DF19G-20S-1C

DF19G-18P-1H HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

2000.5 /,/,/,/, /,/,/,/,/,/,/,/,/, /,/,/,/,/, /,/,/,/, /,/,/,/,/, /,/,/,/,/,/,/, /,/,/,/, /,/, /,/, /,/,/,/,/, /,/, /,/, /,/, /,/,/,/, Drawing of mated connectors on a DF19G - *P-1H board /,/, /,/, /,/,/,/,/,/,/, /,/,/,/,/,/, /,/,/,/,/,/, /,/,/,/,/, /,/,/,/, /,/, /,/, /,/, /,/,/,/,/,/,/, /,/,/,/, /,/,/,/, /,/,/,/, For connection of cables On-board type Offset type Reverse offset type For connection of FPC For connection of fine coaxial cables /,/, /,/,/,/,/,/,/, /,/, /,/,/,/,/, /,/,/,/, /,/, /,/, /,/, /,/,/,/,/,/,/, /,/,/,/,/,/,/, /,/,/,/, /,/,/,/, /,/,/,/, /,/, /,/, /,/, /,/, /,/, /,/,/,/,/,/,/, /,/,/,/, /,/, /,/,/, /,/,/,/, /,/, /,/,/,/,/,/,/, /,/,/,/, /,/, /,/, /,/,/,/, /,/,/,/, /,/,/,/, /,/,/,/, n Features 1. Ultra Low Profile FPC type: Max. 1.7 mm thick Discrete Wire & Coaxial 1.5 mm thick 2. SMT HEADERS Suit all Sockets Each header can connect to three different sockets (cable, FPC, and fine coaxial cable type. (Note: Fine coaxial cable type is under development.) 3. Standardised Outer Dimensions The three sockets have the same outside dimensions to allow complete Flexibility. 4. Many Variations There are headers of the on-board, offset, and reverse offset types to accommodate all designs. 5. Connection to a Metal GROUND Plate Ground lines can be connected to a metal shell for shielding. n Application LCDs, notebook personal computers, small OA machines, and small consumer products 1 mm-Pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable. Drawing of mated connectors on a DF19K- *P-1H board Drawing of mated connectors on a DF19L- *P-1H board Drawing of mated connectors on a DF19KR- *P-1H board

AWG#28 : 1A AWG#30 : 0.5A AWG#32 : 0.3A FPC : 0.5A Fine coaxial cable AWG# 40: 0.3A AC100V Operating temperature range Operating humidity range Storage temperature range Storage humidity range -35~85 Note 1 -35~85 Note 2 -20~80% -10~60 Note 2 -40~70% Measure at DC100V. 300 V AC, applied for one minute. Measure at 100 mA. Measure with a steel pin with thickness of 0.2±0.005. Frequency: 10 Hz to 55 Hz, amplitude of 0.75 mm in 3 directions, 2h Temperature of 40±2ÐC, humidity of 90% to 95%, duration 96h (-55-C: 30 min -> 5-C to 35-C: 10 min -> 85-C: 30 min -> 5-C to 35-C: 10 min ) 5 cycles 50 mechanical-operation cycles Reflow: At the recommended temperature profile, manual soldering: iron temperature 300-C for 3s 500MW or more No flashover or breakdown 30mW or less (50mW or less for FPC) M IN 0.2N(20gf), MAX 3N (300gf) No electrical discontinuity for 1µs or more Contact resistance: specified value or less, insulation resistance: 500MW or more Contact resistance: specified value or less, insulation resistance: 500MW or more Contact resistance: specified value or less No melting of resin portion, which affects performance 1.Insulation resistance 2.Voltage proof 3.Contact resistance 4.Insertion-Extraction Force (per Contact) 5.Vibration 6.Damp heat 7.Temperature Cycling 8.Mechanical operation 9.Resistance to soldering heat Item Specification Conditions Note1: Tinning is Whisker free UL standard UL94V-0 UL94V-0 UL94V-0 UL94V-0 Product Part Material Color / Finish Pin header Socket Crimp-Contact FPC socket Ground plate for FPC Socket for fine coaxial cables Ground plate for fine coaxial cables Insulation Terminal Ground Plate Insulation Ground Plate Terminal Insulation Terminal Ground Plate Insulation Terminal Ground Plate Ground Plate Polyamide resin Phosphor bronze Phosphor bronze Polyamide resin Stainless steel Phosphor bronze Polyamide resin Phosphor bronze Stainless steel LCP resin Phosphor bronze Phosphor bronze Phosphor bronze Grey Selective Gold Plating Tin Plated Grey Tin Plated Gold Plated Grey Selective Gold Plating Tin Plated Grey Selective Gold Plating Tin Plated Tin Plated Note1: Includes the temperature rise due to current flow. Note2: The term storage refers to unused products prior to PCB mounting that is being stored for long periods. The operating temperature and humidity range are applicable to connectors not carrying current. After PCB assembly or temporary storage during transportation. Note3: The aforementioned specifications are representative of this series. For information on specific parts, confirm with Sales Office.

n Part Number Construction 1 4 5 62 3 7 DF 19 # -** S - 1 F - GND 1 4 5 62 3 7 8 Series Name : DF Profile : n Pin header G : On-board type (1.65 mm from the board) K : Offset type (1.0 mm from the board) L : Offset type (1.1 mm from the board) KR : Reverse offset type of DF19K (1.0 mm from the board) n Crimp socket None : Without grounding shell G : With grounding shell (protected for EMI) n FPC socket G : Specification for connection with ground shell n Ground plate for FPC G : Specification for connection with ground shell n Socket for coaxial fine cables G : Specification for connection with ground shell n Ground plate for fine coaxial cables G : Specification for connection with ground shell 1 Number of contacts: 8,14,20,30... (Note 1) Series No. : 19 5 Connector type S : Single row socket P : Single row pin header Contact pitch : 1mm Wiring type / terminal profile H : Right angle SMT C : Crimp socket F : FPC socket SD : Socket for fine coaxial cables Part for installation GND : Ground plate (Note 2) (Note 1) Be careful, as the number of contacts differ depending on the profile. (Note 2) The FPC and coaxial fine cable types always use a ground plate. Symbol 2830 : AWG#28 ~30 3032 : AWG#30 ~32 Type SCF : Socket contact reel Packaging Plating A : Gold plating Specification None : 10 000 pieces per reel 41 : 20 000 pieces per reel The type name DF19 represents a specific product specification. To order a product, specify the type from pages 4 to 9. l Connector l Terminal

n Right Angle Pin Header (SMT) (On-board Type) BRecommended PCB Layout Note1: Masked area (hatched). Pattern in this area must be protected by resist. Specification No.* *, (* *) (59): Gold plating, Tape and reel packaging HRS No.Product No. Number of poles A B C Width of emboss Remarks CL685-0021-0-* * CL685-0004-0-* * CL685-0006-6-* * CL685-0015-7-* * DF19G- 18P-1H (* *) DF19G-14P-1H (* *) DF19G-20P-1H (* *) DF19G-30P-1H (* *) 11.55 17.55 23.55 33.55 11.95 17.95 23.95 33.95 1.65 mm from the board Unit: mm Assembled Header Note1: Specify the number of reels to order tape and reel packaging (1 000 pieces per reel).

Specification No.* *, (* *) (59): Gold plating n Right Angle Pin Header (SMT) (Offset Type) BRecommended PCB Layout Unit: mm HRS No.Product No. Number of poles A B C D E Width of emboss Remarks CL685-0008-1-* * CL685-0032-6-* * DF19K-20P-1H (* *) DF19K-30P-1H (* *) 23.55 33.55 26.55 36.55 24.15 34.15 25.15 35.15 1.0 mm from the board HRS No.Product No. Number of poles A B C D E Width of emboss Remarks CL685-0003-8-* * CL685-0019-8-* * CL685-0016-0-* * DF19L-14P-1H (* *) DF19L-20P-1H (* *) DF19L-30P-1H (* *) 17.55 23.55 33.55 20.55 26.55 36.55 18.15 24.15 34.15 19.15 25.15 35.15 1.1 mm from the board Note1: Specify the number of reels to order tape and reel packaging (1 000 pieces per reel). Assembled Header

n Right Angle Pin Header (SMT) (Reverse Offset Type) n Recommended PCB Layout Unit: mm HRS No.Product No. Number of poles A B C D E Width of emboss Remarks CL685-0024-8-* * CL685-0023-5-* * DF19KR-14P-1H (* *) DF19KR-20P-1H (* *) 17.55 23.55 20.55 26.55 18.15 24.15 19.15 25.15 1.0 mm from the board Specification No.* *, (* *) (59): Gold plating Note1: Specify the number of reels to order tape and reel packaging (1 000 pieces per reel). Assembled Header

n Single Row Socket (Discrete Wire) n Socket Crimp Contact Specification No. * * ,(* *) None: 1 Reel 10,000 pieces per reel (41) : 1 Reel 20,000 pieces per reel HRS No.Product No. Type Quantity Color / Finish 685-0001-2- 685-0002-5-41 DF19-2830SCF (* *) DF19-3032SCF (* *) Reel terminal Reel terminal 10,000 pieces per reel 20,000 pieces per reel Gold plating Gold plating Applicable wire size (core wire composition) Sheath diameter AWG#28 (7 strands/0.127 mm) AWG#30 (7 strands/0.1 mm) AWG#32 (7 strands/0.08 mm) ¯0.5 ~¯ 0.6mm Product No.Type HRS No. AP105-DF19S CM-105 HT302/DF19S Applicator Press Manual crimping tool CL901-4571-3 CL901-0005-4 CL550-0284-7 Note1: Product is not guaranteed when non-specified tools are used. Note2: Terminals are cut for manual crimping tool use. Note1: Please contact us when you use wires other than those specified in the table. l Applicable Wire (tinned soft conductor) l Recommended Crimp Tooling l Recommended Wire l UL1571 l Strip Length l 1.2~1.9mm Assembled Socket DF19-*S-1C DF19G- *S-1C Specification No. * * ,(* *) None: 1 pack (100 pieces) Note1: Products are sold in bulk packs. To order, specify the number of packs (100 pieces per pack). Product No. Number of poles A BHRS No. Product No. Number of poles A BHRS No. CL685-0029-1-* * CL685-0012-9-* * CL685-0011-6-* * CL685-0013-1-* * DF19 - 8S-1C(* *) DF19 -14S-1C(* *) DF19 -20S-1C(* *) DF19 -30S-1C(* *) 11.5 17.5 23.5 33.5 CL685-0022-2-* * CL685-0005-3-* * CL685-0007-9-* * CL685-0014-4-* * DF19G - 8S-1C(* *) DF19G -14S-1C (* *) DF19G -20S-1C (* *) DF19G -30S-1C (* *) 11.5 17.5 23.5 33.5 Unit: mm

n Single Row Socket (For FPC Cable) /,/,/, /,/,/, /,/,/, /,/,/, /,/,/, /,/,/, /,/,/, /,/,/, /,/, /, /, /, /, /,/, /,/, /,/, /,/, /,/, /,/,/, /, /, /, /, /, /, /,/,/, /,/, /,/, /,/, /,/, /,/,/,/,/,/,/,/, /,/,/,/,/,/,/,/, /,/,/,/,/,/,/,/, /,/,/,/,/,/,/,/, /,/,/,/,/,/,/,/, /,/,/,/,/,/,/,/, Note1: Wiring of FPC requires a socket and a ground plate. n Ground Plate for FPC Type HRS No. Desk-top tool (for 14 core wires) Desk-top tool (for 20 core wires) Desk-top tool (for 30 core wires) CL902-4514-6 CL902-4513-3 CL902-4518-7 Product No. DF19G-14S/PR-MD2 DF19G-20S/PR-MD2 DF19G-30S/PR-MD2 Note1: Product is not guaranteed unless Hirose approved tools are used. Note1:See page 12 for the assembling method. l Applicable Assembling Tools Assembled Socket Unit: mm HRS No.Product No. Number of Contacts A B C D E CL685-0017-2-* * CL685-0009-4-* * CL685-0033-9-* * DF19G-14S-1F (* *) DF19G-20S-1F (* *) DF19G-30S-1F (* *) 17.5 23.5 33.5 17.1 23.1 33.1 15.6 21.6 31.6 Note1: Products are sold in bulk packs. To order, specify the number of packs (100 pieces per pack). Specification No. * *, (* *) None: 1 pack (100 pieces) Unit: mm HRS No.Product No. Number of Contacts A B C CL685-0018-5-* * CL685-0010-3-* * CL685-0034-1-* * DF19G-14S-1F-GND (* *) DF19G-20S-1F-GND (* *) DF19G-30S-1F-GND (* *) 14.4 20.4 30.4 14.35 20.35 30.35 15.75 21.75 31.75 Note1: Products are sold in bulk packs. To order, specify the number of packs (100 pieces per pack). Specification No.* *,(* *) None: 1 pack (100 pieces)

n Single Row Socket (Fine Coaxial Cable) ... (Under development) Assembled Coaxial Socket Specification No.* *, (* *) None: 1 pack (100 pieces) l Applicable Wire (Fine Coaxial Cable) ... Planned Applicable wire size (core wire composition)Sheath diameter AWG#40 (7strands/0.03mm) ¯0.3 ~¯ 0.4mm Note1: The products will be sold in bulk packs (100 pieces per pack). To order, specify the number of packs. Product No. Number of poles HRS No. DF19G-14S-1SD (* *) DF19G-20S-1SD (* *)

BDrawing of Tape and Reel Dimensions (as per JIS-C-0806) l DF19G- *P-1H l DF19K- *P-1H l DF19L-*P-1H l DF19KR- *P-1H Insertion connectorNumber of Contacts A B C D E F Remarks DF19G - 18P-1H DF19G -14P-1H DF19G -20P-1H DF19G -30P-1H DF19K -20P-1H DF19K -30P-1H DF19L -14P-1H DF19L -20P-1H DF19L -30P-1H DF19KR-14P-1H DF19KR-20P-1H 40.4 40.4 50.2 40.4 52.4 40.4 40.4 52.4 40.4 40.4 11.5 20.2 20.2 26.2 20.2 26.2 20.2 20.2 26.2 20.2 20.2 16.1 22.1 28.1 38.1 28.1 38.1 22.1 28.1 38.1 22.1 28.1 24.4 44.4 44.4 56.4 44.4 56.4 44.4 44.4 56.4 44.4 44.4 30.4 50.4 50.4 62.4 50.4 62.4 50.4 50.4 62.4 50.4 50.4 On-board type (1.65 mm from the board) Offset type (1.0 mm from the board) Offset type (1.0 mm from the board) Reverse offset type of DF19K (1.0 mm from the board) Unit: mm

BSoldering Temperature Profile 1. Recommended temperature profile 2.Recommended manual soldering conditions 3. Recommended screen thickness 4. Warpage of board 5. Cleaning 6. Wiring 7. Precautions Soldering iron temperature 290 ±10, soldering time 3 seconds or less 0.15mm Max. 0.03mm at the connector center with the connector ends as the reference. See the separate ÒGuide to Hirose Nylon connectors.Ó See the separate ÒGuide to Hirose Nylon connectors.Ó n As crimp terminals are extremely small, crimping must be performed with care: observe the directions in the ÒCrimping Condition SheetÓ and ÒCrimping Standard Sheet.Ó n Due to the ultra miniature design care needs to be taken when disconnecting to avoid accidental damage. (Note 1) The temperature profile can be applied twice with the normal temperature profile. (Note 2) The temperature is measured at the connector lead.

BAssembly Procedure for FPC Socket /,/,/,/,/, /,/,/,/,/, /,/,/,/,/, /,/,/,/,/,/,/,/, /,/,/,/,/,/,/,/, /,/,/,/,/,/,/,/, /,/,/,/,/,/,/,/, /,/,/,/,/,/,/,/, /,/,/,/, /,/,/,/, /,/,/,/, /,/,/,/, /,/,/,/, /,/,/,/, /,/,/,/, /,/,/,/, /,/,/,/,/, /,/,/,/,/, /,/,/,/,/, /,/,/,/, /,/,/,/, /,/,/,/,/, /,/,/,/,/, /,/,/,/,/, /,/,/,/, /,/,/,/, /,/,/,/,/, /,/,/,/,/, /,/,/,/,/, /,/,/,/,/, /,/,/,/,/, /,/,/,/,/, /,/,/,/,/, /,/,/,/, /,/,/,/, /,/,/,/, /,/,/,/, Note8:To assemble the FPC to the socket, use the recommended jigs and tools and be careful not to be injured by the edge of the metallic part of the connector. Observe the instructions given in the manual for wiring jigs and tools. Note1:The ground plate and the socket are sold separately. Note2:Use the special tool for assembling. Note3:To insert the ground plate, lift the FPC about 30¡ to make a space for insertion. Don’t apply excessive force (bending or gouging, as the FPC copper foil (end of the cover film) will crack. Note4:If the ground plate doesn’t enter the socket, don’t apply excessive force, but check whether it is parallel with the socket. Note5:To protect the FPC, insert or pull out the connector in parallel with the engagement plane. Note6:To protect the FPC, don’t apply excessive tension. Note7:To bend the FPC, observe the allowable R and other conditions recommended by the manufacturer, and keep a distance between the bending point and the socket as shown in the illustration below. The contents of this catalog are current as of May 2000 Contents are subject to change without notice for the purpose of improvements.