DFP14121K00GD05 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Thick Film Resistor Networks Flat Pack, 11, 12 Schematics www.vishay.com For technical questions , contact: ff2aresistors@vishay.com Document Number: 31513 DFP Vishay Dale

FEATURES

  • 11 and 12 Schematics
  • 0.065" [1.65 mm] height for high density packaging
  • Low temperature coefficient (- 55 °C to + 125 °C) ± 100 ppm/°C
  • Hot solder dipped leads
  • Highly stable thick film
  • Wide resistance range
  • All devices are capable of passing the MIL-STD-202, Method 210, Condition C "Resistance to Soldering Heat" test Notes 1. Temperature Range: - 55 °C to + 125 °C 2. ± 1 % and ± 5 % tolerance available  Consult factory for stocked values STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL POWER RATING CIRCUIT SCHEMATIC LIMITING ELEMENT VOLTAGE MAX. TEMPERATURE1) COEFFICIENT ppm/°C STANDARD2) TOLERANCE RESISTANCE RANGE Ω TEMPERATURE COEFFICIENT TRACKING ppm/°C P25 °C ELEMENT W P25 °C PACKAGE W DFP 0.25 0.15 0.65 0.65 ± 100 ± 100 10 - 1M 10 - 1M TECHNICAL SPECIFICATIONS

11 Schematic 7 or 8 isolated resistors

The DFPxx11 provides the user with 7 or 8 nominally equal resistors with each resistor isolated from all others. Commonly used in the following applications:  "Wired OR" Pull-up  Long-line Impedance Balancing  Power Driven Pull-up  LED Current Limiting  Power Gate Pull-up  ECL Output Pull-down  Line Termination  TTL Input Pull-down

12 Schematic 13 or 15 resistors with one pin common

The DFPxx12 provides the user with a choice of 13 or 15 nominally equal resistors, each connected to a common pin (14 or 16). Commonly used in the following applications:  MOS/ROM Pull-up/Pull-down  TTL Input Pull-down  Open Collector Pull-up  Digital Pulse Squaring  "Wired OR" Pull-up  TTL Unused Gate Pull-up  Power Driven Pull-up  High Speed Parallel Pull-up Pin #1 DFP1411 DFP1611 Pin #1 DFP1412 DFP1612 DFP 14121K00G D05 DFP 14 12 102 G D05 HISTORICAL MODEL PI N COUNT SCHEMATIC RESISTA NCE VALUE TOLERA NCE CODE PACKAGI NG Historical Part Number example: DFP1412102G (will continue to be accepted) New Global Part Numbering: DFP14121K00GD05 (preferred part numbering format) GLOBAL MODEL PI N COUNT SCHEMATIC RESISTA NCE TOLERA NCE PACKAGI NG SPECIAL VALUE CODE DFP 14 11 = Isolated R = Decimal F = ± 1 % G = ± 2 % J = ± 5 % E05 = Lead (Pb)-free, Tube Blank = Standard 16 12 = Bussed K = Thousand D05 = Tin/Lead, Tube (Dash Number) M = Million ) stigid 3 ot pu( 10R0 = 10 Ω From 1-999 680K = 680 kΩ as applicable 1M00 = 1.0 MΩ GLOBAL PART NUMBER INFORMATION

Document Number: 31513 For technical questi ons, contact: ff2aresistors@vishay.com www.vishay.com Revision: 08-Sep-04 329 DFP Thick Film Resistor Networks Flat Pack, 11, 12 Schematics Vishay Dale DIMENSIONS in inches [millimeters] GLOBAL MODEL DIMENSION A DFP14 0.037 ± 0.010 [0.94 ± 0.25] DFP16 0.012 ± 0.010 [0.30 ± 0.25] Pin #1 0.050 [1.27] Typ. 0.019 ± 0.006 0.365 [9.27] Min. 0.385 [9.78] Max. 0.250 [6.35] Min. 0.250 [6.35] Min. 0.065 [1.65] Max. 0.825 [20.96] Max. 0.005 + 0.004 - 0.002 [0.127 + 0.102 - 0.051] TECHNICAL SPECIFICATIONS PARAMETER UNIT DFP14/16 Isolation Resistance 11 Schematic M Ω > 100 Voltage Coefficient of Resistance ppm/V < 50 typical Maximum Operating Voltage VDC 75 Operating Temperature Range °C - 55 to + 125 Storage Temperature Range °C - 55 to + 150 MECHANICAL SPECIFICATIONS Marking Model number, schematic number, value tolerance, pin 1 indicator, date code. Marking Resistance to Solvents Permanency testing per MIL-STD-202 Method 215. Solderability Per MIL-STD-202, Method 208E. Terminals Per MIL-STD-1276 DFPxx11, DFPxx12 = Type G (hot solder dipped). Hot solder dipped leads supplied as standard finish. Body Epoxy filled ceramic sandwich

11 Schematic

  • 55 + 25 + 70 + 125 + 150 0.65 0.50 0.25 Pow er R ating (W atts) Ambient Temperature °C Package Single Resistor

12 Schematic

  • 55 + 25 + 70 + 125 + 150 0.65 0.50 0.15 Package Single Resistor Derating Pow er Rating (W atts) Ambient Temperature °C PERFORMANCE TEST CONDITIONS MAX. ΔR (Typical Test Lots) Power Conditioning 1.5 x rated power, applied 1.5 hours “ON” and 0.5 hour “OFF” for 100 hours ± 4 hours at + 25 °C ambient temperature ± 0.50 % ΔR Thermal Shock 5 cycles between - 65 °C and + 125 °C ± 0.50 % ΔR Short Time Overload 2.5 x rated working voltage, 5 seconds ± 0.25 % ΔR Low Temperature Operation 45 minutes at full rated working voltage at - 65 °C ± 0.25 % ΔR Moisture Resistance 240 hours with humidity ranging from 80 % RH to 98 % RH ± 0.50 % ΔR Resistance to Soldering Heat Leads immersed in + 260 ° ΔC solder to within 1/16" of body for 10 seconds ± 0.25 % ΔR Shock Total of 18 shocks at 100 g's ± 0.25 % ΔR Vibration 12 hours at maximum of 20 g's between 10 and 2000 Hz ± 0.25 % ΔR Load Life 1000 hours at + 70 °C, rated power applied 1.5 hours “ON”, 0.5 hour “OFF” for full 1000 hour period. Derated according to the curve. ± 0.50 % ΔR Terminal Strength 1.5 pound pull for 30 seconds ± 0.25 % ΔR Insulation Resistance 10 000 Megohm (minimum) - Dielectric Withstanding Voltage No evidence of arcing or damage (200 V RMS for 1 minute) -

Document Number: 91000 www.vishay.com Revision: 18-Jul-08 1 Disclaimer Legal Disclaimer Notice Vishay All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all li ability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permit ted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.