DF49 HIROSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors DF49 Series 2010.9 ■Features 1. Ultra low-profile structure A low-profile and space-saving item, with a stacking height of 0.7mm (0.8mm MAX). 2. Reliable electrical and mechanical connection Despite its small mated height, unique contact configuration assures highly reliable connection, with effective mating length of 0.5mm. 3.Enhanced shielding and ground connections Metal shells on the plug and receptacle connect to each other, assuring reliable ground connection and EMC protection. 4. Simplified lock structure with audible click Audibly clicks into place thanks to the two-point lateral lock structure and optimized contact force. 5. Incorrect insertion prevention mechanism The bend structure of the shell prevents the reverse insertion of the plug connector and mating failure. 6. Solder wicking prevention Nickel barriers prevent solder wicking in the critical contact areas.(Receptacle) ■Connectors for conductivity tests We have a line-up of plug connectors for inspection, usable for electrical testing. 0.7±0.1 (Mated height) (0.5) Effective mating length 5IFCFOETUSVDUVSFPGUIFTIFMM QSFWFOUTUIFSFWFSTFJOTFSUJPO Reliable connection Mis-insertion Prevention Figure. 1 Figure. 2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors ■Specifications Ratings Current rating AWG42 : 0.25A 電線サイズ AWG44 : 0.2A (Note 3) AWG46 : 0.15A Operating temperature range -35ç to 85ç (Note 1) Operating humidity range 20% to 80% Voltage rating AC30V Storage temperature range -10ç to 60ç (Note 2) Storage humidity range 40% to 70% (Note 2) Item Specification Conditions 1. Insulation resistance 50 Mø min. 100 V DC 2. Withstanding voltage No flashover or insulation breakdown 100 Vrms AC / 1 minute 3. Contact resistance Signal:80mø max, Ground 80mø max 100 mA,(DC or 1,000Hz) 4. Vibration No electrical discontinuity of 1 μs or longer Frequency: 10 to 55 Hz, single amplitude of 0.75mm, 10 cycles in each of the 3 directions 5.Humidity Contact resistance (change from initial value) 50 mø max. Insulation resistance: 25 Mø min. 96 hours at of 40 ±2°C, and humidity of 90 to 95% 6. Temperature cycle Contact resistance (change from initial value) 50 mø max. Insulation resistance: 25 Mø min. -55°C → 5 to 35°C → 85°C → 5 to 35°C Time: 30 min. → 2 to 3 min. → 30 min. → 2 to 3 min. 5 cycles 7. Durability Contact resistance (change from initial value) 50 mø max. 30 cycles 8. Resistance to soldering heat No deformation of affecting performance Reflow: At the recommended temperature profile Manual soldering: 350°C for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for a long period prior to mounting and use. The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. Note 3: With only the connector portion at an elevated temperature level, the rated current value is set. Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. ■Materials Product Part Material Finish Remarks Receptacle Insulator LCP Color:Black UL94V-0 Plug Contacts Phosphor bronze Gold plated UL94V-0 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors ■Ordering information

  • Connector ❶ Series name :DF ❻ Contact pitch:0.4mm ❷ Series No. :49 ❸ Connector style Receptacle/Shell J:Receptacle for conductivity tests Blank:Standard ❼ Termination type H :Rightangle SMT SD :Fine coaxial cable plug ❹ Number of positions: 20,30,40 ❽ Packaging (51):Embossed tape packaging ❺ Connector type S:Receptacle P:Plug ❾ Installation item(separate) SHL:Metal cover ❶ ❷ ❸ ❹ ❺ ❻ ❽ ❼ ■Combinations [Standard use] DF49-*S-0.4H(**) + DF49-*P-ASSY DF49-*P-0.4SD(**) DF49-*P-SHL Note: The product specification of the above combination is shown on page 2. [Receptacle conductivity test] DF49-*S-0.4H(**) + DF49J-*P-ASSY••(Note) DF49J-*P-0.4SD(**) DF49-*P-SHL Note: This harness item is only usable for the receptacle test. For the product specification of the above combination, please contact our sales department. [Plug conductivity test] DF49-*S-0.4H(**) + DF49-*P-ASSY DF49-*P-0.4SD(**) DF49-*P-SHL Note: For the product specification, please contact our sales department. π : ASSY means a harness item. DF 49 − * P − SHL ❶ ❷ ❹ ❺ ❾ The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors CAV No. Contact No.1 Contact /PO 0.08±0.03 B±0.15 A±0.2 1.33±0.15 ■Receptacles (SMT) ■Recommended PCB mounting pattern (0.25) 0.8±0.02 1.9±0.02 0.5±0.03 B±0.02 Contact No.1 (/%QBE Contact pad C±0.02 D±0.02 Unit : mm Part Number CL No. Number of contacts A B C DF49-30S-0.4H() Under planning 30 16.8 11.6 16.03 Note 1: Tape and reel packaging (7,000 pieces/reel). Order by number of reels. [Specification number] - , (**) (51): Embossed tape packaging (7,000 pieces per reel) The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors 0.5±0.05 0.7±0.05 0.8±0.05 0.44±0.03 0.31MAX(Jacket) 0.05MAX 0.1MAX 0.2MAX(Insulator) B±0.15 P=0.4±0.07 D±0.1 Outer shield (for individual conductor)Inner conductor (Pre-L soldering required) E E(FREE) (Ground bar) Contact No.1 CAV No. 3.55±0.2 P=0.4±0.1 B±0.2 A±0.2 C±0.1 0.57±0.1 ■Plugs ■Recommended Fine Coaxial Cable Preparation Unit : mm Part Number CL No. Number of contacts A B C D Note 1: Tape and reel packaging (7,000 pieces/reel). Order by number of reels. Note 2: The metal cover (DF49-*P-SHL) is required for fine coaxial cable termination. [Specification number] - , () (51): Embossed tape packaging (7,000 pieces per reel) The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors Unit : mm Part Number CL No. Number of contacts A B C DF49-20P-SHL 662-5505-0 20 4.0 10.1 11.18 DF49-30P-SHL Under planning 30 π 14.1 15.18 DF49-40P-SHL 662-5502-1 40 12.0 18.1 19.18 Note 1 : Tape and reel packaging (10,000 pieces/reel). Order by number of reels. Note 2 : π dimensions will be set separately during development. [Specification number] - , () (51): Embossed tape packaging (10,000 pieces per reel) ■Metal cover 0.2±0.1 0.85±0.1 0.5±0.1 0.65±0.1 C±0.1 B±0.15 A±0.15 0.6±0.1 2.48±0.1 1JO/P ˎ The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors Unit : mm Part Number CL No. Number of contacts A B C D E Note 1 : Embossed tape will have perforated feed holes on single side (20pos.)

  • Embossed Carrier Tape Dimensions ■Packaging Specification (1.45)2±0.15 0.2±0.05 C±0.3 1.75±0.1A±0.1 B±0.1 4±0.1 8±0.1 Ø1.5 Unreeling direction R0.75 +0.1 0 +0.1
  • Reel Dimensions 2±0.5 Ø382MAX (Ø79) E MAX Ø13±0.2 Ø21±0.8 Part number label D +2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors

  • Plugs ■Packaging Specification Unreeling direction (1.4) 4±0.1 0.2±0.05 2±0.1 8±0.1 1.75±0.1 R0.75 Ø1.5 +0.10 +0.1 A±0.1 B±0.1 C±0.3
  • Reel Dimensions 2±0.5 Ø382MAX (Ø79) E MAX Ø13±0.2 Ø21±0.8 D +2 Part number label Unit : mm Part Number CL No. Number of contacts A B C D E Note 1 : Embossed tape will have perforated feed holes on single side (20pos.) The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors 1. Recommended temperature profile Solder composition : Paste, 96.5%Sn/3.0%Ag/0.5%Cu Note 1: Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals. 2.Recommended manual soldering Manual soldering: 350ç for 3 seconds Do NOT use flux compound when manual soldering. 3. Recommended screen thickness and open area ratio (Pattern area ratio) Standard thickness 0.1mm Open area ratios :Lead terimnal 100% :Ground terminal 75% 4.Board warpage Maximum of 0.02mm at the connector center, with both ends of the connector as reference points. 5.Cleaning conditions Refer to “Nylon Connector Use Handbook”. ■Precautions 60sec max 100 150 200 250 Time (sec.) 0 100 150 200 25050 Room temperature 300 90 to 120sec 180ç 250ç 220ç 150ç Temperature (ç) ■Extraction tool For details about the extraction tool, please contact your Hirose sales representative. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors ■Precautions Precautions Mating / un-mating Please work according to the following operational procedure: ① Confirmation of insertion direction Upon insertion, please check the front and rear of the connector at the cable side. On the front side, the ∆ mark, HRS mark and the display of the pole number are stamped. ② Confirmation of temporary insertion Please lay the plug into the receptacle gently and insert up to the temporary insertion position. * If inserted up to the temporary insertion position, the connection can be correctly ensured. ③ Confirmation of insertion From the temporary insertion position, please push on both sides of the plug simultaneously and with equal force, to confirm the insertion. ˚NBSL )34NBSL /VNCFSPGDPOUBDUTJOEJDBUPS $"7/P 3FDFQUBDMFTIFMMEVBMFOETVSGBDF 3FDFQUBDMFTIFMMEVBMFOETVSGBDF 1MVHTIFMMFOETVSGBDF 1MVHTIFMMFOETVSGBDF #FGPSFUFNQPSBSZJOTFSUJPO 8JUIUFNQPSBSZJOTFSUJPO Connection direction Confirmed insertion Push in both sides of the plug. Mating The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors Precautions un-mating Use a dedicated extraction tool to un-mate the plug. Insert the tool under either end of the plug and pull as illustrated bellow. Insert the tool under either pull out the plug Finish end of the plug. (for the horizontal direction)

  • Do not mate / un-mate the connectors when receptacle is not mounted on the board.
  • In the manual soldering process, don't carry out the flux coating which will cause a flux blister on the connector.
  • Excessive scoop insertion or extraction may result in damage. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.