DH30B-17S

DH40-27S HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 13

Technical content

■Overview DH Series is an impedance controlled interface connector for high speed transmission. With a contact pitch of 1mm, the DH Series has a compact and thin design, enabling higher density mounting compared to generic half-pitch connectors. 4 different lock styles are available to meet various application needs. ■Features 1. Small Design With a contact pitch of 1mm and mounted pitch of 0.5mm, the mating face area is reduced by approximately 50% when compared to existing Hirose half-pitch connectors. (Fig.1) 2. Robust Design The D-shaped shell design enhances prying force. Through-hole mounting of the shell and retention tabs increases PCB retention force. 3. Unique Contact Arrangement for IDC Termination The stagerred 2 row IDC contact arrangement reduces plug size. Additionally, the 2 types of press plates, white and black, can be used to prevent mis-wiring. 4. Excellent Shielding for EMI Prevention The plug is covered with a metal shield and the ground can be dropped to the panel or board. (Fig. 2) 5. Wide Variation Wide product range available including screw lock types, one touch lock types and variations to accommodate an array of panel thicknesses. 6. Applicable for High Speed Data Transmission Twinaxial cabling enables high speed transmission. (Varies based on cable length and board) Mating Face Area Approximately 50% Reduced Grounding Structure Panel Metal Shielding PCB Fig.2 2021.4ᶅ Fig.1 DH Series High Speed Transmission, 1mm Pitch Small Interface Connector In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information.

DH Series●High Speed Transmission, 1mm Pitch Small Interface Connector 500Mbps (Cable:10m) 1Gbps (Cable:5m) 2.5Gbps (Cable:2m) Pair B G- S-S -G Pair A G- S-S -G Pair A Pulse Pattern Generator Oscilloscope Pair B

• Measurement Pair : Deferential Pair A
• Cable : Twinax Cable
• Input Signal Voltage : 500mV G : Ground S : Signal Measurement Method Eye Diagram [CH1-CH2 ] Cable Length Pin Assignment Measurement Method High Speed Data Transmission This data is for reference only. Data may differ based on the cable or PCB used in evaluation.

■Materials Products Components Material Finish Remarks Screw Lock Type Receptacle Connector (DH60-P / DH80-P) Insulator Polyamide Resin Black UL94V-0 Contacts Copper Alloy Partially Gold Plated --- Shell Stainless Steel Tin Plated --- Retention Tab Stainless Steel Partially Tin Plated --- One Touch Lock Type Receptacle Connector (DH60A-P / DH80A-P) Insulator Polyamide Resin Black UL94V-0 Contacts Copper Alloy Partially Gold Plated --- Shell Stainless Steel Tin Plated --- Retention Tab Brass Tin Plated --- Metal Grounding Post Steel Nickel Plated --- Plug Connector (DH3*B-S) Insulator Polyamide Resin Black UL94V-0 Contacts Copper Alloy Partially Gold Plated --- Rear Insert PBT Resin Black, Natural UL94V-0 Shell Stainless Steel Nickel Plated --- Plug Connector (DH40-S) Insulator : Polyamide Resin Re ar Insert : Polyamide Resin Contact : Copper Alloy Shell : Stainless Steel Screw Lock Type Cover Case (DH--CV1B) Cover Polycarbonate Resin Black UL94V-0 Shield Stainless Steel Nickel Plated --- Screw Lock Steel Nickel Plated --- Tapping Screw Steel Black Chromate(Cr+3) --- Hand-screw Lock Type Cover Case (DH--CV2B) Cover Polycarbonate Resin Black UL94V-0 Shield Stainless Steel Nickel Plated --- Screw Lock Steel Nickel Plated --- Screw Insulator Polyamide Resin Black UL94V-0 Tapping Screw Steel Black Chromate(Cr+3) --- One Touch Lock Type Metal Button Cover Case (DH--CT1B) Cover Polycarbonate Resin Black UL94V-0 Shield Stainless Steel Nickel Plated --- Lock Spring Stainless Steel --- --- Tapping Screw Steel Black Chromate(Cr+3) --- One Touch Lock Type Plastic Button Cover Case (DH--CT2B) Cover Polycarbonate Resin Black UL94V-0 Shield Stainless Steel Nickel Plated --- Lock Spring Stainless Steel --- --- Button Polycarbonate Resin Black UL94V-0 Tapping Screw Steel Black Chromate(Cr+3) --- Lock Screw (DH-LNA*) Screw Lock Steel Nickel Plated --- Washer Steel Nickel Plated --- Spring Washer Steel Nickel Plated --- Metal Clamp (DH-CMB()) Metal Clamp Brass --- --- DH Series●High Speed Transmission, 1mm Pitch Small Interface Connector ■Specifications Ratings Rated Current 0.5A Operating Temperature –25ç to +85ç Rated Voltage 125V AC Storage Temperature –25ç to +60ç Item Specification Conditions 1.Contact Resistance 1 50mø max. (IDC type) 65mø max. (Solder type) 100mA (DC or 1,000Hz) 2.Insulation Resistance 1000Mø Min. 100V DC 3.Withstanding Voltage No flashover or insulation breakdown 250V AC per min. 4. Insertion and Withdrawal Force Measured with applicable connector. 5.Mating Durability 1 ᶃContact resistance : 70mø Max. (IDC type) 85mø Max. (Solder type) ᶄNo damage, cracks or parts dislocation. 1000 cycles 6.Vibration ᶃNo electrical discontinuity of 10µs or longer. ᶄNo damage, cracks or parts dislocation. Frequency : 10 to 50Hz, single amplitude of 0.75mm, 5min/cycle, total 10 cycles. 7.Shock Acceleration of 490m/s2, 11ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis. 8.Temperature Cycles 1 ᶃContact resistance : 70mø Max. (IDC type) 85mø Max. (Solder type) ᶄNo damage, cracks or parts dislocation. Temperature : -55ç /+5ç to +35ç /+85ç /5ç to+35ç Time : 30/5/30/5(Minutes) 5cycles 9.Humidity (Steady State) ᶃInsulation resistance : 100Mø Min. ᶄNo damage, cracks or parts dislocation. 96 hours at 40ç And RH 90% to 95%. 10.Salt Spray Test No heavy corrosion resulting in a loss of function. ɹ 5% salt water solution for 48 hours. 1 Excludes wire conductor resistance. *Unless otherwise specified, refer to JIS C 5402 17pos. 27pos. 37pos. 51pos.

■Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders.

• Receptacle DH 60 − 27 P ⁞ ⁡ ⁢
• Plug DH 30 B − 27 S ⁞ ⁣ ⁡ ⁢
• Cover Case DH − 27 − CV1 − B ⁞⁡ ⁤⁣ ⁞Series Name DH Termination Style 3 ˞ IDC Type Solder Type Right Angle SMT Straight SMT ⁠Lock Style Blank A Screw Lock Type One Touch Lock Type ⁡No. of Pos. 17, 27, 37, 51 ⁢Contact Gender P S Female Type Male Type ⁣Serial No. ⁤Cover Type CV1 CV2 CT1 CT2 Screw Lock Type (Locked with screwdriver) Screw Lock Type (Hand-screw) One Touch Lock Type One Touch Lock Type (Plastic Button) ⁥Lock Screw LNA ⁦Panel Thickness Blank ɹ W4 ɹ W8 ɹ W16 1.4 to 1.6 0.9 to 1.2 0.5 to 0.8 No Panel ⤒Metal Clamp CM ■Functionality Diagram
• Lock Screw DH − LNA − W16 ⁞⁥ ⁦
• Metal Clamp DH − 27 − CM B (7.3) ˔Metal Clamp ˔Screwdriver Locking Type ˔Hand-screw Type ˔IDC Plug ˔Manual Solder Plug ˔Lock Screw ˔Right Angle Receptacle ˔Straight Receptacle DH Screw Lock Type ˔Metal Clamp ˔Metal Button ˔Plastic Button ˔IDC Plug ˔Manual Solder Plug ˔Right Angle Receptacle ˔Straight Receptacle DH One Touch Lock Type DH Series●High Speed Transmission, 1mm Pitch Small Interface Connector

■Receptacle Connector ■Lock Screw

• Right Angle Type
• Straight Type Contact No. I Contact No. GContact No.1 Contact No. H ʢØ1ʣ E D 4.8 ʢ0.9ʣ 1.6 C F 1.1 4 ʢ8ʣ A B 0.5 0.5 1.56 Ø2.3×0.4 M2.3×0.4 Contact No.1 Contact No.14 Contact No.15 Contact No.27 ʢ1.5ʣ 2.4 ʢ24.2ʣ 2.75 ʢ1.5ʣØ1 4.4 27.8 16.5 4.9 4.6 6.5 30.8 Part No. HRS No. No. of Pos. A B C D E F G H I Remarks DH60-17P 244-0006-8 00 17 25 8 (19.2) 19 19.2 24.8 9 10 17 − DH60-27P 244-0001-4 00 27 30 13 (24.2) 24 24.2 29.8 14 15 27 − DH60-37P 244-0007-0 00 37 35 18 (29.2) 29 29.2 34.8 19 20 37 − DH80-27P 244-0051-2 00 27 − Screw Lock Type DH60-27P DH80-27P DH-LNA DH-LNA-W4 M2.3∞0.4 M2∞0.4 ʢ14.4ʣ 4.4 2.5 ʢØ3.6 ʣ M2.3∞0.4 M2∞0.4 0.4 ʢ14.4ʣ 4.4 2.5 ʢØ3.6 ʣ DH-LNA-W8 DH-LNA-W16 M2.3∞0.4 M2∞0.4 0.8 ʢ14.4ʣ 4.4 2.5 ʢØ3.6 ʣ M2.3∞0.4 M2∞0.4 1.6 2.5 4.4 ʢ14.4ʣ ʢØ3.6 ʣ Part No. HRS No. Applicable Panel Thickness (mm) Remarks DH-LNA 244-0045-0 00 1.4 to 1.6 − DH-LNA-W4 244-0046-2 00 0.9 to 1.2 − DH-LNA-W8 244-0004-2 00 0.5 to 0.8 − DH-LNA-W16 244-0005-5 00 − No Panel DH Series●High Speed Transmission, 1mm Pitch Small Interface Connector

■Cover Case

• Screw Lock (Used with Screwdriver)
• Screw Lock (Hand-screw) 11.7 C B ʢ25.4ʣ ØA 11.7 C B ʢ25.4ʣ ØA Part No. HRS No. No. of Pos. A B C Remarks DH-17-CV1B 244-0009-6 00 17 (7.8) 31.4 26 Cable Outer Diameter 5.1 to 7.1mm DH-27-CV1B 244-0010-5 00 27 (8.8) 31.4 31 Cable Outer Diameter 6.6 to 7.8mm DH-37-CV1B 244-0011-8 00 37 (10.3) 39 36 Cable Outer Diameter 7.3 to 9.3mm DH-17-CV2B 244-0013-3 00 17 (7.8) 31.4 26 Cable Outer Diameter 5.1 to 7.1mm DH-27-CV2B 244-0014-6 00 27 (8.8) 31.4 31 Cable Outer Diameter 6.6 to 7.8mm DH-37-CV2B 244-0015-9 00 37 (10.3) 39 36 Cable Outer Diameter 7.3 to 9.3mm DH-51-CV2B 244-0016-1 00 51 (11.1) 39 43 Cable Outer Diameter 8.5 to 10.1mm DH-27-CV1B DH-27-CV2B DH Series●High Speed Transmission, 1mm Pitch Small Interface Connector

M2×0.4 Contact ̣̾ɽH Contact ̣̾ɽ I Contact ̣̾ɽ̍ Contact ̣̾ɽJE ʢ0.7ʣ ʢ1.56ʣ F ʢ0.9ʣ G ʢ0.95ʣ D 4 C A B 0.5 4.81.6 85.2 Part No. HRS No. No. of Pos. A B C D E F G H I J Remarks DH60A-27P

• Straight Type M2×0.4 Contact No.1 Contact No.F Contact No.G Contact No.H ʢ1.5ʣ 2.4 E 2.75 ʢ1.5ʣØ1 4.4 A C 4.9 4.6 6.5 D B ʢ1ʣ 2.45 Part No. HRS No. No. of Pos. A B C D E F G H Remarks DH80A-27P ■Receptacle Connector
• Right Angle Type One Touch Lock Type DH Series●High Speed Transmission, 1mm Pitch Small Interface Connector

• Plastic Button Type C B ʢ17ʣ 11.7 ØA 11.7 ʢ17ʣ B C ØA Part No. HRS No. No. of Pos. A B C Remarks DH-17-CT1B 244-0039-7 00 17 (7.8) 31.4 26 Cable Outer Diameter 5.1 to 7.1mm DH-27-CT1B 244-0030-2 00 27 (8.8) 31.4 31 Cable Outer Diameter 6.6 to 7.8mm DH-37-CT1B 244-0041-9 00 37 (10.3) 39 36 Cable Outer Diameter 7.3 to 9.3mm DH-17-CT2B 244-0047-5 00 17 (7.8) 31.4 26 Cable Outer Diameter 5.1 to 7.1mm DH-27-CT2B 244-0048-8 00 27 (8.8) 31.4 31 Cable Outer Diameter 6.6 to 7.8mm DH-37-CT2B 244-0049-0 00 37 (10.3) 39 36 Cable Outer Diameter 7.3 to 9.3mm DH-51-CT2B 244-0050-0 00 51 (11.1) 39 43 Cable Outer Diameter 8.5 to 10.1mm DH-27-CT1B DH-27-CT2B
• Metal Button Type ■Cover Case DH Series●High Speed Transmission, 1mm Pitch Small Interface Connector

Contact No.F Contact No.E Contact No.G Contact No.1 D 6.18 3.9 D 6.18 3.9 ʢ6.65ʣ ʢ8.2ʣ ʢ16.02ʣ C ʢ9.55ʣ ʢ0.5ʣ ʢ1ʣ B A Part No. HRS No. No. of Pos. A B C D E F G Remarks DH30B-17S 244-0017-4 00 17 (14.8) (8) (7) (11) 9 10 17 Conductor Size : 28 AWG Insulator Outer Diameter : Ø0.9±0.04 DH30B-27S 244-0018-7 00 27 (19.8) (13) (12) (16) 14 15 27 DH30B-37S 244-0019-0 00 37 (24.8) (18) (17) (21) 19 20 37 DH30B-51S 244-0020-9 00 51 (31.8) (25) (24) (28) 26 27 51 DH32B-17S 244-0021-1 00 17 (14.8) (8) (7) (11) 9 10 17 Conductor Size : 28 AWG Insulator Outer Diameter : Ø0.66±0.04 DH32B-27S 244-0022-4 00 27 (19.8) (13) (12) (16) 14 15 27 DH32B-37S 244-0023-7 00 37 (24.8) (18) (17) (21) 19 20 37 DH32B-51S 244-0024-0 00 51 (31.8) (25) (24) (28) 26 27 51 DH30B-27S ■Metal Clamp ʦ27pos.ɿDH-27-CMBʢ6.9ʣʧ (Cable Outer Diameter 6.9mm) A 4.7 B C RE RF D Part No. HRS No. ABCDEF Remarks

• Solder Contact Type Contact No.1Contact No.D Contact No.F Contact No.E Contact No.1 Contact No.D Contact No.E Contact No.F ̙̝̐̌ ʢ1ʣ ʢ0.5ʣ B C A 6.65 9.55 ʢ8.2ʣ ʢ15.7ʣ Part No. HRS No. No. of Pos. A B C D E F Remarks DH40-17S 244 0054-0 00 17 (14.8) (8) (7) 9 10 17 − DH40-27S 244 0053-8 00 27 (19.8) (13) (12) 14 15 27 − DH40-37S 244 0055-3 00 37 (24.8) (18) (17) 19 20 37 − DH40-51S 244 0056-6 00 51 (31.8) (25) (24) 26 27 51 − DH40-27S
• IDC Type ■Plug Unit DH Series●High Speed Transmission, 1mm Pitch Small Interface Connector

0.43 16.5 24.2 27.8 3.6 4.4 7.4 0.65(TH) 1.25(Land) 2.75 2.6(Land) 2(TH) No.15 No.27 No.14Pad for Shell Pad for TerminalNo.1 No.2 No.13 No.26 No.16 Ø1.1( Hole Ø3.2(Land) Ø2.6( TH Positioning Hole 0.43 16.5 21.3 27.8 3.6 4.4 7.4 0.65(TH) 1.25(Land) 2.75 2.6(Land) 2(TH) No.26No.16 No.2 No.13 No.1 No.14 No.15 No.27Ø1.1( Hole Ø2.4(Land) Ø1.8( TH Pad for Shell Pad for Terminal Positioning Hole No.1 No.(N+1)/2 No.(N+3)/2 No.2 No.(N+5)/2 No.N No.(N-1)/2 No.(N-1) *N:Number of positions D BRecommended PCB Layout BBoard Pattern Contact No. ɿ Pattern Prohibited Area Positioning Hole Pad for Terminal Pad for Shell PCB End 2-1ʢLandʣ 2-1.5ʢLandʣ 2-ʢ2ʣʢLandʣ 2-ʢ1.65ʣʢLandʣ 2-0.65ʢTHʣ 2-ʢ3.55ʣʢLandʣ 2-2.55ʢTHʣ 0.15 E 3.1 1.2 2.9 D 2.5 P=0.5 0.3 C ʢ ʣ ʢ ʣ ʢR0.325 ʣ 2-Ø1.1 ʢHole ʣ 2-Ø1.4 ʢTH ʣ ʢ R0.825 ʣ ˔%)ˎˎ1ɺ%)"ˎˎ1 ˔%)1 ˔%)"1 ˔%)ˎˎ1ɺ%)"ˎˎ1 Unit : mm Part No. A B C D E DH60-17P DH60A-17P 24.8 19.2 8 19 26 DH60-27P DH60A-27P 29.8 24.2 13 24 31 DH60-37P DH60A-37P 34.8 29.2 18 29 36 DH60-51P DH60A-51P 41.8 36.2 25 36 43 DH Series●High Speed Transmission, 1mm Pitch Small Interface Connector

■Panel Cutout

• Screw Lock Type Panel PCB Mounting Surface Panel Backside PCB *Lock Screw (DH-LNA) 24.2 2.5 4.8 *Panel t=1.6PCB t=1.6 8 Reference Panel Cutout (Right Angle Type, Straight Type) (The dimensions are specified based on the center of the connector interface) Connector Mounted on PCB (For example, panel thickness is 1.6mm) *The drawing features DH60-27P as the example. 4.6 30.8 24.2 4.9 Reference Cutout Panel PCB Mounting Surface Panel Backside PCB Panel *Panel t=1.6 PCB t=1.6 *DH80-27P A 19.2 24.2 29.2 36.2 No. of Pos. B 13.7 18.7 23.7 30.7 C D A·B·C·D Dimension Table Unit : mm *Select a lock screw from the below table based on panel thickness. PCB Mounting Surface PCB Mounting Surface 2.9 2.5 B A 2.5 D C 2-R1.1 Ø2.5 DH-LNA(CL244-0045-0-00) DH-LNA-W4(CL244-0046-2-00) DH-LNA-W8(CL244-0004-2-00) DH-LNA-W16(CL244-0005-5-00) *Please set piercing R as less than R1. *Please set piercing R as less than R1. Part No. HRS No. Applicable Panel Thickness (mm) DH-LNA 244-0045-0 00 1.4 to 1.6 DH-LNA-W4 244-0046-2 00 0.9 to 1.2 DH-LNA-W8 244-0004-2 00 0.5 to 0.8 DH-LNA-W16 244-0005-5 00 No panel *The recommended screw tightening torque is from 0.12 to 0.3 N·m. DH Series●High Speed Transmission, 1mm Pitch Small Interface Connector

A·B Dimension Table Unit : mm DH Series●High Speed Transmission, 1mm Pitch Small Interface Connector

• One Touch Lock Type PCB Mounting Surface B A 2.5 2.4 2-R1.1 M2∞0.4∞10 *Screw for Installation *1 Installation with the panel must use a dedicated screw. Purchase : qHRS Part No.[DH60A-SCREW] HRS No.[CL244-0042-1] wNITTOSEIKO Co., Ltd. [FINE PAN HEAD MACHINE SCREW 2 TYPES] 0.6 Ø3.5 PCB Panel Backside Panel *1 Screw for Installation 4.8 2.5 30.8 26.2 8t=1.6 Max. 8.45.1PCB t=1.6 PCB Mounting Surface Reference Panel Cutout (Right Angle Type, Straight Type) (The dimensions are specified based on the center of the connector interface) Connector mounted on PCB *The drawing features DH60A-27P as the example. 4.6 30.8 26.2 t=1.64.9t=1.6 Max. 0.6Ø3.5 PCB PCB Panel Backside *2 Screw for Installation Panel PCB Mounting Surface *Screw for Installation *2 Installation with the panel must use a dedicated screw. Purchase : qHRS Part No.[DH80A-SCREW] HRS No.[CL244-0059-4] wNITTOSEIKO Co., Ltd. [FINE PAN HEAD MACHINE SCREW 2 TYPES] M2∞0.4∞5 0.6 Ø3.5 *DH80A-27P A 23.5 28.5 33.5 40.5 No. of Pos. B *Please set the draft R for process as max R1.

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN https://www.hirose.com/ ■Applicable Tools Process Part No. HRS No.

1 Cable End Processing Manual Work

2 Upper Level Wire Arranging

Tool for Wire Arrangement : DH/CA-MO 902-2183-03 Upper Level Press Fitting

4 Lower Level Wire Arranging

5 Lower Level Press Fitting

6 Cable Cutting Manual Work (Using nippers, etc.)

7 IDC

ᶃ IDC/Clamping Tool : DH/IDCK-MP 902-2185-5 ᶄ Attachment for 17pos : DH-17UNIT 902-2186-8 Attachment for 27pos : DH-27UNIT 902-2187-0 Attachment for 37pos : DH-37UNIT 902-2188-3 Attachment for 51pos : DH-51UNIT 902-2189-6 ᶅ HI-FLEX Termination Press (Select appropriate attachment of each pin count from ᶄ.) 550-0082-2 8C a b l e C l a m p i n g ᶃIDC/Clamping Tool : DH/IDCK-MP 902-2185-5 ᶄ Attachment for DH-17-CMB(5.6) : DH-17-CMB(5.6)UNIT 902-2197-4 Attachment for DH-17-CMB(6.3) : DH-17-CMB(6.3)UNIT 902-2190-5 Attachment for DH-17-CMB(6.6) : DH-17-CMB(6.6)UNIT 902-2196-1 Attachment for DH-27-CMB(6.9) : DH-27-CMB(6.9)UNIT 902-2194-6 attachment for DH-27-CMB(7.3) : DH-27-CMB(7.3)UNIT 902-2191-8 Attachment for DH-37-CMB(7.8) : DH-37-CMB(7.8)UNIT 902-2198-7 Attachment for DH-37-CMB(8.8) : DH-37-CMB(8.8)UNIT 902-2192-0 Attachment for DH-51-CMB(9.0) : DH-51-CMB(9.0)UNIT 902-2199-0 Attachment for DH-51-CMB(9.6) : DH-51-CMB(9.6)UNIT 902-2193-3 ᶅ HI-FLEX Termination Press (Select appropriate attachment of each pin count from ᶄ.) 550-0082-2 9 Cover Attaching Manual Work (Using torque drivers, etc.) *For 7. IDC and 8. Cable clamping, one of the tools listed in each ᶃ, ᶄ, and ᶅ are required (select one). *Customers that already have the HI-Flex termination press may use it for product assembly. *DH/IDCK-MP listed in 7. IDC and 8. Cable clamping is the same tool. If there is at least one, then both IDC and cable clamping can be completed by switching out the IDC attachment with the caulking attachment. Accordingly, two of both DH/ IDCK-MP and the HIFLEX termination press are required for mass production. DH Series●High Speed Transmission, 1mm Pitch Small Interface Connector The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 04/2021. Contents are subject to change without notice for the purpose of improvements.