DGP30W GULFSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Rev.A1 www.gulfsemi.com DGP30W DAMPER SINTERED GLASS JUNCTION PLASTIC RECTIFIER VOLTAGE:1500V CURRENT: 3.0A FEATURE DO-201AD Specially designed for clamping circuits, horizontal deflection systems and damper applications High temperature metallurgically bonded construction 3.0 ampere operation at Ta=50 ℃ with no thermal runaway Sintered glass cavity free junction Capable of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 350 °C /10sec/0.375”lead length at 5 lbs tension Operate at Ta =55 °C with no thermal run away Typical Ir<0.1 µA MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25 °C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL DGP30W units Maximum Recurrent Peak Reverse Voltage Vrrm 1500 V Maximum RMS Voltage Vrms 1050 V Maximum DC blocking Voltage Vdc 1500 V Maximum Average Forward Rectified Current 3/8”lead length at Ta =50℃ If(av) 3.0 A Peak Forward Surge Current 8.3ms single Half sine- wave superimposed on rated load at Ta=50 ℃ Ifsm 100.0 A Maximum Instantaneous Forward Voltage at 3.0A Vf 1.2 V Maximum full load reverse current full cycle average 0.375”(9.5mm) lead length at Ta=70 ℃ Ir(av) 200.0 µA Maximum DC Reverse Current Ta =25 ℃ at rated DC blocking voltage Ta =100 ℃ Ir 5.0 100.0 µA Typical Reverse Recovery Time (Note 1) Trr 1.0 µS Typical Junction Capacitance (Note 2) Cj 40.0 pF Typical Thermal Resistance (Note 3) Rth(ja) 20.0 ℃/W Storage and Operating Junction Temperature Tstg, Tj -65 to +1 75 ℃ Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 0.375”(9.5mm) lead length, with leads attached to heat sink
Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES DGP30W