DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
DG12 IP40 Power Entry Module SCHURTER Configuration Code DG12-CBDWMXXXC0-000-C6135-XXX-10X0-00 Type DG12 IP40 Product group Power Entry Modules with filter Business unit Connectors Weight range ca. 104g Part complies with EU RoHS directive: Yes Exemption 6(c) - Copper alloy containing up to 4% lead by weight Fluctuation margin n/a Part complies with China RoHS directive: No Part complies with IEC definition of halogen free products: No Company SCHURTER AG Important remarks: 1) Traces are product parts, substances etc. that are below a percentage of 0.1 % (1000ppm) by weight. Higher limits are accepted if the substance or material is legally regulated (see note no. 2). 2) REACH legislation, annex XVII contains a list of legal restrictions on substances or materials and is available at http://echa.europa.eu/candidate-list-table 3) Substances, materials etc. with possible harmful effects on human beings and the environment are listed. 4) There are no risks for human beings and to the environment if products are properly used as designated. This shall not apply to risks caused during procedures for disposal etc. 5) All statements herein are based on our present knowledge. If our products are used properly, there are no risks to human beings and/or the environment. Address Werkhofstrasse 8-12 CH-6002 Luzern, Switzerland E-mail substances@schurter.ch Internet www.schurter.com Certified Management Systems ISO 9001 since 1990 ISO 14001 since 1996 OHSAS 18001 since 2005 ISO 50001 since 2014 This Product Content Sheet has been established according to Umbrella Specs, an initiative of the German Electrical and Electronic Manufacturer’s Association (ZVEI). Reference: http://www.zvei.org/fachverbaende/electronic_components_and_systems/material_content_data Composition part Material group Materials CAS if applicable Average mass [weight-%] Sum [%] Traces Plastic parts Thermoplastic Polyamide 6 PA6 25038-54-4 3.65 36.05 Polyamide 66/6 PA66/6 24993-04-2 17.55 Polycarbonate PC 25766-59-0 1.15 Polyethylene terephthalate PET 25038-59-9 0.10 Polypropylene PP 9003-07-0 0.85 Polyphtalamide PPA n/a 12.70 Polystyrene PS 9003-53-6 0.05 Thermoset Unsaturated polyester UP n/a 1.60 1.60 Metal parts Silver Ag 7440-22-4 0.15 58.05 Copper Cu 7440-50-8 17.85 Chromium Cr 7440-47-3 0.05 Iron Fe 7439-89-6 31.40 Nickel Ni 7440-02-0 0.55 Lead Pb 7439-92-1 0.05 Exemption Tin Sn 7440-31-5 0.95 Zinc Zn 7440-66-6 6.35 Manganese Mn 7439-96-5 0.70 Other parts Ceramic n/a 0.55 4.30 Ferrite n/a 3.75 Sum in total: 100 DG12 IP40 Power Entry Module SCHURTER Configuration Code DG12-CBDWMXXXC0-000-C6135-XXX-10X0-00 Type DG12 IP40 Product group Power Entry Modules with filter Business unit Connectors Weight range ca. 104g Part complies with EU RoHS directive: Yes Exemption 6(c) - Copper alloy containing up to 4% lead by weight Fluctuation margin n/a Part complies with China RoHS directive: No Part complies with IEC definition of halogen free products: No Company SCHURTER AG Important remarks: 1) Traces are product parts, substances etc. that are below a percentage of 0.1 % (1000ppm) by weight. Higher limits are accepted if the substance or material is legally regulated (see note no. 2). 2) REACH legislation, annex XVII contains a list of legal restrictions on substances or materials and is available at http://echa.europa.eu/candidate-list-table 3) Substances, materials etc. with possible harmful effects on human beings and the environment are listed. 4) There are no risks for human beings and to the environment if products are properly used as designated. This shall not apply to risks caused during procedures for disposal etc. 5) All statements herein are based on our present knowledge. If our products are used properly, there are no risks to human beings and/or the environment. Address Werkhofstrasse 8-12 CH-6002 Luzern, Switzerland E-mail substances@schurter.ch Internet www.schurter.com Certified Management Systems ISO 9001 since 1990 ISO 14001 since 1996 OHSAS 18001 since 2005 ISO 50001 since 2014 This Product Content Sheet has been established according to Umbrella Specs, an initiative of the German Electrical and Electronic Manufacturer’s Association (ZVEI). Reference: http://www.zvei.org/fachverbaende/electronic_components_and_systems/material_content_data Composition part Material group Materials CAS if applicable Average mass [weight-%] Sum [%] Traces Plastic parts Thermoplastic Polyamide 6 PA6 25038-54-4 3.65 36.05 Polyamide 66/6 PA66/6 24993-04-2 17.55 Polycarbonate PC 25766-59-0 1.15 Polyethylene terephthalate PET 25038-59-9 0.10 Polypropylene PP 9003-07-0 0.85 Polyphtalamide PPA n/a 12.70 Polystyrene PS 9003-53-6 0.05 Thermoset Unsaturated polyester UP n/a 1.60 1.60 Metal parts Silver Ag 7440-22-4 0.15 58.05 Copper Cu 7440-50-8 17.85 Chromium Cr 7440-47-3 0.05 Iron Fe 7439-89-6 31.40 Nickel Ni 7440-02-0 0.55 Lead Pb 7439-92-1 0.05 Exemption Tin Sn 7440-31-5 0.95 Zinc Zn 7440-66-6 6.35 Manganese Mn 7439-96-5 0.70 Other parts Ceramic n/a 0.55 4.30 Ferrite n/a 3.75 Sum in total: 100 owner ammannsa creation date 25.01.2019 release date 25.01.2019 released by ammannsa change order no 2016951 rev A page 1 of 1 D10-033-305 Substance Declaration DG12 IP40