DFL2202J GOOD-ARK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Glass passivated Bridge Rectifiers
  • Ideal for automated placement
  • Very low profile - typical body height 1.5 mm
  • High surge current capability DFL J
  • Moisture sensitivity: level 1, per J-STD-020
  • High temperature soldering guaranteed: 260℃/10 seconds Mechanical Data
  • Case:DFL,Molding compound meets UL 94V-0 flammability rating Typical Applications VRRM 800 V VRMS 560 V VDC 800 V Io(AV) A IFSM A I2t A2s TJ, TSTG °C Maximum instantaneous forward voltage 1.1A 2.2A VF Volts TA=25℃ TA=125℃ IF=0.5A,IR=1.0A, Irr=0.25A Typical junction capacitance 4.0 V, 1 MHz CJ pF juntion to ambient RθJA juntion to case RθJC Note: 1) The thermal resistance from junction to ambient and case,mounted on P.C.B with 13× 13mm copper pads,2 OZ,FR4 PCB DFL2210J Unit Typical thermal resistance1) 31 ℃/W Parameter Test Conditions Symbol DFL2202J DFL2206J DFL2208J trr 1.8 uS Thermal Characteristics (TA=25℃ unless otherwise noted) Typical reverse recovery time DFL2210J Unit 1.02 1.1 Maximum DC reverse current at rated DC blocking voltage IR µA Parameter Test Conditions Symbol DFL2202J DFL2206J DFL2208J Electrical Characteristics (TA = 25 ° C unless otherwise noted) Maximum DC blocking voltage 200 600 1000 Maximum average forward rectified output current 2.2 Peak forward surge current 8.3 ms single half sine- wave superimposed on rated load 90 Rating for fusing (t≤8.3ms) Operating junction and storage temperature range - 55 to + 150 Maximum repetitive peak reverse voltage 200 600 1000 Maximum RMS voltage 140 420 700 General purpose use in ac-to dc bridge full wave rectification for SMPS,lighting,adapter,charger, home appliances,office equipment,and telecommunication applications Maximum Ratings (TA = 25 ° C unless otherwise noted) Parameter Symbol DFL2202J DFL2206J DFL2208J DFL2210J Unit www.goodark.com 1/4 2017.05-Rev.A

Figure 5. Typical Reverse Characteristics

Surface Mount Glass Passivated Single-Phase Bridge Rectifiers Reverse Voltage 200~1000V Output Current 2.2A These materials are intended as a reference to assist our customers in the selection of the Suzhou Goo-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. Disclaimers www.goodark.com 4/4 2017.05-Rev.A