DF4-22DP-2C

DF4-2P-2C HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

2mm Pitch Connector Directly Mounted on Board DF4 Series I Features 1. Cost Saving for Header Thanks to the insertion/extraction socket and the harness product at the both connector edges, one of two headers necessary at both edge sockets can be saved without losing the function to separate individual boards. 2. Miniature and Multiple Contacts The miniature connector has broad variations in contact number. Board mounting height : 4mm (Crimping ) Maximum contact number : 32 contacts (Crimping ) 3. Board Pre-fixed Mechanism The insertion state to the board is a light crimping, which enables the pre-fixed process to the board. I Applications Note PC, Small business equipment Height 4mm Board pre-fixed mechanism

(Note 1) Voltage rating Crimping Insulation Displacement Crimping AWG 24 : 3A Cable Size AWG 26 : 2A AWG 28 : 1A Cable Size AWG 26, 28 : 1A 250V AC Insulation Displacement100V AC Operating Temperature Range -30 to +85ç(Note 2) Operating Moisture Range -40 to 80% Storage Temperature Range -10 to +60ç Storage Moisture Range -40 to 70% Item Specification Condition 1. Insulation Resistance 1000M ohms Min 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 3. Crimping Area Resistance 30m ohms Max. 100mA 4. Vibration No damage, cracks, or parts looseness. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state)Contact resistance: 30m ohms Max Insulation resistance:500M ohms Min 96 hours at temperature of 40ç and humidity of 90% to 95% 6. Temperature Cycle Contact resistance: 30m ohms Max Insulation resistance: 1000M ohms Min Flow: 250ç for 10 seconds 7.Resistance to Soldering heatNo deformation of components affecting performance. Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature R ange and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. I Material Product Part Material Finish Remarks Crimping Plug Insulator Polyamide Black UL94V-0 Crimping Contact for Plug Contact Brass Tin plating ––––––– Insulator Displacement Plug Insulator Polyamide Black UL94V-0 Contact Phosphor copper Tin plating ––––––– I Ordering Information DF4 - * P - 2 C qe w tr qSeries Name: DF4 wNumber of Contact: 2 to 15, 4 to 32 eConnector Type P: Single row plug DP: Double row plug rContact Pitch: 2mm tConnection Type C: Crimping socket R26: Insulator displacement plug for AWG26 R28: Insulator displacement plug for AWG28 G Connector DF4 - 2428- PCE qw qApplicable cable size 2428 : AWG24 to 28 wPackaging Type PCF: Plug contact/Reel PC: Plug contact/Bag G Contact

I Single Row Crimping Plug [Specific No.] – , () Blank: 1 bag: 100pcs. (40): 500pcs. packaging (41): 1000pcs. packaging Photo: Contact insertion state. G Applicable Through-hole Diameter : Ø0.8+0+0.1 Unit:mm CL No.Part Number 544-0003-4- 544-0004-7- 544-0005-0- 544-0006-2- 544-0007-5- 544-0008-8- 544-0009-0- DF4- 2P-2C () DF4- 3P-2C () DF4- 4P-2C () DF4- 5P-2C () DF4- 6P-2C () DF4- 7P-2C () DF4- 8P-2C () Number of Contacts A B 04.5 06.5 08.5 10.5 12.5 14.5 16.5 02.0 04.0 06.0 08.0 10.0 12.0 14.0 CL No.Part Number 544-0010-0- 544-0011-2- 544-0012-5- 544-0013-8- 544-0014-0- 544-0015-3- 544-0016-6- DF4- 9P-2C () DF4-10P-2C () DF4-11P-2C () DF4-12P-2C () DF4-13P-2C () DF4-14P-2C () DF4-15P-2C () Number of Contacts A B 18.5 20.5 22.5 24.5 26.5 28.5 30.5 16.0 18.0 20.0 22.0 24.0 26.0 28.0 I Crimping Contact Part Number CL No. Packaging Type Quantity Finish DF4-2428PCF 544-0020-3 Reel 10,000 Tin plating DF4-2428PC 544-0021-6 Bag 100 Tin plating G Applicable Cable (Tin plating Annealed copper wire) Note:If other cables are used instead of the applicable cable, contact Hirose sales department. G Strip Length: 1.3 to 1.9mm BApplicable Crimping Tool Type Part Number CL No. Applicable Contact Applicator AP105-DF4-2428P 901-4539-0 DF4-2428PCF Press Main Unit CM-105 901-0005-4 ––––––– Manual Crimping Tool DF4-TA2428HC 550-0173-6 DF4-2428PC Extraction Tool DF-C-PO (B) 550-0179-2 DF4-2428PCF Note: If any trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any products. Conductor Size Recommended Cable Jacket Diameter AWG24 (11 cores./0.16mm) UL1061 AWG 26 (7cores./0.16mm) Ø0.75 to Ø1.2mm AWG 28 (7cores./0.127mm) UL1061/1007

[Specific No.] – , () Blank: 1 bag: 100pcs. Unit:mm CL No.Part Number 544-0078-3- 544-0079-6- 544-0080-5- 544-0081-8- 544-0082-0- 544-0083-3- 544-0084-6- 544-0085-9- 544-0086-1- 544-0087-4- 544-0088-7- 544-0089-0- 544-0090-9- 544-0091-1- 544-0092-4- DF4-04DP-2C () DF4-06DP-2C () DF4-08DP-2C () DF4-10DP-2C () DF4-12DP-2C () DF4-14DP-2C () DF4-16DP-2C () DF4-18DP-2C () DF4-20DP-2C () DF4-22DP-2C () DF4-24DP-2C () DF4-26DP-2C () DF4-28DP-2C () DF4-30DP-2C () DF4-32DP-2C () Number of Contacts A B 04.8 06.8 08.8 10.8 12.8 14.8 16.8 18.8 20.8 22.8 24.8 26.8 28.8 30.8 32.8 02.0 04.0 06.0 08.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 Note:The dip side may be deviated according to the cable thickness and the crimping contact bent up/down. I Double Row Crimping Plug Photo: Contact insertion state G Applicable Through-hole Diameter Ø0.9±0.05

I Right Angle Type ID Plug G Applicable Through-hole Diameter : Ø0.8+0+0.1 Note 1. The plug, which has the mark at the designated position, is for AWG26. Note 2. The cleaning by heat and trichloroethylene an't be implemented. Photo: Contact insertion state. G Applicable Cable (Tin plating Annealed copper wire) G AWG26 Part Number Applicable Cable Jacket Diameter DF4-*PA-2R26 UL1061 AWG26 (7/0.16) Ø0.9 to 1mm DF4-*PA-2R28 UL1061 AWG28 (7/0.127) Ø0.9 to 1mm [Specific No.] – , () Blank: Tin plating, 1 pack: 100pcs. Unit:mm CL No.Part Number 544-0022-9- 544-0023-1- 544-0024-4- 544-0025-7- 544-0026-0- 544-0027-2- 544-0028-5- 544-0029-8- 544-0030-7- 544-0031-0- 544-0032-2- 544-0033-5- 544-0034-8- 544-0035-0- DF4-02PA-2R26 () DF4-03PA-2R26 () DF4-04PA-2R26 () DF4-05PA-2R26 () DF4-06PA-2R26 () DF4-07PA-2R26 () DF4-08PA-2R26 () DF4-09PA-2R26 () DF4-10PA-2R26 () DF4-11PA-2R26 () DF4-12PA-2R26 () DF4-13PA-2R26 () DF4-14PA-2R26 () DF4-15PA-2R26 () Number of Contacts A B 06.0 08.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 32.0 02.0 04.0 06.0 08.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 G AWG28 Unit:mm CL No.Part Number 544-0036-3- 544-0037-6- 544-0038-9- 544-0039-1- 544-0040-0- 544-0041-3- 544-0042-6- 544-0043-9- 544-0044-1- 544-0045-4- 544-0046-7- 544-0047-0- 544-0048-2- 544-0049-5- DF4- 2PA-2R28 () DF4- 3PA-2R28 () DF4- 4PA-2R28 () DF4- 5PA-2R28 () DF4- 6PA-2R28 () DF4- 7PA-2R28 () DF4- 8PA-2R28 () DF4- 9PA-2R28 () DF4-10PA-2R28 () DF4-11PA-2R28 () DF4-12PA-2R28 () DF4-13PA-2R28 () DF4-14PA-2R28 () DF4-15PA-2R28 () Number of Contacts A B 06.0 08.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 32.0 02.0 04.0 06.0 08.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 Note : A packaging quantity is delivered in the bag unit (100 pcs.). If needed, please order the product per bag.

G Applicable Through-hole Diameter : Ø0.8+0+0.1 Note 1. The plug, which has the mark at the designated position, is for AWG26. Note 2. The cleaning by heat and trichloroethylene can't be implemented. Photo: Contact insertion state. G Applicable Cable (Tin plating Annealed copper wire) G AWG26 Part Number Applicable Cable Jacket Diameter DF4-*P-2R26 UL1061 AWG26 (7/0.16) Ø0.9 to 1mm DF4-*P-2R28 UL1061 AWG28 (7/0.127) Ø0.9 to 1mm [Specific No.] – , () Blank: Tin plating, 1 pack: 100pcs. Unit:mm CL No.Part Number 544-0050-4- 544-0051-7- 544-0052-0- 544-0053-2- 544-0054-5- 544-0055-8- 544-0056-0- 544-0057-3- 544-0058-6- 544-0059-9- 544-0060-8- 544-0061-0- 544-0062-3- 544-0063-6- DF4-02P-2R26 () DF4-03P-2R26 () DF4-04P-2R26 () DF4-05P-2R26 () DF4-06P-2R26 () DF4-07P-2R26 () DF4-08P-2R26 () DF4-09P-2R26 () DF4-10P-2R26 () DF4-11P-2R26 () DF4-12P-2R26 () DF4-13P-2R26 () DF4-14P-2R26 () DF4-15P-2R26 () Number of Contacts A B 06.0 08.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 32.0 02.0 04.0 06.0 08.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 G AWG28 Unit:mm CL No.Part Number 544-0064-9- 544-0065-1- 544-0066-4- 544-0067-7- 544-0068-0- 544-0069-2- 544-0070-1- 544-0071-4- 544-0072-7- 544-0073-0- 544-0074-2- 544-0075-5- 544-0076-8- 544-0077-0- DF4- 2P-2R28 () DF4- 3P-2R28 () DF4- 4P-2R28 () DF4- 5P-2R28 () DF4- 6P-2R28 () DF4- 7P-2R28 () DF4- 8P-2R28 () DF4- 9P-2R28 () DF4-10P-2R28 () DF4-11P-2R28 () DF4-12P-2R28 () DF4-13P-2R28 () DF4-14P-2R28 () DF4-15P-2R28 () Number of Contacts A B 06.0 08.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 32.0 02.0 04.0 06.0 08.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 Note : A packaging quantity is delivered in the bag unit (100 pcs.). If needed, please order the product per bag.

Type Part Number Objective Connector Remarks DF3-DF4 Table Insulation SA701/DF3 DF3- *S-2R** Desk top machine Displacement Machine 903-4507-7 DF4- *P/PA-2R** 1. Recommended Flow: 250ç for 3 seconds 1. Soldering Condition Manual soldering: 290ç for 2 seconds I If the cable neighboring the connector is bent and unstraightened, secure a large bending radius because the Jacket will be broken by the solder heat and the contact wire will be exposed.The Jacket in this part will be tore. I After the soldering process. If a stress is applied to the cable in the state where the connector and the cable has heat inside, the Jacket hold area will be loosen. Therefore, carry out the post-soldering operation after the connector has returned to the room temperature.. 2. Cleaning Condition Refer to Nylon Connector Use Hand book. Don't use a solvent such ass trichloroethylene which invades the cable Jacket. In addition, avoid heat cleaning by a solvent. 3. Connection Condition Refer to the Nylon Connector Use Hand book.