DF19 HIROSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF19-*P-1V(56) DF19G-*S-1C(05) Receptacle DF19-*P-1V(56) Plug FPCDiscrete wire DF19G-*S-1SD(05) +DF19G-*S-1SD-GND 1.5±0.1 (1.7) 1.3±0.2 (0.78) (7.7) (7.7) (7.7) Micro-coaxial cable Small configuration and board space Horizontal mounting Vertical mounting 1.65 DF19G-*P-1H(54)FPC (1.7) 7.2 8.2 DF19G-*S-1F-GND(05) DF19G-*S-1F(05) PCB 1.5 8.2 7.2 DF19G-*P-1H(54)Cable DF19A-2830 / 3032 / 36SCFA PCBPlug 1.65 DF19 DF19 FPC Twisted pair cable DF19 DF19 Notebook PC Micro-coaxial cable ■Overview Industry and market accepted as “De facto” standard for LCD panel connections (panels under 12 inches). High-performance connectors for LVDS high-speed differential signals. ■Features 1. Small configuration and board space Thin design accepts discrete wire, thin micro-coaxial cable 2. Common use of receptacle The same receptacle will accept plugs terminated with discrete wire, FPC or micro-coaxial cable. 3. Uniform external dimensions The plug assembly external dimensions remain the same when is terminated with discrete wire, FPC or micro-coaxial cable. 4. Variety of mounting styles Device design engineers have a choice of mounting styles : top- board, offset, reverse mount offset and vertical. 5. Ground connection Metal grounding plates connect with the common ground line. 6. Glow wire compliance (Compliant with IEC60695-2-11) ■Applications LCD connections in small consumer devices : digital cameras, notebook computers, PDA’s. Any device requiring high-density interconnection for consistent high speed transmission data rates. Top-board mounting Offset mounting Reverse, offset mounting Vertical mounting Discrete wire FPC Micro-coaxial cable B253-265 DF19 16.5.25 15:42 ページ B253

DF19 Series●1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors ■Product Specifications ■Materials / Finish Rating Current rating Voltage rating

28 AWG : 1A

30 AWG : 0.9A 32 AWG : 0.8A 36 AWG : 0.5A FPC : 0.5A Micro-coaxial cable 40 AWG : 0.3A 100V AC Operating temperature range Operating humidity range Storage temperature range Storage humidity range -35ç to 85ç Note 1 -35ç to 85ç Note 2 -20% to 80% -10ç to 60ç Note 2 -40% to 70%

100 V DC

300 V AC / one minute

Measured with a steel pin Ø0.2±0.005 Frequency : 10 to 55 Hz, single amplitude of 0.75mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40±2ç and humidity of 90% to 95% Temperature : –55ç ➝ +5ç to +35ç ➝ +85ç ➝ +5ç to +35ç Time (Minutes) : –30 ➝ +10 ➝ +30 ➝+10 5 cycles 30 cycles Re-flow soldering : At the recommended temperature profile Manual soldering : Soldering iron temperature 300ç, 3 seconds 500Mø min. No flashover or insulation breakdown. 30mø max. (50mø max. for FPC) Min. 0.2N, Max. 3N No electrical discontinuity of 1μs or more. Contact resistance : 30mø max. (50mø max. for FPC) Insulation resistance : 500Mø min. Contact resistance : 30mø max. (50mø max. for FPC) Insulation resistance : 500Mø min. Contact resistance : 30mø max. (50mø max. for FPC) No deformation of the insulator parts affecting performance. Item Specification Conditions Remarks UL94V-0 UL94V-0 UL94V-0 Product Component Material Finish/Color Receptacle Plug Crimp contact Plug for PPC Grounding plate for PPC Plug for micro-coaxial cable Grounding plate for micro-coaxial cable Insulator Contacts Grounding plate Insulator Tin-lead plated Contact Insulator Contact Grounding plate Insulator Contact Grounding plate Grounding plate Polyamide Phosphor bronze Phosphor bronze Polyamide Stainless steel Phosphor bronze Polyamide Phosphor bronze Stainless steel LCP Phosphor bronze Phosphor bronze Phosphor bronze Black or Beige Gold plated Tin plated or Tin-copper plated Beige Tin-copper plated Gold Plated Beige Gold plated Tin-copper plated Beige Gold plated Tin plated Tin plated Note1 : Includes temperature rise caused by current flow. Note2 : The term “storage” refers to connectors stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation. 1.Insulation resistance 2.Withstanding voltage 3.Contact resistance 4.Insertion-Extraction force (per contact) 5.Vibration 6.Humidity (Steady state) 7.Temperature cycle 8.Durability (insertion/ withdrawal) 9.Resistance to soldering heat B253-265 DF19 16.5.25 15:42 ページ B254

DF19 Series●1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF19 # - ** S - 1 F - GND ■Product Number Structure 1 3 4 52 6 3 4 52 61 7 Series Name : DF19 Configuration ■Receptacle G: Top-board mounting (1.65mm high) K : Offset mounting (1.0mm high) L : Offset mounting (1.1mm high) KR : Reverse offset mounting version of DF19K (1.0mm high) ■Plug for discrete wire Blank : No grounding plate G : With grounding plate ■Plug for FPC G : With grounding plate ■Grounding plate for FPC G : With grounding plate ■Plug for micro-coaxial cable G : With grounding plate ■Grounding plate for micro-coaxial cable G : With grounding plate

1 Number of contacts : 8,14,20,30 (Note 1)

4 Connector type

S : Plug P : Receptacle Contact pitch : 1mm Mounting type/Termination type H : Horizontal SMT V : Vertical SMT C : Plug – discrete wire (crimp contact) F : Plug – FPC SD : Plug – micro-coaxial cable Additional separate component GND : Ground plate (Note 2) Note 1 : Number of contacts will differ depending on the connector style. Note 2 : Grounding plates are required when terminating with the FPC and micro-coaxial cable. Conductor size 2830 : 28 to 30 AWG 3032 : 30 to 32 AWG 0036 : 36 AWG Contact type SCF : Plug contact, tape and reel packaging Plating A : Gold Packaging Blank : 10,000 pcs/reel (41) : 20,000 pcs/reel

  • Connector DF19A - 2830 SCF A ( )
  • Contact Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. B253-265 DF19 16.5.25 15:42 ページ B255

DF19 Series●1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors ■Right angle receptacle, top-board mounting BPCB mounting pattern 2.5±0.05 1.1 +0.1 0.55±0.05P=1±0.05 Outline of the receptacle No conductive traces 2.5 +0.1 +0.1 5.7 1.65 A 2.375 B 2.175 P=1 0.25 2.452 4.7 C Contact No. 1 indicator 1.65 Specification (54) : Tape & reel packaging (1,000 pcs/reel) HRS No.Part No. No. of contacts A B C Remarks RoHS 685-0021-0 54 685-0004-0 54 685-0006-6 54 685-0015-7 54 DF19G-18P-1H (54) DF19G-14P-1H (54) DF19G-20P-1H (54) DF19G-30P-1H (54) 11.55 17.55 23.55 33.55 11.95 17.95 23.95 33.95 1.65mm high YES Unit : mm Note : Order by number of reels. B253-265 DF19 16.5.25 15:42 ページ B256

DF19 Series●1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors Specification (54) : Tape & reel packaging (1,000 pcs/reel) ■Right angle receptacle, offset mounting BPCB mounting pattern E±0.1 0.3 +0.1 D +0.2 -0.1 0.55±0.05 P=1±0.05 2.5 +0.1 5.5±0.1 1.5 +0.1 0.3 5.3±0.1(2.2) Outline of the receptacle Outline of the plug F 1.46 0.25 C Contact No. 1 indicator P=1 B2.375 2.175 A 2.452 4.7 6.7 F DF19K identification indicator Unit : mm HRS No.Part No. No. of contacts A B C D E F Remarks RoHS 685-0008-1 54 685-0032-6 54 DF19K-20P-1H (54) DF19K-30P-1H (54) 23.55 33.55 26.55 36.55 24.15 34.15 25.15 35.15 0.1 0.1 1.0mm high YES HRS No.Part No. No. of contacts A B C D E Remarks RoHS 685-0003-8 54 685-0019-8 54 685-0016-0 54 DF19L-14P-1H (54) DF19L-20P-1H (54) DF19L-30P-1H (54) 17.55 23.55 33.55 20.55 26.55 36.55 18.15 24.15 34.15 19.15 25.15 35.15 1.1mm high YES Note : Order by number of reels. F 1.1 1.1 1.1 B253-265 DF19 16.5.25 15:42 ページ B257

DF19 Series●1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors ■Right angle receptacle, reverse offset mounting BPCB mounting pattern 0.3 0.55±0.05 P=1±0.05 2.5 +0.1 5.5±0.1 1.5 +0.1 +0.1 5.3±0.1 0.3 (2.2) D +0.2 -0.1 E±0.1 Outline of the receptacle Outline of the plug 1.46 2.375 B 2.175 A P=1 0.25 2.45 4.7 C 6.7 Contact No. 1 indicator Unit : mm HRS No.Part No. No. of contacts A B C D E Remarks RoHS 685-0024-8 54 685-0023-5 54 DF19KR-14P-1H (54) DF19KR-20P-1H (54) 17.55 23.55 20.55 26.55 18.15 24.15 19.15 25.15 1.0mm high YES Note : Order by number of reels. Specification (54) : Tape & reel packaging (1,000 pcs/reel) B253-265 DF19 16.5.25 15:42 ページ B258

DF19 Series●1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors BPCB mounting pattern 2.2±0.05 G±0.05 1.5 1.45 0.65±0.05 P=1±0.05 0.55±0.05 0.8±0.05 1.7 0.65 2.5 +0.1 +0.1 1.46±0.05 D±0.05 +0.1 +0.1 +0.1 (F)(E) Outline of the plus A 5.22 1.56A 0.25 3.8 1.96 1.120.95 B 1.3 0.25P=1 1.07 Contact No. 1 indicator Unit : mm HRS No.Part No. No. of contacts A B C D E 685-0036-7 56 685-0037-0 56 DF19-14P-1V (56) DF19-20P-1V (56) 17.9 23.9 15.25 21.25 14.95 20.95 Note : Order by number of reels. Conductive traces in this area must be covered by dielectric compound. Specification (56) : Tape & reel packaging (1,000 pcs/reel) ■ Vertical receptacle G RoHSF 6.675 9.675 6.325 9.325

19 YES

B253-265 DF19 16.5.25 15:42 ページ B259

DF19 Series●1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors ■Plug (Discrete wire) ■Crimp contacts HRS No.Part No. Packaging Quantity Finish RoHS 685-0048-6 685-0046-0 685-0047-3 ** DF19A-2830SCFA (* *) DF19A-3032SCFA (* *) DF19A-3336SCFA (* *) Tape & reel See Specifications number below Gold plated YES Wire size (stranded wire conductor) Jacket diameter 28 AWG (7/ 0.127mm) 30 AWG (7/ 0.1mm) 32 AWG (7/ 0.08mm) 36 AWG (7/ 0.05mm) 0.5mm to 0.6mm 0.27mm Part No.Part HRS No. AP105-DF19S CM-105C Applicator Press unit 901-4571-3 901-0001-0 A A B P=1 6.11.5 B Contact No. 1 indicator No. of contacts indicator Contact No. 1 indicator Contact No. 5 and multiples indicatorContact No. 5 and multiples indicator Contact No. 1 indicator A P=1 6.11.5 A 0.7 0.63 5.1 0.9 0.5 t=0.15 Carrier strip Note 1 : Use of other than Hirose Electric approved tools will void the product warranties. Note 2 : Contact Hirose for the wire striping, contact crimp and contact insertion instructions. Note 3 : Please do the crimping operations according to the "Crimping quality standard" and "Crimping condition table". Note 1 : When using other than the recommended wire, contact your Hirose sales representative. Note 2 : Contact your Hirose sales representative when using 36 AWG.

  • Applicable cable (Tin plated annealed conductor)
  • Tools
  • Applicable UL style
  • UL1571(thin type) (Note2)
  • Strip length
  • 1.2mm to 1.9mm Shown with terminated and installed contacts DF19-*S-1C DF19G- *S-1C(05) Note: Order by number of bags. 685-0029-1 685-0012-9 685-0011-6 685-0013-1 DF19 -18S-1C DF19 -14S-1C DF19 -20S-1C DF19 -30S-1C 11.5 17.5 23.5 33.5 YES 685-0022-2 05 685-0005-3 05 685-0007-9 05 685-0014-4 05 DF19G -18S-1C(05) DF19G -14S-1C(05) DF19G -20S-1C(05) DF19G -30S-1C(05) 11.5 17.5 23.5 33.5 YES Unit : mm Specification Blank,(05) : Bag packaging (100 pcs/pack) Specification number * *(* *) Blank : Tape & reel packaging (10,000 pcs/reel) (41) : Tape & reel packaging (20,000 pcs/reel) B253-265 DF19 16.5.25 15:42 ページ B260

DF19 Series●1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors ■Plug (Flat Printed Circuit) Note: Socket and grounding plate is required. A A B C 1.2 P=1 5.95 CAV No. Polarizing mark indicator ■Ground plate for FPC SIGNAL D B A Contact No. 1 indicator No. of contacts indicator 1.5 C 4.1 14 Type HRS No. Desktop tool (for 14 pos.) Desktop tool (for 20 pos.) Desktop tool (for 30 pos.) 902-4514-6 902-4513-3 902-4518-7 Part No. DF19G-14S/PR-MD2 DF19G-20S/PR-MD2 DF19G-30S/PR-MD2 Note1 : Product is not guaranteed unless Hirose approved tools are used.

  • Grounding plate installation tools Shown terminated with FPC Unit : mm HRS No.Part No. No. of contacts A B C D E RoHS 685-0017-2 05 685-0009-4 05 685-0033-9 05 DF19G-14S-1F(05) DF19G-20S-1F(05) DF19G-30S-1F(05) 17.5 23.5 33.5 17.1 23.1 33.1 15.6 21.6 31.6 YES Note : Order by number of bags. Note : Order by number of bags. R0.1±0.05 0.3±0.15 Ground area < :1 to 5μm thick solder plated> 1.85±0.25 0.2±0.15 0.35±0.25 2±0.15 0.45±0.3 R0.2 (0.35) MAXR0.2 MAXR0.2 R0.2 0.05 0.05 0.2±0.1 2.2±0.05 0.7±0.03 P=1±0.03 C±0.05 D±0.08 3.6 0.4±0.05 0.35±0.03 E±0.05 Signal area < :1 to 5μm thick solder plated> Specification (05) : Bag packaging (100 pcs/pack) Specification (05) : Bag packaging (100 pcs/pack) Unit : mm HRS No.Part No. No. of contacts A B C D RoHS 685-0018-5 05 685-0010-3 05 685-0034-1 05 DF19G-14S-1F-GND(05) DF19G-20S-1F-GND(05) DF19G-30S-1F-GND(05) 15.75 21.75 31.75 14.35 20.35 30.35 17.5 23.5 33.5 14.4 20.4 30.4 YES B253-265 DF19 16.5.25 15:42 ページ B261

DF19 Series●1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors

  • Applicable cable (Micro-coaxial cable) Part No. No. of contacts A B C D RoHSHRS No. 17.4 23.4 14.8 20.8

19 YES685-0026-3 05

Wire size (stranded wire center conductor) Jacket diameter 40 AWG (7/ 0.03mm) 0.3mm to 0.4mm Part No. No. of contactsHRS No. DF19G-14S-1SD-GND DF19G-20S-1SD-GND A RoHS 17.5

23.5 YES685-0028-9

Note : Order by number of bags. ■Plug (Micro-coaxial cable) Shown terminated with micro-coaxial cable ■Grounding plate for micro-coaxial cable Contact No. 1 indicator 6.1 A B P=1 1.33 D±0.15 C±0.2 0.7±0.05 0.9MAX 3±0.1 Solder coat 1.2MIN 0.55 -0.05 Inner conductor Insulator Outer conductor Jacket Cable preparation Grounding bar P=1±0.1 Contact No. 1 indicator 4.36 A 1.27 Note 1 : Connectors are designed to allow termination without cutting of the pitch loss prevention tape. Note 2 : Required Solder coating for inner conductor. Note 3 : When using 2-conductor micro-coaxial cable some contact positions will not be used. Contact your Hirose sales representative. DF19G-14S-1SD(05) DF19G-20S-1SD(05) Specification (05) : Bag packaging (100 pcs/pack) Specification Blank : Bag packaging (100 pcs/pack) Unit : mm B253-265 DF19 16.5.25 15:42 ページ B262

DF19 Series●1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors BEmbossed Carrier Tape Dimensions Receptacles

  • DF19G-*P-1H(54)
  • DF19K-*P-1H(54)
  • DF19L -*P-1H(54) Ø13 Ø21 Ø330 Ø80 D±0.3 A±0.3 B±0.1 C±0.1 (2.3) H G-G H-H G Unreeling direction 1.75±0.1512±0.1 4±0.12±0.1 H G 2.5±0.15 F 2±0.5 Part number label Depth of 1.5 diameter 7.8±0.3 E Ø1.5 +0.1
  • DF19KR-*P-1H(54) t=0.3±0.1 2.85±0.15 Ø13 Ø21 Ø330 Ø80 (2.3) 1.75±0.1C±0.1 B±0.1 A±0.3 G-G D±0.3 1.75±0.1512±0.1 7.8±0.3 H-H F 2±0.5 Part number label G G H H E Ø1.5 Unreeling direction Ø1.5 in the rear +0.1 Connector No. of contacts A B C D E F Remarks DF19G-18P-1H(54) DF19G-14P-1H(54) DF19G-20P-1H(54) DF19G-30P-1H(54) DF19K-20P-1H(54) DF19K-30P-1H(54) DF19L-14P-1H(54) DF19L-20P-1H(54) DF19L-30P-1H(54) 40.4 40.4 50.2 40.4 52.4 40.4 40.4 52.4 11.5 20.2 20.2 26.2 20.2 26.2 20.2 20.2 26.2 16.1 22.1 28.1 38.1 28.1 38.1 22.1 28.1 38.1 24.4 44.4 44.4 56.4 44.4 56.4 44.4 44.4 56.4 30.4 50.4 50.4 62.4 50.4 62.4 50.4 50.4 62.4 Top-board mounting (1.65mm high) Offset mounting (1.0mm high) Offset mounting (1.1mm high) Unit : mm
  • DF19-*P-1V(56) 3.7±0.2 Ø13 4±0.2 D±0.2 t=0.4±0.1 12±0.1 2±0.1 4±0.1 1.75±0.1C±0.1 B±0.1 A±0.3 Ø1.5 Unreeling direction G GH H Part number label Ø21 2±0.5 Ø80 Ø380±2 E F Depth of 1.5 diameter +0.1+0 Connector No. of contacts A B C D E F Remarks 40.4 40.4 20.2 20.2 22.1 28.1 44.4 44.4 50.4 50.4 Reverse type of DF19K Offset mounting (1.0mm high) Unit : mm DF19KR-14P-1H(54) DF19KR-20P-1H(54) Connector No. of contacts A B C D E F Remarks 28.4 40.4 14.2 20.2 18.2 24.2 32.4 44.4 38.4

50.4 Vertical receptacle

Unit : mm DF19-14P-1V(56) DF19-20P-1H(56) B253-265 DF19 16.5.25 15:42 ページ B263

DF19 Series●1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors BUse recommendations Manual soldering : 290±10ç for 3 seconds 0.15mm Maximum of 0.03mm at the connector center, with both ends of the connector as reference points. Refer to “Wire-to-Board Connector Use Handbook.” Refer to “Wire-to-Board Connector Use Handbook.” ■ Do not twist when mating/un-mating. Refer to “Wire-to-Board Connector Use Handbook.” 1. Recommendedtemperature profile 2. Manual soldering 3. Screen thickness 4. Board warpage 5. Cleaning conditions 6. Termination conditions 7. Cautions 8. Precautions Note 1 : Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2 : The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals. Note 3 : The product can be used without trouble though the surface of a grounding plate might discolor. Temperature(ç) 250ç 200ç 150ç 100ç 50ç 60 to 120(S) 250ç 10(s)max 220ç min 60(s)max Preheating 180 220 30 50 100 150 200 soldering TIME(S) B253-265 DF19 16.5.25 15:42 ページ B264

DF19 Series●1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors BPlug (FPC Type) Termination Procedures (Dedicated Assembly Tooling is required.) Assembly point: Slightly raise the FPC to an angle of about 30 degrees, and then insert the grounding plate over the socket. 1.7 Insert the FPC diagonally from the top surface of the grounding plate. Pass the FPC through the grounding plate. After passing through, lower the FPC (as shown) to horizontal position. Extend the FPC out and fully insert into the socket. Exercising caution slide the grounding plate forward and pre-insert it over the socket. Using the dedicated installation tool, insert the grounding plate. Step 1 Step 2 Step 4 Step 3 Final completion Signal surface Ground surface SIGNAL MIN 10 MIN 5 Note 7 : Follow the instruction manuals for the termination and assembly fixtures and tools. Note 1 : The grounding plate and the plug are supplied as separate components. Note 2 : Dedicated assembly fixtures are required at each stage of the termination process. For detail, refer to the instruction manual supplied with the tools. Note 3 : Do not apply excessive forces to FPC (Bending or twisting) as it may introduce cracks in the copper foil (on the cover film edge). Note 4 : To protect the FPC, insertion and disconnection of the connectors should be performed parallel to the mating direction. Note 5 : Do not apply excessive tension to FPC. Note 6 : Refer to FPC manufacturer for bend radius and other specific recommendation. Distance should be allowed for the bending position, as illustrated below. B253-265 DF19 16.5.25 15:42 ページ B265 Powered by TCPDF (www.tcpdf.org)