DF18140836B507T WALSIN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 13
Technical content
Page 1 of 13 ASC_ DF18140836B507T_V04 Feb. 2017 RF SAW Duplexer Series – RoHS Compliance LTE Band 5 system For TRx Single Type 824 ~ 849 / 869 ~ 894 MHz Band Working Frequency P/N：DF18140836B507T
Page 2 of 13 ASC_ DF18140836B507T_V04 Feb. 2017
Features
Low loss, Low pass band ripple Package for Surface Mount Technology (SMT) Electrostatic Sensitive Device (ESD) Ultra small package：(1.8mm × 1.4mm x 0.65mm) RoHS Compliance Moisture Sensitive Level 3 (MSL3) Application LTE Band 5 system Package Dimensions 0.65±0.07 0.3±0.07 0.65 Max1.8±0.1 [8] [5] [3] [6] [2] [7] [1] [5] [3] [6] [2] [7] [1] [4] Top View Side View Bottom View [8] [4] 1.4±0.1 0.25±0.07 0.075±0.07 0.625±0.07 0.5±0.070.25±0.07 Unit ：mm Marking Descriptions Marking Description W Walsin
5 Band Class
1 Series Number
X Date Code(Year+Month) Test Circuit 2, 4, 5, 7, 8 Ant Rx Tx 10.0 nH 2.2 nH 3.9 nH Pin Descriptions Pin Description Pin Description [1] Rx [5] GND [2] GND [6] Ant [3] Tx [7] GND [4] GND [8] GND W 5 1 X
Page 3 of 13 ASC_ DF18140836B507T_V04 Feb. 2017 Electrical Specifications (Tx to ANT) Item Frequency (MHz) Specification Unit Min Typ Max Tx to ANT Insertion loss 824 ~ 849 - 1.8 2.5 dB Pass band ripple 824 ~ 849 - 0.6 1.5 dBp-p VSWR Tx 824 ~ 849 - 1.65 2.0 - ANT - 1.6 2.0 - Absolute attenuation 10 ~ 420 35 40 - dB 420 ~ 494 35 39 - dB 494 ~ 701 35 39 - dB 699 ~ 716 35 43 - dB 701 ~ 728 35 43 - dB 704 ~ 716 35 43 - dB 728 ~ 764 35 41 - dB 764 ~ 804 25 31 - dB 860 ~ 869 5 22 - dB 869 ~ 894 44 49 - dB 1559 ~ 1563 33 38 - dB 1565 .42~ 1573.37 33 38 - dB 1573.37 ~ 1577.47 33 38 - dB 1577.47 ~ 1585.42 33 38 - dB 1597.55 ~ 1605.89 33 37 - dB 1683 ~ 1708 30 36 - dB 1710 ~ 1785 30 35 - dB 1844.9 ~ 1879.9 30 35 - dB 1884.5~ 1910.6 28 34 - dB 1920 ~ 1980 28 34 - dB 2110 ~ 2170 25 32 - dB 2400 ~ 2494 25 30 - dB 3286 ~ 3406 15 26 - dB 4110 ~ 4255 12 18 - dB 4900 ~ 5950 10 17 - dB 6582 ~ 6802 15 28 - dB 7406 ~ 7651 15 29 - dB
Page 4 of 13 ASC_ DF18140836B507T_V04 Feb. 2017 Electrical Specifications (ANT to Rx) Item Frequency (MHz) Specification Unit Min Typ Max ANT to Rx Insertion loss 869 ~ 894 - 1.9 2.5 dB Pass band ripple 869 ~ 894 - 0.8 1.5 dBp-p VSWR Rx 869 ~ 894 - 1.65 2.0 - ANT - 1.6 2.0 - Absolute attenuation 10 ~ 447 35 41 - dB 45 50 80 - dB 447 ~ 824 32 37 - dB 779 ~ 804 35 38 dB 824 ~ 849 47 53 dB 1693 ~ 1743 35 40 dB 1710 ~ 1785 35 40 - dB 1788 ~ 1788 35 40 - dB 1850 ~ 1920 35 40 - dB 1920 ~ 1980 35 41 - dB 1980 ~ 2400 35 41 dB 2305 ~ 2315 35 41 dB 2400 ~ 2500 35 42 dB 2467 ~ 2494 35 42 - dB 2517 ~ 2592 35 42 - dB 2607 ~ 2682 35 42 - dB 3476 ~ 3576 30 38 - dB 4345 ~ 4470 25 30 - dB 4900 ~ 5950 20 33 dB 5214 ~ 5364 25 38 dB 6083 ~ 6258 20 32 dB 6952 ~ 7152 15 24 - dB
Page 5 of 13 ASC_ DF18140836B507T_V04 Feb. 2017 Electrical Specifications (Tx to Rx) Note：With matching network (Ref. testing environment circuit as shown above). Absolute Maximum Ratings Item Rating Unit DC permissive voltage 0 V Maximum input power 29 dBm Operating temperature range -20 ~ +85 ℃ Storage temperature range -40 ~ +85 ℃ Item Frequency (MHz) Specification Unit Min Typ Max Tx to Rx Isolation 824 ~ 849 50 54 - dB 869 ~ 894 48 52 - dB 1574 ~1577 40 62 - dB 1683 ~ 1708 20 62 - dB 2462 ~ 2557 20 66 - dB Terminating impedance Tx port (Single-ended) 50 Ohm Rx port (Single-ended ) 50 Ohm Ant port (Single-ended) 50 Ohm
Page 6 of 13 ASC_ DF18140836B507T_V04 Feb. 2017 Typical Frequency Response Tx to Ant Ant to Rx
Page 7 of 13 ASC_ DF18140836B507T_V04 Feb. 2017 Ripple Deviation Isolation
Page 8 of 13 ASC_ DF18140836B507T_V04 Feb. 2017 VSWR & Smith chart (Tx Port) VSWR & Smith chart (Rx Port)
Page 9 of 13 ASC_ DF18140836B507T_V04 Feb. 2017 VSWR & Smith chart (ANT Port) Wide Span( Tx ) Tx
Page 10 of 13 ASC_ DF18140836B507T_V04 Feb. 2017 Wide Span( Rx & Iso ) Rx ISO
Page 11 of 13 ASC_ DF18140836B507T_V04 Feb. 2017 Solder Land Pattern 0.25 0.25 0.25 0.525 0.35 0.525 1.6 Unit:mm Land Pattern Package Outline 0.925 Reliability Test Test Procedure/Test method Requirements Vibration *Frequency：10Hz ~ 55Hz *Total amplitude：1.5mm *Sweep period：1.0 minute *Vibration directions：3 mutually perpendicular *Duration：2 hours / direct After the test, specimen would be kept at room temperature for 2 hours. And then the measured values shall fulfill the Electrical Specifications. Drop test *Height：1.0 m *Test surface：Rigid surface of concrete or steel *Times：10 times Static humidity *Relative humidity：90% *Duration：96 hours Temperature cycling 1. 30 minutes at -40℃, ： 2. 30 minutes at +85℃, ： *cycle time：100 times： High temperature exposure *Exposure temperature：85℃ 5℃ *Exposure duration：240 hours Low temperature exposure *Exposure temperature：-40℃ 5℃ *Exposure duration：240 hours Reflow soldering *Temperature / Duration：275℃ / 10sec *Total time：6 minute (IR-reflow)
Page 12 of 13 ASC_ DF18140836B507T_V04 Feb. 2017 Soldering Condition Ordering Code DF 1814 0836 B5 07 T Series DF:Single SAW Duplexer Dimension code Per2 digits of Length, Width 1814= Length 1.8mm Width 1.4mm Frequency 836：Center Freq (836MHz) Application B5：LTE Band 5 Serial Number Design Code Packing T：Reeled Packing w F E Ao PoP2P1 Bo D T Plastic Tape specifications Index Ao Bo D T W Index E F Po P1 P2 W 5 1 X W 5 1 X W 5 1 X W 5 1 X W 5 1 X
Page 13 of 13 ASC_ DF18140836B507T_V04 Feb. 2017 Reel Dimensions A B C Index A B C Note：The product shall be packed properly not to be damaged during transportation and storage. Taping Quantity：3000 pieces per 7”reel Caution Of Handling Limitation of Applications Please contact us before using our products for the applications listed below which require especially high reliability for t he prevention of defects, which might directly cause damage to the third party’s life, body or property. (1) Aircraft equipment (2) Aerospace equipment (3) Undersea equipment (4) Medical equipment (5) Disaster prevention / crime prevention equipment (6) Traffic signal equipment (7) Transportation equipment (vehicles, trains, ships, etc.) (8) Applications of similar complexity and /or reliability requirements to the applications listed in the above. Storage Condition (1) Products should be used in 6 months from the day of WALSIN outgoing inspection, which can be confirmed. (2) Storage environment condition. Products should be storage in the warehouse on the following conditions. Temperature : -10 to +40°C Humidity : 30 to 70% relative humidity Don’t keep products in corrosive gases such as sulfur. Chlorine gas or acid or it may cause oxidization of electrode, resulting in poor solderability. Products should be storage on the palette for the prevention of the influence from humidity, dust and son on. Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on. Products should be storage under the airtight packaged condition. Important Notes (1) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. (2) Cleaning agent isopropyl alcohol and ethyl alcohol can be used. (3) As rapid temperature change for cleaning after reflow soldering might be a cause of degradation or destruction, clean this component after confirming that temperature of this component goes down to room temperature. (4) As ultrasonic vibration might be a cause of degradation or destruction, do not use ultrasonic cleaning. (5) This device follows JEDEC standards for moisture classifications. The following this device is classified as Moisture Sensitive Level 3 This device is moisture sensitive and need to be handled within proper MSL 3 guidelines to avoid damage from moisture absorption and exposure to solder reflow temperatures that can result in yield and reliability degradation (6) This is an Electrostatic Sensitive Device. Please avoid static voltage during operation and storage. (7) Sudden change of temperature shall be avoided, deterioration of the characteristics can occur. (8) If any malfunction due to designing or manufacturing which is out of specification occurs within one year after the products have been delivered, the maker should exchange the defective products.