any liability arising out of the applications or any product described in this specification. Rising-sun Technology advises customers to obtain the latest version of the device information before placing orders to verify that the required information is current. http://www.trr-jx.com DHE0.5A~DHE0.5M Surface Mount Ultra Fast Rectifiers