Datasheet-DH15W10
Document overview
- PDF pages: 7
Technical content
Features
⚫ Efficiency Up to 86% ⚫ Regulated Outputs ⚫ Fully Protected (OCP/OVP/UVLO) ⚫ 4000Vac I/O Isolation ⚫ Operating Temperature -40 to +80℃ ⚫ UL 1741, CSA-C22.2 No.107.1, EN62109-1 Approval ⚫ Shock & Vibration MIL-STD-810F Compliant ⚫ 5000m Operating Altitude ⚫ Input Reverse Polarity Protection MODEL NUMBER INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT INPUT CURRENT % EFF. CAPACITOR LOAD MAX. MIN. MAX. NO LOAD FULL LOAD (1) DH15W10-800S05 150-1500 VDC 5 VDC 0 mA 2.00 A 0.5 mA 17 mA 73.5 2000uF DH15W10-800S12 150-1500 VDC 12 VDC 0 mA 1.25 A 0.5 mA 23 mA 81.5 1250uF DH15W10-800S15 150-1500 VDC 15 VDC 0 mA 1.00 A 0.5 mA 23 mA 83 1000uF DH15W10-800S24 150-1500 VDC 24 VDC 0 mA 0.625 A 0.5 mA 22 mA 86 625uF NOTE: 1. Nominal input voltage 800 Vdc. 2. Measured at nominal input voltage. PART NUMBER Series Nominal Input Voltage Number of Outputs Nominal Output Voltage Installation Type DH15W10- II O XX Y DH15W10 800：800 VDC S： Single 05： 05VDC P： PCB Mount 12： 12VDC ST： Screw Terminal 15： 15VDC DR： DIN Rail 24： 24VDC Part Number Example: DH15W10-800S12P: 15W, 10:1 150-1500Vdc Input, Single 12Vdc Output, PCB Mounting
www.cincon.com 2 REVISION: February 2025, V11 DH15W10 Series TECHNICAL SPECIFICATIONS (All specifications are typical at nominal input, full load at 25℃ unless otherwise noted.) ABSOLUTE MAXIMUM RATINGS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Input Voltage Continuous All -1500 1500 Vdc Operating Temperature With de-rating, above 50℃ All -40 80 ℃ Storage Temperature All -40 85 ℃ INPUT CHARACTERISTICS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Operating Input Voltage All 150 800 1500 Vdc Input Under Voltage Lockout Turn-On Voltage Threshold Full load All 125 140 147 Vdc Turn-Off Voltage Threshold Full load All 112 130 137 Vdc Lockout Hysteresis Voltage Full load All 10 Vdc Maximum Input Current Vin=150V, Full load 5Vo 0.088 A Others 0.12 No-Load Input Current Vin=800V, Io=0A See Model Number Table mA Input Filter Capacitive All Inrush Current Vin=800Vdc, Cold start at 25℃ All 65 150 A OUTPUT CHARACTERISTICS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Voltage Set Point Accuracy Vin=800V, Full load, Tc=25℃ All -2.0 +2.0 % Output Voltage Regulation Load Regulation Full load to no load All ±1.0 % Line Regulation Vin=High line to low line, full load All ±1.0 % Temperature Coefficient Tc=-40°C to 80°C All ±0.15 %/℃ Output Voltage Ripple and Noise (5Hz to 20MHz bandwidth) Peak-to-Peak Full load, 10uF aluminum capacitor and 0.1uF ceramic capacitor 5Vo 100 mV 12Vo 120 15Vo 150 24Vo 150 Output Current Range Vin= 150 to 1500V See Model Number Table A Over Current Protection Hiccup mode. Auto recovery All 110 300 % Short Circuit Protection All Continuous, Auto Recovery External Load Capacitance Full load (Constant resistive load) See Model Number Table uF Over Voltage Protection IC component to clamp (auto recovery) 5Vo 8 Vdc 12Vo 16 15Vo 19 24Vo 30 EFFICIENCY PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units 100% Load Vin=800V, Full load See Model Number Table % DYNAMIC CHARACTERISTICS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Output Voltage Current Transient Error Band 75% to 100% of I o_max. step load change di/dt=0.1A/us (within 1% Vout nominal) All ±5 % Recovery Time All 250 us
www.cincon.com 3 REVISION: February 2025, V11 DH15W10 Series PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Turn-On Delay and Rise Time Full load (Constant resistive load) Turn-On Delay Time, From Input Vin_min. to 10%Vo_set, Power up All 200 ms Output Voltage Rise Time 10%Vo_set to 90%Vo_set All 8 ms ISOLATION CHARACTERISTICS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Isolation Voltage (100% Factory Hi-Pot Tested @2sec.) 1 Minute; input to output All
4000 Vac
5656 Vdc
Isolation Resistance Input to output All 100 MΩ Isolation Capacitance Input to output All 1100 pF FEATURE CHARACTERISTICS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Switching Frequency Pulse width modulation (PWM) (Vin =150Vdc-1500Vdc, Full load) All 25 75.6 KHz GENERAL SPECIFICATIONS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units MTBF Io=100% of Io_max.; MIL-HDBK - 217F_Notice 1, GB, 25℃ All 300 K hours Weight Pin out package (DH15W10-800SXXP) All 170 grams Lock screw wiring (DH15W10-800SXXST) 210 Lock screw wiring+track (DH15W10-800SXXDR) 215 Case Material Plastic, PBT, UL 94V-0 Base Plate Material Non-Conductive Base Potting Material UL 94V-0 Pin Material Base: Copper Plating: Nickel with Matte Tin Shock/Vibration MIL-STD-810F Humidity 95% RH max. Non condensing Altitude 5000m Operating altitude, 12000m Transport altitude Thermal Shock MIL-STD-810F EMC SPECIFICATIONS (External components required, please refer to application note.) EMI Meets EN 55032 Compliant (with external filter) Class A ESD EN 61000-4-2 Level 3: Air ±8kV, Contact ± 4kV Perf. Criteria A Radiated Immunity EN 61000-4-3 Level 3: 80~1000MHz, 10V/m Perf. Criteria A Fast Transient EN 61000-4-4 Level 3: On power input port, ±2kV, external input capacitor required Perf. Criteria A Surge EN 61000-4-5 Level 4: Line to line, ±2kV (with external components) Perf. Criteria A Conducted Immunity EN 61000-4-6 Level 3: 0.15~80MHz, 10V Perf. Criteria A Power Frequency Magnetic Field Immunity EN 61000-4-8 50/60Hz, 3A/m (r.m.s.) Perf. Criteria A
www.cincon.com 4 REVISION: February 2025, V11 DH15W10 Series CHARACTERISTIC CURVE Power Derating Curve Performance Data 20% 40% 60% 80% 100% -40 -20 0 20 40 60 80 100 Output Power (%) Ambient Temperature (℃) DH15W10 Derating Curve (Vin=800V) 20LFM(Natural Convection) 45% 50% 55% 60% 65% 70% 75% 80% 85% 90% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Efficiency (%) Current Load (%) DH15W10-800S05 Eff Vs Io @25 Deg. C 150V 800V 1500V Power Dissipation (W) Output Power (%) DH15W10-800S05 Pd Vs Po @25 Deg. C 150V 800V 1500V 45% 50% 55% 60% 65% 70% 75% 80% 85% 90% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Efficiency (%) Current Load (%) DH15W10-800S12 Eff Vs Io @25 Deg. C 150V 800V 1500V Power Dissipation (W) Output Power (%) DH15W10-800S12 Pd Vs Po @25 Deg. C 150V 800V 1500V
www.cincon.com 5 REVISION: February 2025, V11 DH15W10 Series 45% 50% 55% 60% 65% 70% 75% 80% 85% 90% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Efficiency (%) Current Load (%) DH15W10-800S15 Eff Vs Io @25 Deg. C 150V 800V 1500V Power Dissipation (W) Output Power (%) DH15W10-800S15 Pd Vs Po @25 Deg. C 150V 800V 1500V 45% 50% 55% 60% 65% 70% 75% 80% 85% 90% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Efficiency (%) Current Load (%) DH15W10-800S24 Eff Vs Io @25 Deg. C 150V 800V 1500V Power Dissipation (W) Output Power (%) DH15W10-800S24 Pd Vs Po @25 Deg. C 150V 800V 1500V
www.cincon.com 6 REVISION: February 2025, V11 DH15W10 Series MECHANICAL SPECIFICATION DH15W10-800SXXP DH15W10-800SXXST
sales@cincon.com www.cincon.com