DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
DF50 Series●1mm Pitch, Board to Cable Lock Connector ■Product Specifications Ratings Current Rating 1A Operating Temperature Range Operating Humidity Range -35 to + 85°C (Note 1) 20 to 80% Voltage Rating AC/DC 100V Storage Temperature Range Storage Humidity Range -10 to + 60°C (Note 2) 40 to 70% (Note 2) Items Specifications Conditions 1. Insulation resistance No less than 500Mø Measured at DC 100V 2. Withstand voltage No flashover or breakdown AC300V is applied for one minute 3. Contact resistance No more than 30mø Measured at 1mA and no higher than 20mV 4. Vibration Resistance No electric outage of 1μs or greater 10 cycles in each of three directions at frequency 10-55 Hz, half amplitude 0.75 mm 5. Shock Resistance No electric outage of 1μs or greater Accelerated velocity: 490m/s for 11ms, half-sine in 3 directions, 3 times for each direction 6. Moisture-resistance Contact resistance: no more than 50mø; insulation resistance: no less than 100Mø Temperature: 40±2°C; humidity: 90 to 95%, left as it is for 96 hours 7. Temperature cycles Contact resistance: no more than 50mø; insulation resistance: no less than 500Mø (-55°C for 30 minutes → 5 to 35°C for 2 to 3 minutes → 85°C for 30 minutes → 5 to 35°C for 2 to 3 minutes) in 5 cycles 8. Push-pull durability life Contact resistance: no more than 50mø 30 times of push-pull operation 9. Solder Heat Resistance There should be no dissolution of the resin part which will influence the performance. Reflow: according to the Recommended Temperature Profile Hand soldering: temperature of soldering iron at 350°C for 3 to 4 seconds (Note 1) Temperature rise at the time of electrification is included. (Note 2) The term “storage” refers to the long-term storage condition of unused products before PCB mounting. Operating Temperature Range is applied to the deenergized state after mounting of PCB and the temporary storage state during transportation. (Note 3) The above specifications are representative of this series. Please refer to “delivery specifications” for official individual agreement. ■Materials Product Part Materials Color / Treatment UL Regulation Header (on the board side) Insulator LCP Black UL94V-0 Crimp socket Insulator PBT Black (DF50A) UL94V-0White (DF50S) (Note 1) Phosphor bronze is applied a material for only to the single-row straight pin header. ■Product Number Structure
- Connector ❶ ❷ ❸ ❹ ❺ ❻
- Crimp contact DF50 − 2830 SCF A ❶ ❼ ❽ ❾ ❺ Wire connection method/Geometry of terminal C: Crimp socket V: SMT Straight Type H: SMT Right Angle Type ❻ Specifications 51: SMT Embossed packaging 52: SMT Embossed packaging (with cap, DF50) ❼ Applicable wire size 2830: AWG28, 30 3032: AWG30, 32 (Under development) ❽ Method type/Packaging type SCF: Socket contact reel ❾ Plating specifications A: Gold plating ❶ Series Name: DF50 (Double-row pin header) DF50S (Double-row crimp socket) DF50A (Single-row) ❷ Number of contacts : 20, 30, 40, 50 (Double-row) : 2 to 16 (Single-row) ❸ Connector type DP: Double-row pin header DS: Double-row socket P: Single-row pin header S: Single-row socket ❹ Contact Pitch: 1mm
DF50 Series●1mm Pitch, Board to Cable Lock Connector [Specification Number : , () ] (51): Gold plating, embossed packaging (52): Gold plating, embossed packaging, with adsorption cap ■Double-row straight pin header BRecommended pattern schematic *: No. of Contacts Unit : mm Product No. HRS No. No. of Contacts A B C D E F G (Note) Please place orders for embossed packaged products by the multiple of the number of reels. (1,000 connectors per reel) B Emboss tape dimensions (in conformity to JIS C 0806) B Reel Condition Dimensions A A A-A C±0.1 D±0.11.75±0.1 12±0.1 4±0.1 0.2±0.05 R0.75 +0.1 0 Ø1.5 +0.1 0 2±0.1 E±0.3 6OSFFMJOHEJSFDUJPO $POUBDU/P 2.395 (Center of adsorption area) Product Label Unreeling direction F MAX G +2 Ø80±1 Ø380±2 Ø13±0.2 Ø21±0.8 2±0.5 P=1ɹ B A 8.15 7.05 Contact No.2 Contact No.* Contact No. *-1Contact No.1 Contact No.1 mark 0.9±0.050.85 MIN 1.6±0.054±0.05 1.6±0.05 B±0.05 0.6±0.05 P=1±0.05 0.7±0.051.8±0.05 Contact No.2 Contact No.* Contact No.*-1 Contact No.1
DF50 Series●1mm Pitch, Board to Cable Lock Connector ■Double-row right angle pin header [Specification Number: , ()] (51): Gold plating, embossed packaging *: No. of Contacts Unit : mm Product No. HRS No. No. of Contacts A B C D E F G (Note) Please place orders for embossed packaged products by the multiple of the number of reels. (1,000 connectors per reel) Contact No.1 Contact No. *-1 Contact No.2Contact No.* A P=1 B Contact No.1 mark 8.66 1.25±0.051.75±0.05 B±0.05 Contact No.* Contact No.2 0.6±0.05 P=1±0.05 Contact No.*-1 Contact No.1 0.9±0.05 1.8±0.05 BRecommended pattern schematic B Emboss tape dimensions (in conformity to JIS C 0806) B Reel Condition Dimensions B B B-B C±0.1 D±0.1 1.75±0.1 16±0.15 0.2±0.05R0.75 +0.1 0 Ø1.5 +0.1 4±0.1 2±0.1 E±0.3 Unreeling direction Product Label Ø1.5 in front of the perforation Unreeling direction F MAX G +2 Ø80±1 Ø380±2 2±0.5 Ø13±0.2 Ø21±0.8
DF50 Series●1mm Pitch, Board to Cable Lock Connector ■Single-row straight pin header BRecommended pattern schematic Unit : mm Product No. HRS No. No. of Contacts A B C DF50A-11P-1V () CL665-1019-9- 11 14.25 10 14 DF50A-12P-1V () CL665-1021-0- 12 15.25 11 15 DF50A-13P-1V () CL665-1023-6- 13 16.25 12 16 DF50A-14P-1V () CL665-1025-1- 14 17.25 13 17 DF50A-15P-1V () CL665-1027-7- 15 18.25 14 18 DF50A-16P-1V () CL665-1029-2- 16 19.25 15 19 (Note) Please place orders for embossed packaged products by the multiple of the number of reels. (1,000 connectors per reel) *: No. of Contacts [Specification Number: , () ] (51): Gold plating, embossed packaging 5.67 Contact No.1Contact No.* A P=1 B Contact No.1 mark 7.05 C Contact No.1Contact No.* 0.7±0.05 1.9±0.05 3.15±0.05 4.7±0.05 2.4±0.05 P=1±0.05 0.6±0.05 B±0.05
DF50 Series●1mm Pitch, Board to Cable Lock Connector
- DF50A-2P-1V to F50A-8P-1V (Number of contacts: 2 to 8)
- DF50A-9P-1V to DF50A-16P-1V (Number of contacts: 9 to 16) Unreeling direction A A 12±0.1 2±0.1 11.5±0.1 22.25 +0.2 0 1.75±0.1 4±0.1 (24) Ø1.5 +0.1 0 A-A Unreeling direction A A 0.2±0.05 32±0.3 28.4±0.1 14.2±0.1 4±0.1 2±0.1 Ø1.5 12±0.1 1.75±0.1 R0.75 +0.1 +0.1 0 Product Label Ø1.5 to the depth of the perforation Unreeling direction Geometry of reel (FREE) 38.4MAX 32.4+2 Ø80±1 Ø380±2 2±0.5 Ø13±0.2 Ø21±0.8 Unreeling direction Ø1.5 to the depth of the perforation Product Label 2±0.5 Ø380±2 Ø80±1 24.4+2 0 30.4MAX Ø21±0.8 Ø13±0.2 B Emboss tape dimensions (in conformity to JIS C 0806) B Emboss tape dimensions (in conformity to JIS C 0806) B Reel Condition Dimensions B Reel Condition Dimensions A-A Unreeling direction A A 0.2±0.05 32±0.3 28.4±0.1 14.2±0.1 4±0.1 2±0.1 Ø1.5 12±0.1 1.75±0.1 R0.75 +0.1 +0.1 0 Product Label Ø1.5 to the depth of the perforation Unreeling direction Geometry of reel (FREE) 38.4MAX 32.4+2 Ø80±1 Ø380±2 2±0.5 Ø13±0.2 Ø21±0.8
DF50 Series●1mm Pitch, Board to Cable Lock Connector ■Single-row right angle pin header BRecommended pattern schematic Unit : mm Product No. HRS No. No. of Contacts A B C DF50A-12P-1H () CL665-1041-8- 12 16.81 11 16 DF50A-16P-1H () CL665-1045-9- 16 20.81 15 20 (Note) Please place orders for embossed packaged products by the multiple of the number of reels. (1,000 connectors per reel) *: No. of Contacts [Specification Number: , () ] (51): Gold plating, embossed packaging Contact No.*Contact No.1 P=1 A B C 7.6 Contact No.1 mark 6.08 B±0.05 P=1±0.05 0.6±0.05 1.9±0.051.51±0.05 7.31±0.05 5.67±0.05 2.4±0.05 Contact No.*Contact No.1
DF50 Series●1mm Pitch, Board to Cable Lock Connector
- DF50A-2P-1H to DF50A-6P-1H (Number of contacts : 2 to 6)
- DF50A-8P-1H to DF50A-16P-1H (Number of contacts : 8 to 16) B Emboss tape dimensions (in conformity to JIS C 0806) B Emboss tape dimensions (in conformity to JIS C 0806) B Reel Condition Dimensions B Reel Condition Dimensions Unreeling directionC C C-C (24) 22.25 11.5±0.1 1.75±0.1 12±0.1 4±0.1 2±0.1 Ø1.5 +0.1 0 +0.2 0 Product Label Ø1.5 to the depth of the perforation Unreeling direction
30.4 MAX
24.4 +2 Ø80±1 Ø380±2 2±0.5 Ø13±0.2 Ø21±0.8 Unreeling directionC C C-C F±0.3 E±0.1 D±0.1 1.75±0.1 12±0.1 4±0.1 2±0.1 Ø1.5 +0.1 0 0.2±0.05 Product Label Ø1.5 to the depth of the perforation Unreeling direction G MAX H +2 Ø80±1 Ø380±2 2±0.5 Ø13±0.2 Ø21±0.8 Unit : mm Product No. HRS No. No. of Contacts D E F G H (Note) Please place orders for embossed packaged products by the multiple of the number of reels. (1,000 connectors per reel)
DF50 Series●1mm Pitch, Board to Cable Lock Connector ■Double-row crimp socket Unit : mm Product No. HRS No. No. of Contacts A B DF50S-20DS-1C CL665-0020-2-00 20 12.28 9 DF50S-30DS-1C CL665-0021-5-00 30 17.28 14 DF50S-40DS-1C CL665-0022-8-00 40 22.28 19 DF50S-50DS-1C CL665-0012-4-00 50 27.28 24 (Note) Sold in 100 piece units. ■Single-row crimp socket Unit : mm Product No. HRS No. No. of Contacts A B DF50A-2S-1C CL665-1002-6-00 2 3.95 1 DF50A-3S-1C CL665-1005-4-00 3 4.95 2 DF50A-4S-1C CL665-1007-0-00 4 5.95 3 DF50A-5S-1C CL665-1009-5-00 5 6.95 4 DF50A-6S-1C CL665-1011-7-00 6 7.95 5 DF50A-7S-1C CL665-1013-2-00 7 8.95 6 DF50A-8S-1C CL665-1015-8-00 8 9.95 7 DF50A-9S-1C CL665-1100-5-00 9 10.95 8 DF50A-10S-1C CL665-1018-6-00 10 11.95 9 DF50A-11S-1C CL665-1020-8-00 11 12.95 10 DF50A-12S-1C CL665-1022-3-00 12 13.95 11 DF50A-13S-1C CL665-1024-9-00 13 14.95 12 DF50A-14S-1C CL665-1026-4-00 14 15.95 13 DF50A-15S-1C CL665-1028-0-00 15 16.95 14 DF50A-16S-1C CL665-1030-1-00 16 17.95 15 (Note) Sold in 100 piece units. BP=1 A Contact No. *-1Contact No.1 Contact No.1 mark Contact No.*Contact No.2 HRS mark CAV No. 8.5 BP=1 A Contact No.1 Contact No.1 mark Contact No.* 6.85 *: No. of Contacts *: No. of Contacts
DF50 Series●1mm Pitch, Board to Cable Lock Connector ■Crimp contact Product No. HRS No. Type Quantity Treatment DF50-2830SCFA CL665-0002-0-00 Reel contact 30,000 pieces per reel Gold plating DF50K-2830SCFA CL665-0017-8-00 Reel contact 30,000 pieces per reel Gold plating (Note) As this product is sold per (30,000 piece) reel, please place orders by the multiple of the number of reels. Product No. HRS No. Recommended wire Cable name Conductor size (Core structure) Diameter of the wire DF50-2830SCFA CL0665-0002-0-00 UL1061 AWG28 (7pieces / Ø0.127mm) Ø0.8 to 0.9mm UL1061 AWG30 (7pieces / Ø0.102mm) DF50K-2830SCFA CL0665-0017-8-00 UL1571 AWG28 (7pieces / Ø0.13mm) Ø0.58mm (Note) Please contact our Sales Department when you are using wires other than applicable wires.
- Applicable wire (Tinned Annealed Copper Wire)
- Strip length 1.3 to 1.7mm ■Applicable crimping tool Type Product No. HRS No. Applicable contact Applicator AP105-DF50-2830S CL901-4616-0 DF50-2830SCFA Hand tool HT305/DF50-2830HC CL902-4634-8 DF50-2830SCFA Pull-out tool DF-C-PO(B) CL550-0179-2 DF50-2830SCFA (Note) Problems caused by tools other than our specified ones are out of warranty events. 0.63 0.121.4 2.7 Ø1.2 5.05 0.8 1.9 0.5 4.6
DF50 Series●1mm Pitch, Board to Cable Lock Connector 1. Recommended Temperature Profile (Compatible with lead-free soldering) [Applicable Conditions] 1.Peak temperature: a maximum of 250°C for no more than 10 seconds 2.Heating unit: no less than 220°C for no more than 60 seconds 3.Preheating unit: 150 to 180°C for 90 to 120 seconds 4.Number of times: no more than 2 times * Measurement is conducted at the contact lead part As it may change depending on the conditions such as solder paste types, manufacturers, PCB size, and other soldering materials, please fully check the mounting conditions before use. (Note 1) This temperature profile is a recommended value. 2. Recommended hand soldering conditions Temperature of soldering iron: 350±10°C, soldering time: 3 to 4 seconds 3. Recommended screen thickness and aperture ratio (Pattern surface ratio) Thickness: 0.1mm, aperture ratio: 100% 4.Warpage of the Board A maximum of 0.02mm at the center of connector, as measured from either end of the connector 5.Cleaning Conditions IPA cleaning is allowed. (Cleaning is not recommended because cleaning may change the push/pull feeling etc. Please contact us when you use other cleaning agents. ) 6.Precautions ▪ When inserting a crimp contact into a crimp socket, do not insert it at a slanted angle in order to maintain the reliability of its performance. ▪ Please refrain from pushing/pulling operation when the PCB is not mounted. It may cause breakage, contact deformation, etc. ▪ Please refrain from pushing/pulling operation with wires in your hand. It may cause damage. ▪ During hand soldering, do not apply flux which will cause flux oozing on connector. ▪ This product may have a little difference in its molded color depending on the production lot, but the difference doesn't have any influence on the performance. BPrecautions TIME (sec) 180ˆ 100 150 200 250 220ˆ PRE-HEATING TIME SOLDERING TIME MAX 250ˆ 90~120sec 60secMAX 10secMAX TEMPERATUREʢˆʣ
DF50 Series●1mm Pitch, Board to Cable Lock Connector USA: HIROSE ELECTRIC (U.S.A.), INC. San Jose Office
3255 Scott Boulevard, Building 7, Suite 101 Santa
Clara, CA 95054 Phone : +1-408-253-9640 Fax : +1-408-253-9641 http://www.hiroseusa.com USA: HIROSE ELECTRIC (U.S.A.), INC. Headquarters
2688 Westhills Court, Simi Valley, CA 93065-6235
Phone : +1-805-522-7958 Fax : +1-805-522-3217 http://www.hiroseusa.com HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 1001, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +852-2803-5338 Fax : +852-2591-6560 http://www.hirose-hongkong.com.hk CHINA: HIROSE ELECTRIC TRADING (SHANGHAI) CO., LTD. Beijing Branch A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, Chao Yang District, Beijing, 100025 Phone : +86-10-5165-9332 Fax : +86-10-5908-1381 http://www.hirose-china.com.cn TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 103 8F, No.87, Zhengzhou Rd., Taipei Phone : +886-2-2555-7377 Fax : +886-2-2555-7350 http://www.hirose-taiwan.com.tw GERMANY: HIROSE ELECTRIC EUROPE B.V. German Branch Herzog-Carl-Strasse 4 D-73760 Ostfildern (Scharnhauser Park) Phone : +49-711-4560-02-1 Fax : +49-711-4560-02-299 http://www.hirose.de INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. Bangalore Liaison office Unit No.03, Ground Floor, Explorer Building International Tech Park Whitefield Road, Bangalore 560066 Karnataka, India Phone : +65-6324-6113 Fax : +65-6324-6123 http://www.hirose-singapore.com.sg SINGAPORE: HIROSE ELECTRIC SINGAPORE PTE. LTD.
10 Anson Road #26-1 International Plaza 079903
Phone : + 65-6324-6113 Fax : +65-6324-6123 http://www.hirose-singapore.com.sg THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 1101 CC Amsterdam Z-O Phone : +31-20-6557460 Fax : +31-20-6557469 http://www.hiroseeurope.com UNITED KINGDOM: HIROSE ELECTRIC EUROPE B.V. UK Branch
22 Vincent Avenue, Crownhill Business Centre,
Crownhill, Milton Keynes, MK8 0AB Phone : +44-1908-305750 Fax : +44-1908-305768 http://www.hirose.co.uk USA: HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)
37677 Professional Center Drive, Suite #100C
Livonia, MI 48154 Phone : +1-734-542-9963 Fax : +1-734-542-9964 http://www.hiroseusa.com CHINA: HIROSE ELECTRIC TRADING (SHANGHAI) CO., LTD. 1601,Henderson Metropolitan,NO.300 ,East Nanjing Road,Huangpu District, Shanghai,China 200001 Phone : +86-21-6391-3355 Fax : +86-21-6391-3335 http://www.hirose-china.com.cn CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre 5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008 Phone : +86-755-8207-0851 Fax : +86-755-8207-0873 http://www.hirose-china.com.cn KOREA: HIROSE KOREA CO., LTD. 1261-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do 429-450 Phone : +82-31-496-7000,7124 Fax : +82-31-496-7100 http://www.hirose.co.kr 6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 04/2013. Contents are subject to change without notice for the purpose of improvements. INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD Delhi Liaison Office Suite No. 606 5th Floor SB Tower 1A/1 Sector 16 A Filmcity Noida 201301 Uttar Pradesh-India Phone : +91-120-4804917 Fax : +91-120-4804949 http://www.hirose.com/sg/ MALAYSIA: HIROSE ELECTRIC SINGAPORE PTE. LTD (Representative office) 1-10-07, Suntech @ Penang Cybercity (1164),Lintang Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Phone : +604-619-2564 Fax : +604-619-2574 http://www.hirose.com/sg/