DFL1002J GOOD-ARK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Glass passivated Bridge Rectifiers
  • Ideal for automated placement
  • Very low profile - typical body height 1.5 mm
  • High surge current capability DFL J
  • Moisture sensitivity: level 1, per J-STD-020
  • High temperature soldering guaranteed: 260℃/10 seconds Mechanical Data
  • Case:DFL,Molding compound meets UL 94V-0 flammability rating Typical Applications VRRM 800 V VRMS 560 V VDC 800 V Io(AV) A IFSM A I2t A2s TJ, TSTG °C IF=0.5A,Ta=25℃ IF=1.0A,Ta=25℃ Ta=25℃ Ta=125℃ IF=0.5A,IR=1.0A, Irr=0.25A Typical junction capacitance 4.0 V, 1 MHz CJ pF juntion to ambient RθJA juntion to case RθJC Note: 1) The thermal resistance from junction to ambient and case,mounted on P.C.B with 13×13mm copper pads,2 OZ,FR4 PCB General purpose use in ac-to dc bridge full wave rectification for SMPS,lighting,adapter,charger,home appliances,office equipment,and telecommunication Maximum Ratings (TA = 25 ° C unless otherwise noted) Parameter Symbol DFL1002J DFL1006J DFL1008J DFL1010J Unit Maximum repetitive peak reverse voltage 200 600 1000 Maximum RMS voltage 140 420 700 Maximum DC blocking voltage 200 600 1000 Maximum average forward rectified output current 1.0 Peak forward surge current 8.3 ms single half sine- wave superimposed on rated load 40 Rating for fusing (t≤8.3ms) 6.7 Operating junction and storage temperature range - 55 to + 150 Electrical Characteristics (TA = 25 ° C unless otherwise noted) Parameter Test Conditions Symbol DFL1002J DFL1006J DFL1008J DFL1010J Unit Thermal Characteristics (TA=25℃ unless otherwise noted) 1.0 Maximum DC reverse current at rated DC blocking voltage IR µA 1.1 Maximum instantaneous forward voltage VF Volts Typical reverse recovery time trr 2 uS 10.5 DFL1010J Unit Typical thermal resistance1) 29 ℃/W Parameter Test Conditions Symbol DFL1002J DFL1006J DFL1008J www.goodark.com 1/4 2017.04-Rev.A

Surface Mount Glass Passivated Single-Phase Bridge Rectifiers Reverse Voltage 200~1000V Output Current 1.0A Package Outline Dimensions DFLJ Footprint DFL G DFL J unit:mm unit:inch unit:mm unit:inch Dim Min Max Dim Min Max Dim Min Max Dim Min Max www.goodark.com 3/4 2017.04-Rev.A

Surface Mount Glass Passivated Single-Phase Bridge Rectifiers Reverse Voltage 200~1000V Output Current 1.0A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Goo-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2017.04-Rev.A