D.FL75 HIROSE
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
2020.11 75Њ Micro Coaxial Connector Supporting 12G-SDI D.FL75 Series ■Features 1. Compact 75Њ Coaxial Connector Receptacle and plug (right angle) produces a total mating height of only 2.79mm. (Fig. 1) 2. High impedance matching High frequency compatible from DC to 12GHz suitable for 12G-SDI broadcasting equipment. 3. Terminated with 75Њ, ultra-fine coaxial cable Ø1.5mm, ultra-fine coaxial (flourinated resin insulated) cables allow for connections in limited spaces. 4. Suitable for 12G-SDI broadcasting and video equipment When used with the BNC(75) series plug, 75Њ system lines are maintained from interface connection to the internal wiring systems. 5. Supports automatic mounting Tape and Reel packaging allows for pick-and-place mounting. 6. Easy mating Compact connector makes a clear tactile click when mated which confirms complete mating. 7. Simple unmating process An extraction tool which simplifies the unmating process is available. 8. Environmental Compatibility ˗Halogen Free Chlorine and bromine above the standard values are not used for receptacle and plug harnesses. *As defined by IEC61249-2-21 Br-900 ppm maximum, Cl-900 ppm maximum, Cl+Br combined-1,500 ppm maximum ■Applications Broadcasting camera, FA/commercial camera, switcher, medical equipment, large video equipment. ■Function Diagram Exterior mating view Fig.1 6.7 D.FL75-R-SMT-1 D.FL75-LP(P)-084 2.79 Fig.2D.FL75 set image 75Њ, up to 12GHz ˙Plug D.FL75-LPʢPʣ-084 Plug side ˙Adapter BNCʢ75ʣJ-D.FL75J-BPA Relay adapter ˙Receptacle D.FL75-R-SMT-1 Receptacle side In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information.
D.FL75 Series●75Њ Micro Coaxial Connector Supporting 12G-SDI ■Product Specifi cations Ratings Nominal characteristic impedance : 75Њ Operating temperature range -40ˆ to +105ˆ (RH 90% max.) Frequency range : DC to 12GHz Storage temperature range -20ˆ to +70ˆ (RH 90% max.) Items Specifications Conditions 1. Contact resistance Center : 50m Њ max. Outer : 20mЊ max. Measured with 10mA max. 2. Insulation resistance 500 ̢Њ min. Measured with 250V DC 3. Withstanding voltage No flashover or insulation breakdown 300V AC for 1 min. 1.3 max. DC to 3GHz 1.5 max. 3 to 12GHz 5. Total Insertion/ Extraction Force Insertion force 30N max. Measured with applicable connectorExtraction force First time : 7N min. 2 to 20 times : 3N min. 6. Durability (insertion/ extraction with corresponding plug) Contact resistance Center : 55mЊ max. Outer : 25mЊ max. 20 mating cycles 7. Vibration resistance No electrical discontinuity for 1µs or more. No damaged, cracks or loose parts. Frequency of 10 to 100Hz, single amplitude of 1.5mm, acceleration of 59m/s2, for 5 cycles in 3 axial directions. 8. Shock resistance No electrical discontinuity for 1µs or more. No damaged, cracks or loose parts. Acceleration of 735m/s2, for a duration of 11 ms, sine half-wave waveform, 3 cycles in 6 axial directions. 9. Humidity resistance (Steady state) Insulation resistance : 10MЊ min. (high humidity) Insulation resistance : 500MЊ min. (dry) No damaged, cracked or loose parts. 96 hours at temperature of 40ˆ and humidity of 95ˋ 10. Temperature cycle No damaged, cracked or loose parts. Temperature : -40ˆ ˠ +5 to +35ˆ ˠ +105ˆ ˠ +5 to +35ˆ Time : 30 ˠ 5 max. ˠ 30 ˠ 5 max. (minutes) 5 Cycles 11. Salt spray Meets voltage standing wave ratio (V.S.W.R.) standards 5% salt water solution for 48 consecutive hours *V.S.W.R. Measurement System ■Materials / Finish Product Part Materials Finish/Remarks Plug-right angle Shell Phosphor bronze Partially gold plated Insulator LCP Black, UL94V-0 Female center contact Phosphor bronze Gold plated Receptacle Shield Phosphor bronze Gold plated Insulator LCP Black, UL94V-0 Male center contact Phosphor bronze Gold plated Adapter Shell Brass/zinc alloy Nickel plated Insulator PTFE resin ɹʕ Male center contact Phosphor bronze Gold plated ʪPlug harness measurement systemʫ ʪReceptacle measurement systemʫ Vector Network Analyzer BNC75(M) TerminationBNC75(M) BNC(75)J- D.FL75J-BPA D.FL75-LP(P)-084 100mm double-ended harness BNC(75)J- D.FL75J-BPA BNC75(M) Termination Vector Network Analyzer BNC75(M) D.U.T. D.U.T CONVERSION ADP D.FL75- R-SMT-1 Test board FR-4 D.FL75- R-SMT-1 D.FL75-LP(P)-084 100mm double-ended harness BNC(75)J- D.FL75J-BPA
D.FL75 Series●75Њ Micro Coaxial Connector Supporting 12G-SDI ■Plug 3.62 6.7 L(mm) L(mm) ˔Standard Tolerances for L Total length (mm) Standard Tolerance (mm) ɹ 50ʽLʽ200 ±4 ɹ200ʻLʽ500 ±8 ɹ 500ʻLʽ1000 ±12 1000ʻL ɹɹ ±1.5% Note : 50mm is the shortest length (L) that can be made. ˔Cable Assembly Product Number Structure Refer to this page when determining product specifications by model types. Please place orders with part numbers listed in this catalog. The characteristics and specifications of the product described in this catalog are reference values. Please make sure to check the latest delivery specifications at the time of product use. DFL75 - 2LPP - 084N 9 D -ʮʯ- L ■How to Specify Plug Cable Assembly ʦDouble-Ended Cable Assemblyʧʦ Single-Ended Cable Assemblyʧ Please contact us regarding cable terminal processing. ⁞Series name : D.FL75 Assembly type 2LPP : Double-ended Cable type 084N : Ø1.5mm cable Cable color 9 : Green Cable exterior conductor specifications D : Copper tape+exterior single braid Connector direction (double-ended) A : Same direction AC : Reversed 180° Total Length L L length (mm) ■Receptacle Part No. HRS No. Packaging Mass (g) D.FL75-R-SMT-1(01) 331-0079-0 01 100 pieces per pack 0.031/pc D.FL75-R-SMT-1(40) 331-0079-0 40 5,000 pieces per reel 0.2 Ø2.96 0.8 3.6 3.6 0.20.2 2 1.5 0.73 GND GNDGND SID GND GND GND CUTOUT PROHIBITION AREA SIGʢCENTERCONTACTʣ 1.1 3.3 4.3 1.65 2.15 2.3 1.75 2.2 0.38 2.1 1.85 2.1 2.05 1.75 4.2 3.4 0.28 BRecommended PC Board Pattern/ ɹMetal Mask Drawing ʲPlease order plug with as cabled assemblyʳ ˔Recommended PC Board ɹPattern Drawing ˔Recommended Metal Mask ɹDrawing ɹThickness : 0.10mm/0.12mm
D.FL75 Series●75Њ Micro Coaxial Connector Supporting 12G-SDI Ø13 21.3 12.5 8.2 Panel mounting hole dimensions +0.1 Ø9.6 +0.1 0 %'--1/+"1"/ Part No. HRS No. Mass (g) BNC(75)J-D.FL75J-BPA 311-0015-0 5.66/pc Part No. HRS No. Mass (g) D.FL75-LP-N 311-0080-0 1.85/pc There is a possibly of deforming / damaging the plug extraction tool when dropped, etc., please handle with care. ˔BNC(75) Conversion Adapter (Mating portion-D.FL75 side : Jack, BNC(75) jack) Recommended unmating tool the plug. ˔Embossed Carrier Tape Dimensions (JIS-C-0806 / IEC60286 compliant) ˔Reel Dimensions ■Conversion Adapter ■Plug Extraction Tool Ø1.5 (1.8) 1.755.5 Unreeling direction Ø Ø Ø The above diagram shows the embossed carrier tape dimensions used to package D.FL75-R-SMT-1(40). Recommended thickness / dimensions : 0.8-2.7mm
D.FL75 Series●75Њ Micro Coaxial Connector Supporting 12G-SDI BUsage Precautions ɹ1.Plugs (1) Mating/Unmating 1. To disconnect the connector, insert the extraction tool (D.FL75-LP-N) under the connector flange. Pull in a perpendicular direction in line with the connector's mating axis. Do not unmate the plug by pulling on the cable, this can damage the connector performance. 2. When mating, align the mating axes between the receptacle and cable assembly, and insert the cable assembly downward and perpendicular into the receptacle. Do not insert the cable assembly at a slanted angle. (2) Tolerable load to a cable after mating Once the connector has been mated do not apply forces exceeding the values in the diagram below. (3) Precautions Do not use excessive prying form to mate or un-mate the connectors as it may lead to damage. ɹ2.Receptacles (1) Recommended reflow temperature profile (reference) 1. The temperatures indicated are the surface temperatures of the printed circuit board near the terminal contact points. 2. Reflow soldering should be performed on the surface of the printed circuit board at a max temperature of 250ˆ or less. 3. Temperature profile may vary due to external mounting conditions such as solder paste, manufacturer, PCB size and other soldering materials. (2) Recommended metal mask thickness 0.1mm-0.12mm (3) Reflow cycles Maximum of 2 cycles ɹ3.Operating Environment and Storage Conditions (1) Operation environment This product was designed assuming use in a normal environment. Please be advised that using this product in the environments described below may result in discoloration and other types of degradation. ɾExposure to excessive amounts of fine particles and dust. ɾRegions/ areas with a high concentration of gases like sulfur dioxide, hydrogen sulfide and nitrogen dioxide. ɾAreas with drastic temperature change, such as locations near a heater. (2) Storage conditions Store this product in Hirose's packaging or similar conditions. Temperature : -10 to +40ˆ Humidity : 85% or less (recommended storage conditions) We recommend the product be used within six months from delivery. Products that have been stored beyond the recommended storage period need to be tested for mounting and solderability before use. 3.9N max. 1N max. 1N max. D.FL75-R-SMT-1 D.FL75-LP(P)-084 Lead-free paste solder temperature profile (reference) Temperatureʢˆʣ 260 240 220 200 180 160 140 120 100 130ˆ 180ˆ 230ˆ below 250ˆ less than 10 seconds less than 120 seconds less than 50 sec. less than 60 sec. Soldering time Time (sec.) Preheating time 220ˆ
D.FL75 Series●75Њ Micro Coaxial Connector Supporting 12G-SDI 100 100 24.5 ˔D.FL75 Series ■High Frequency Characteristics of related 75Њ, 12G-SDI Hirose products BPlug assembly High-frequency characteristics BReceptacle High-frequency Characteristics Please refer our BNC(75) series when mounting a BNC receptacle directly on to the board.
D.FL75 Series●75Њ Micro Coaxial Connector Supporting 12G-SDI Part No. HRS No. Mass (g) BNC(75)-PLR-PC(D)-12G-3 302-0088-0 5.3/pc Part No. HRS No. Panel mount Minimum PCB mount pitch Mass (g) BNC(75)-PLR-PC-12G-2 302-0085-0 Screw : M2 ʷ0.4 16mm 9.4/pc Part No. HRS No. Panel mount Minimum PCB mount pitch Mass (g) BNC(75)-PLR-PC-12G-1 302-0083-0 Screw : M2×0.4 17mm 13.6/pcBNC(75)-BLR-PC-12G 302-0081-0 Nut : HEX15 17.5mm BNC(75)-BLR-PC-12G(01) 302-0081-0 01 Nut : Ø15.8 16.5mm ■12G-SDI standard compatible BNC(75) connector 12G (UHD)-SDI (SMPTE ST-2082) transmission compatible. Meets 12G-SDI standard while maintaining superior reflection characteristics. 2ʷM2ʷ0.4 6.5 30.4 18.1 25.1 4.75 14.5 12.95 8.8 10.25 2.7 M2.6ʷ0.45 ˙Right angle receptacle
- Center contact THR type, 16mm minimum PCB mount pitch
- Center contact SMT type 6.5 18.1 30.4 Ø15.8 6.5 18.1 30.4 HEX15
- Center contact SMT type, 16mm minimum PCB mount pitch 18.1 6.5 30.415.4 11.93.2 2ʷM2ʷ0.4
D.FL75 Series●75Њ Micro Coaxial Connector Supporting 12G-SDI Part No. HRS No. Panel mount Minimum PCB mount pitch Mass (g) BNC(75)-PR(6)-PC-12G 302-0086-0 Screw : M2×0.4 16mm 9.65/pc Part No. HRS No. Applicable cable Mass (g) BNC(75)-P-5.5C-12G 302-0091-0 5.5C-UHD/FW 11.65/pc BNC(75)-P-3.3C-12G 302-0092-0 3.3C-UHD/FW 11.6/pc BPlug assembly High-frequency characteristics 1000 BReceptacle High-frequency characteristics ˙Straight receptacle
- Center contact THR type, 16mm minimum PCB mount pitch 15.2 Ø14.5 15.115 6 3.4 2ʷM2ʷ0.4 ˙Plug
- Straight crimp type The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 11/2020. Contents are subject to change without notice for the purpose of improvements. 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com