DFB2505_V01 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

  • UL Certificate # E258596
  • Glass−Passivated Junction
  • Ideal for Printed Circuit Board
  • Reliable Low−Cost Construction
  • Plastic Material has Underwriters Laboratory Flammability Classification 94V−0
  • Surge Overload Rating: 350 A Peak
  • High Case Dielectric Strength: 2500 VRMS
  • Isolated V oltage from Case to Lead: > 2500 V
  • Screw Torque Specification: 8.17 in−lbs Maximum
  • These Devices are Pb−Free and are RoHS Compliant ORDERING AND MARKING INFORMATION Part Number Marking Package Packing Method DFB2505 DFB2505 TS−6P 4L (Pb−Free) Rail DFB2510 DFB2510 DFB2520 DFB2520 DFB2560 DFB2560 DFB2580 DFB2580 DFB25100 DFB25100 DISCONTINUED (Note 1) DFB2540 DFB2540 TS−6P 4L (Pb−Free) Rail 1. DISCONTINUED: These devices are not recommended for new design. Please contact your onsemi representative for information. The most current information on these devices may be available on www.onsemi.com. TS−6P CASE 127EP MARKING DIAGRAM ZYWW DFB25XXX Z = Assembly Plant Code YWW = Date Code (Year & Week) DFB25XXX = Specific Device Code

DFB2505, DFB2510, DFB2520, DFB2540, DFB2560, DFB2580, DFB25100 www.onsemi.com ABSOLUTE MAXIMUM RATINGS (TA = 25°C, Unless otherwise specified) (Note 2) Symbol Parameter Value UnitDFB2505 DFB2510 DFB2520 DFB2540 DFB2560 DFB2580 DFB25100 VRRM Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V VRMS Maximum RMS Voltage 35 70 140 280 420 560 700 V VDC Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V I(AV) Maximum Average Forward Rectified Current 25 A IFSM Peak Forward Surge Current (8.3 ms Single Half−wave) 350 A R/C0113JC Typical Thermal Resistance (Note 3) 4.75 °C/W TJ Operating Temperature Range −55 to +150 °C TSTG Storage Temperature Range −55 to +150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 2. Single −phase, half−wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. 3. Device mounted on 4 inch x 6 inch x 0.25 inch Al −plate heat sink. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Parameter Test Conditions Value Unit VF Maximum Forward Voltage 12.5 A 1.0 V Instantaneous Forward Voltage 25 A 1.1 IR Maximum DC Reverse Current at Rated DC Blocking Voltage TA = 25°C 10 /C0109A TA = 125°C 500 I2t Rating for Fusing (t < 8.3 ms) 508 A2s CJ Typical Junction Capacitance per Leg (Note 4) 110 pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 4. Measured at 1 MHz and applied reverse bias of 4.0 V DC.

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. 98AON13720GDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1SIP4 30x20 © Semiconductor Components Industries, LLC, 2019 www.onsemi.com

onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales