DF64

DF64 HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

DF64 Series●4.5 mm pitch, Horizontal Mating 2-Piece System Connectors ■Product Specifi cations Ratings Current Rating (Note 1) BtoB BtoW Operating Temperature Range: -55 ʙ to 105ˆ (Note 2) Operating Humidity Range : 20 to 80% (Note 3)5A AWG#18 AWG#20 AWG#22 5A 4A 3A Voltage Rating AC/DCɹ350V Storage Temperature Range: -10 to 60ˆ (Note 4) Storage Humidity Range : 40 - 70ˋ (Note 4) Item Specifications Conditions 1. Insulation resistance No less than 1,000 Mø Measured at DC 500 V 2. Withstand voltage No fl ashover or breakdown AC 1, 500 V is applied for one minute. 3. Contact resistance 30 Mø max Measured at no more than DC 6 V, 100 mA (DC or 1,000 Hz) 4. Vibration Resistance No electrical discontinuity of 1µs or greater Frequency 10-55 Hz, half amplitude 0.75 mm, 10 cycles in each of three directions(axes) 5. Shock Resistance No electrical discontinuity outage of 1µs or greater Accelerated velocity: 490 m/s , for 11 ms, half-sine in 3 directions, 3 times for each of the three directions (axes) 6. Moisture- resistance ■ Contact resistance 30 Mø max ■ Insulation resistance 1,000 Mø minimum Temperature: 40 ±2ç; humidity: 90 to 95%, left as it is for 96 hours 7. Temperature cycles ■Contact resistance 30 Mø max ■Insulation resistance 1,000 Mø minimum -55ç for 30 minutes ˠ 5 to 35ç for 2 to 3 minutes ˠ105ç for 30 minutes ˠ 5 to 35ç for 2 to 3 minutes) in 5 cycles 8. Durability ■Contact resistance 30 Mø max ■Number of matings/unmatings 10 mating cycles 9. Resistance to solder heat The resin components will not become deformed or loose performance due to deformities Refl ow: according to the Recommended Temperature Profi le Hand soldering: temperature of soldering iron at 350ç ±10ç for 3 seconds (Note 1) This is the maximum current rating while all pins are powered or used as all power lines. (Note 2) Includes the temperature rise of power lines. (Note 3) Use without condensation on parts. (Note 4) The storage condition refers to long-term storage of the product on the shelf before assembly. Please use the operating temperature for temporary storage such as pre-assembly and during shipping. ■Materials Product Part Materials Finish UL spec. Receptacle Insulator LCP Beige UL94V-0 Contact Copper alloy Tin-plating − Reinforcing metal fi ttings Brass Tin-plating − Header Insulator LCP Beige UL94V-0 Contact Copper alloy Tin-plating − Reinforcing metal fi ttings Brass Tin-plating − Crimp case Insulator LCP Beige UL94V-0 Crimp contact Contact Phosphorous Bronze Tin-plating − ■Product Number Structure Refer to the charts below for determining specifi c part number characteristics. Please select connectors listed in this catalog when placing orders and be sure to check the latest delivery specifi cations at the time of ordering the product.

• Connector DF 64 - * S - 4.5 H DF 64 - * P - 4.5 H DF 64 - * P - 4.5 C
• Contact DF 64 - 1822 PCF ⁞ Series Name: DF Series No.: 64 ⁠ Number of contacts: 2, 3 ⁡ Connector type S: receptacle P: plug ⁢ Pitch : 4.5 mm ⁣ Wiring type ɹH: SMT Right Angle Type ɹC: crimp housing ⁞ Applicable wire size 1822 : 18 – 22 AWG Packaging style ɹPCF: In-line plug plug contact, on reel ɹPC: In-line plug contact, loose piece

DF64 Series●4.5 mm pitch, Horizontal Mating 2-Piece System Connectors ■Right angle receptacle A 10.2 1.5 P= 4.5 2.5 4.7 10.2 Part Number. HRS No. No. of Contacts A B DF64-2S-4.5H 667-1002-9-00 2 14.4 11.8 DF64-3S-4.5H Under development 3 18.9 16.3 (Note) This product is sold 500 connectors per reel. Please order by full reel quantities. Part Number HRS No. No. of Contacts C D DF64-2S-4.5H 667-1002-9-00 2 32 28.4 DF64-3S-4.5H Under development 3 44 40.4 Recommended PCB layout (t=1.6 mm) 1.1ʶ0.05 6.15ʶ0.05 10.15ʶ0.05 Bʶ0.05 2ʶ0.052ʶ0.05 1.5ʶ0.05 P=4.5ʶ0.05 2ʶ0.05

• Tape and Reel dimensions Unreeling direction F-F F F E-E E E P=24ʶ0.1 2ʶ0.15 Dʶ0.1 1.75ʶ0.1 Cʶ0.3 P=4ʶ0.1 П1.5 ʴ 0.1 ɹ

DF64 Series●4.5 mm pitch, Horizontal Mating 2-Piece System Connectors A 1.5 10.2 P=4.5 A 2.5 10.2 4.62 ˙Right angle pin header (SMT) Recommended PCB layout (t=1.6 mm) 1.1ʶ0.05 6.15ʶ0.05 10.15ʶ0.05 Bʶ0.05 2ʶ0.052ʶ0.05 1.5ʶ0.05 2ʶ0.05 Product No. HRS No. No. of Contacts A B DF64-2P-4.5H 667-1001-6-00 2 14.4 11.8 DF64-3P-4.5H Under development 3 18.9 16.3 (Note) This product is sold 500 connectors per reel. Please order by full reel quantities. Product No. HRS No. No. of Contacts C D DF64-2P-4.5H 667-1001-6-00 2 32 28.4 DF64-3P-4.5H Under development 3 44 40.4 ˔ Tape and Reel dimensions E E E-E F F F-F Unreeling direction P=24ʶ0.1 P=4ʶ0.12ʶ0.15 Cʶ0.3 1.75ʶ0.1Dʶ0.1 П1.5 ʴ 0.1 ɹ

DF64 Series●4.5 mm pitch, Horizontal Mating 2-Piece System Connectors A B A 4.55 P=4.5 ˙Crimp socket ˙Crimp contact t=0.2 2.1 2.1 13.6 (18.4) Part Number HRS No. No. of Contacts A B DF64-2P-4.5C 667-1003-1-00 2 18.4 19.0 DF64-3P-4.5C Under development 3 22.9 23.5 (Note) Each package contains 100 pieces. Please order in full package quantities. <4QFDJp DBUJPO/VNCFS> /POFQBDLBHFDPOUBJOT QJFDFT Product No. HRS No. Type Quantity Finish DF64-1822PCF 667-1004-4-00 Reel contact (Note 1) 1 reel = 5,000 pieces Tin-platingDF64-1822PC Under development Loose piece contact (Note 2) 1 package = 100 pieces (Note 1) This product is sold 5,000 pieces per reel. Please order by full reel quantities. (Note 2) Each package contains 100 pieces. Please order in full package quantities. ˔Applicable wire (Tinned, annealed copper wire) Conductor size (Core structure) Jacket Diameter AWG (34 pieces/Ø 0.18 mm) UL1015 ʢØ 2.9mmʣ AWG (21 pieces/Ø 0.18 mm) UL1015 ʢØ 2.6mmʣ AWG (17 pieces/Ø 0.16 mm) UL1015 ʢØ 2.4mmʣ (Note 1) Applicable wires will have conductors that are comprised of annealed, tin-plated material. (Note 2) Please contact your local Hirose sales rep if you plan on using wires other than those listed above. ⿆Applicable crimping tool Item Part Number HRS No. Applicable contact Applicator AP105-DF64-1822 CL901-4633-9-00 DF64-1822PCF Press body CM-105 CL901-0005-4-00 − Hand tool HT801/DF64-1822 Under development DF64-1822PC Extraction tool DF62/RE-MD CL902-4645-4-00 DF64-1822PCF DF64-1822PC (Note 1) Please conduct crimping work according to the "Crimping work standards" and "Crimping condition table". (Note 2) Hirose does not cover damage created by the use of unapproved Hirose Tools. Please contact your local Hirose Sales for clarifi cation. (Note 3) Hand tools do not have replaceable dies. (Note 4) Approved wire is limited to UL1015; 18, 20, 22 AWG. ˔Recommended wire UL1015 ˔Strip length 3.0ʙ4.0mm

DF64 Series●4.5 mm pitch, Horizontal Mating 2-Piece System Connectors ⿆Precautionary notes 1. Recommended Temperature Profi le (Compatible with lead-free soldering) [Applicable Conditions] 1. Peak temperature 2. Heating unit: no less than 220ˆ for no more than 60 seconds 3. Preheating unit: 150 to 180ˆ for 90 to 120 seconds 4. Number of times: 2 times max. ˎ Measurement is conducted at the contact lead part Please check the mounting conditions before use. Conditions such as solder paste types, manufacturer, PCB size and any other soldering materials may alter the performance of such materials. (Note 1) This temperature profi le is a recommended value only; please contact your Hirose Sales Rep for more information 2. Recommended hand soldering conditions Temperature of soldering iron: 350±10 ç , soldering time: no more than 3 seconds 3. Recommended screen thickness, aperture ratio (pattern surface ratio) Thickness: 0.1 mm, aperture ratio: 100% 4. Warping of the Board A maximum of 0.02 mm at the center of connector, as measured from either end of the connector 5. Cleaning Conditions IPA cleaning is allowed. (Cleaning is not recommended because cleaning may change the push/pull feeling etc. Please contact your local Hirose representative prior to the use of any cleaning agents. ) 6. Important Notes ■ When inserting the crimp contact into the crimp socket, do not insert it at a slanted angle to maintain the reliability of its performance. ■ Please use caution when mating/unmating this connector if it has not been mounted onto the PCB, doing so could deform or damage the contacts. ■ Do not pull on the wires of this connector as this may cause damage to the connector. ■ During the hand soldering process, make sure to not apply too much fl ux. Doing so may cause a solder wicking problem. ■ This product may experience some differences in color from one production lot to another. This color difference does not infl uence the performance of the connector. The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 11/2013. Contents are subject to change without notice for the purpose of improvements. 6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com Powered by TCPDF (www.tcpdf.org)