DH1364 MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Series Number 3004 9th Avenue SW3005 9th Avenue SW DH8950 Watertown, SD 57202Watertown, SD 57203 DH1364 Toll free: 888-978-2639Toll free: 888-978-2640 DH2280 Ph: 605-886-3327Ph: 605-886-3328 Fax: 605-886-8996Fax: 605-886-8997 SMD Unshielded Self-Leaded Inductor ; Part Numbering Sequence: ( Series Number ) - ( Suffix Code )(Tolerance), example DH1364-100M Bulk Packaging add (-B) to end of Part Numbering Sequence. example DH1364-100M-B Series Number Units L W H A B C DH8950 DH1364 DH2280 Significant Digit Suffix DCR2 ISAT

4 IRMS

5 Tolerance DCR2

3 IRMS

5 Tolerance Dot Code

µH Codes W A Suffix6 W A Suffix6 W A Suffix6 1st 2nd 3rd 0.33 R33 0.002 20.0 16.0 M Orange Orange Brown 0.56 R56 0.010 7.7 6.00 M Green Blue Brown 0.68 R68 0.005 13.0 12.0 M Blue Grey Brown 0.78 R78 0.0026 30.0 15.0 M Violet Grey Brown 1.0 1R0 0.006 11.0 10.0 M Brown Black Red 1.2 1R2 0.017 5.3 4.40 M Brown Red Red 2.7 2R7 0.012 7.0 6.6 M Red Violet Red 3.9 3R9 0.0100 15.0 9.0 M Orange White Red 6.0 6R0 0.0170 12.0 7.5 M Blue Black Red 6.8 6R8 0.035 3.6 4.5 M Blue Grey Red 7.8 7R8 0.0180 11.0 7.5 M Violet Grey Red 68 680 0.300 1.20 1.50 M Blue Grey Orange 100 101 0.400 0.95 1.2 M Brown Black Yellow 1) Tolerance ±20%, Tested at 100kHz, 100mVrms @20°C. DH8950 series tested at 100kHz, 250mVrms @20°C. 2) DCRs (DC resistances) are maximums @20°C. 3) DC (Direct Current) current applied to produce a typical 10% drop from measured nominal inductance. 4) DC (Direct Current) current applied to produce a typical 30% drop from measured nominal inductance. 5) Current applied to produce a typical 40°C temperature rise from measured nominal inductance. 6) Tolerance M = ±20% Call Toll Free: 888-978-2638 Website: www.coev.net DH2280 Maximum Dimensions Nominal Dimensions DH8950 DH1364 B A C B Suggested Land Pattern DH8950 Suffix Code XXX 1st significant digit 3rd significant digit 2nd significant digit Parts will be marked with Significant Digit Dots OR Suffix code H L W Suggested Land Pattern DH1364 & DH2280 B A C B Specifications subject to change without notice Features: High energy sotrage and low resistance Ideal for DC-DC step-up or step-down conversion Reliable surface mounting, flat top for pick and place Robust temperature deflection to prevent damage during solder reflow

Series Reel dimensions Reel Packaging Number Units A B C D Qty Specification Revision Sheet 2 of 3 DH2280 DH8950 DH1364 90-0061 90-0055 90-0064 1000 750 250 Customer Packaging Specifications For Print Distribution to Customers Series DH SERIES B A A SECTION A-A T f1.5+1.0 U F W 4.0±0.1 V PACKAGING NOTE: Only pressure sensitive cover tape is to be used. A 2 13 0.5 1.0 2 0.5 21 0.8 C 1 B 1 D 0.5 A MAX. C MAX. D MAX. B MIN. Dimensions are in millimeters unless specified. B B B B B B B B B B B

Item Specification Test Method/Condition Environmental Static Humidity After exposure part remains within specified electrical parameters for L, Q and DCR. Storage Life After exposure part remains within specified electrical parameters for L, Q and DCR. Temperature Cycle After exposure part remains within 10 cycles (Air to Air) 1 cycle shall consist of: specified electrical parameters for 30 minutes exposure to +85°C L, Q and DCR. 30 minutes exposure to -40°C Allow 20 minutes transition between extremes. Temperature Shock After exposure part remains within 10 cycles (Air to Air) 1 cycle shall consist of: specified electrical parameters for 30 minutes exposure to -55°C L, Q and DCR. 30 minutes exposure to +125°C 15 seconds maximum transition between temperatures General Storage Temperature Range -40°C to +85°C Operating Temperature Range -40°C to +85°C Flammability IEC 695-2-2 Withstands needle-flame test Other Vibration After exposure part remains within 1 cycle of 30 minutes of the following: specified electrical parameters for 5 - 7 Hz constant displacement of 0.75 inches, 5 minutes L, Q and DCR. 7 - 30 Hz constant acceleration of 1.5 Gs, 10 minutes 31 - 50 Hz constant displacement of 0.33 inches, 5 minutes 50 - 500 Hz constant acceleration of 1.2 Gs, 10 minutes Mechanical Shock After exposure part remains within DH8950 Series - 2000 Gs per axis, 2 directions specified electrical parameters for DH1364 Series - 500 Gs per axis, 2 directions L, Q and DCR. DH2280 Series - 500 Gs per axis, 2 directions Solderability Wetting shall cover 90% minimum of each termination Dip pads in RMA flux, 63/37 solder (Sn/Pb) at 232°C for 5 seconds ±2 seconds. Component Adhesion (Push Test) Component shall withstand 6 lb. push force minimum without delaminating from mounting surface. Apply and measure force with a digital force gauge set. Resistance to Solvent Withstands 6 minutes of alcohol. Withstands 3 minutes forced spray Freon TMS Chemical Ionic Contamination Conductivity: 11 µOhms/cm maximum pH: 5.5 to 9 Chlorides: 65 ppm maximum Sodium: 20 ppm maximum Potassium: 10 ppm maximum Series Revision Sheet 3 of 3 Subject parts to an environment of 85°C 85% R.H. for 168 hours. After exposure allow parts to dry for 4 hours before measurements are taken. Precondition at 25°C for 60 minutes. Expose parts to an environment of +40°C with 90 to 95% R.H. for 240 hours. DH SERIES BFor Print Distribution to Customers