DF6-1P-3.96C HIROSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
3.96mm Pitch Connector Directly Mounted on Board DF6 Series I Features 1. Service Efficiency Up Conventional thick cables are directly mounted on the board piece by piece, but connecterization has achieved soldering services in a batch. This product enhances soldering service efficiency. 2. Miniaturization This product achieves miniaturization for thick cables. Mounting height on board : 7.5mm Width : 5.0mm 3. Board Prefixed Mechanism Since the connector is softly press-fitted to the board for insertion, it can be prefixed to the board. I Applications Secondary power supply units for various equipment Prefixed mechanism Height: 7.5mm width: 4.6mm
(Note 1) Voltage rating AWG 18 : 5A Cable size AWG 20 : 4A AWG 22 : 3A 300V AC Operating Temperature Range Operating Moisture Range Storage Temperature Range Storage Humidity Range -35to +85ç(Note 1) 20 to 80% -10to +60ç(Note 2) 40 to 70% (Note 2) Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note: HRS's tin plating process takes measures against whisker. Item Specification Condition 1.Insulation Resistance 1000Mohms min. 500V DC 2.Withstanding voltageNo flashover or insulation breakdown. 1500V AC/1 minute 3.Contact Resistance 15m ohms max. 100mA 4.Vibration No damage, cracks, or parts looseness. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5.Humidity (Steady state) No damage, cracks, or parts looseness. 96 hours at temperature of 40ç and humidity of 90% to 95% 6.Temperature Cycle No damage, cracks, or parts looseness. (-55ç: 30 minutes ➝ 15 to 35ç: 10 minutes➝ 85ç: 30 minutes➝ 5 to 35ç: 10 minutes ) 5 cycles 7.Resistance to Soldering heatNo deformation of components affecting performance. Flow: 250ç for 10 seconds Manual soldering: 300ç for 3 seconds I Material Product Part Material Finish Remarks Crimping Plug Insulator Polyamide White UL94V-0 Crimping Contact for Plug Brass Copper Alley Tin plated ________ I Ordering Information DF6 - * P - 3.96 C qe wr t rContact pitch: 3.96mm t C: Crimping plug qSeries Name : DF 6 wNumber of contacts: 1~8, 10 eConnector type P: Plug G Crimping Plug DF6A - 1822 PCF qw e ePackaging type PCF: Plug contact, reel packaging SC: Plug contact, bag packaging qApplicable cable type None: UL 1007 A: UL 1015 wApplicable cable size 1822: AWG#18~#22 G Crimping Contact
Photo: Contact Inserted I Crimping Contact Part Number CL No. Number of Contacts AB DF6- 2P-3.96C 546-0002-4 2 8.88 3.96 DF6- 3P-3.96C 546-0003-7 3 12.84 7.92 DF6- 4P-3.96C 546-0004-0 4 16.80 11.88 DF6- 5P-3.96C 546-0005-2 5 20.76 15.84 DF6- 6P-3.96C 546-0006-5 6 24.72 19.80 DF6- 7P-3.96C 546-0007-8 7 28.68 23.76 DF6- 8P-3.96C 546-0008-0 8 32.64 27.72 DF6-10P-3.96C 546-0011-5 10 40.56 35.64 Applicable CablePart Number CL No. Packaging Type Quantity A B CUL style Jacket dia. AWG sizeContact Construct TypeItem Part Number CL No. Applicable Contact Applicator AP105-DF6-1822P 901-4505-9 DF6 -1822PCF AP105-DF6A-1822P 901-4520-2 DF6A-1822PCF Manual crimping DF6 -TA1822HC 550-0174-9 DF6 -1822PC tool DF6A-TA1822HC 550-0222-0 DF6A-1822PC Extraction tool DF-C-PO(A) 550-0170-8 DF6/DF6A-1822PC(F) Contact View for Insertion Note: A packaging quantity is delivered by the bag unit (100 pcs.). Note 1. The applicable cable conductor is a tin plated and annealed copper wire. Note 2. If other cables are used instead of the applicable cable, contact the Hirose Sales Department. Note: If any trouble has been caused due to other tools, which are not designated by Hirose, Hirose never guarantee any products. G Slip length DF6-1822PC (F): 2.1mmto 2.6mm DF6A-1822PC (F): 2.3mmto 2.8mm G Applicable through-hole: 1.8 +0.15 BApplicable Crimping Tools
1.Recommended soldering condition 2.Cleaning condition 3.Connecting condition Flow: 250ç for 3 seconds Manual soldering: 290ç for 2 seconds I After soldering, if a load is given to the cable where connector and cable contain heat, the jacket holding member will be loosened. After soldering, the operation should be performed, after connector returns to room temperature. Refer to the "Nylon Connector Use Hand book". Don't use solvent to degrade the cable jacket like trichloroethane. In addition, avoid heat cleaning with solvent. Refer to the "Nylon Connector Use Hand book".