DF17-26DS-0.5V HIROSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
0.5mm Pitch Board to Board Connector DF17 Series I Features Solution of Connector Damage Caused when Mobile Phone is Dropped DF17 series are the connector which has been developed mainly for the mobile phone. Connector Problems Involving in Mobile phone Example: The following problems can be solved; "Connector Damage Caused when Mobile phone is Dropped" "Electrical Discontinuity in Printed Circuit Board is Fixed (Fastened by screws)" Especially, in regard to the resistance to the drop shock, Hirose has developed a new connector structure utilizing its unique technology, and greatly enhanced the resistance to the drop shock. In broad variation development, the connector can be utilized in wide fields of LCD equipment, miniature information terminal equipment and so on, in addition to mobile phones.
- Performance Enhancement The receptacle is designed in a BOX structure and has also enhanced shock-proof, pinch-proof and scoop-proof performance. In addition, the receptacle contact has employed the high scoop-proof bellows type. 3. With Metal Fitting available In order to grade up the strength against the mechanical stress, the metal fitting specification is also available. 4. Broad Variations in Contact Number The connectors are lined up per 10 contacts between 20 and 80 contacts to take countermeasures for multi-signalization. 5. Stacking Height 4 to 8mm The stacking height can be selected (per milimeter) between 4mm and 8mm in combination of the receptacle with the header. I Applications Mobile phones, LCD, miniature equipment and so on Note : The stacking height doesn't include the solder paste thickness. 6.5 5.5 26 30 40 50 60 70 80 100 (Contacts) Stacking (mm) : Available : Under plan DF17#(M)-*DP-0.5V 2.0 2.5 4.0 3.0 4.0 5mm 5.5mm 7mm 6mm 6.5mm 8mm DF17#(M)-*DS-0.5V DF17(1.0H)-*DP-0.5V Header Receptacle DF17(3.0H)-*DS-0.5V 4mm Header Receptacle
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% (-55ç: 30 minutes 5 to 35ç: 10 minutes 85ç: 30 minutes 5 to 35ç: 10 minutes) 5 cycles 50 cycles Reflow: At the recommended temperature profile Manual soldering: 300ç for 3 seconds 500M ohms min. No flashover or insulation breakdown. 60m ohms max. No electrical discontinuity of 1µs or more Contact resistance: 60m ohms max Insulation resistance:250M ohms min Contact resistance: 60m ohms max:Insulation resistance: 500M ohms min Contact resistance: 60m ohms No deformation of components affecting performance. 1.Insulation Resistance 2.Withstanding voltage 3.Contact Resistance 4. Vibration Humidity (Steady state) 6.Temperature Cycle 7. Durability (Mating/un-mating) 8. Resistance to Soldering heat Item Specification Condition I Product Specifications Rating Current rating Voltage rating 0.3A 50V AC Operating Temperature Range Operating Humidity Range Storage Temperature Range Storage Humidity Range -10 to 60ç(Note 2) 40 to 70% -35 to 85ç(Note 1) 40 to 80% Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature R ange and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note1: DF17(0.3)-*DS-0.5V : Contact area: gold plating/lead area: flash gold plated DF17(4.0)-*DS-0.5V : Contact area: gold plating/lead area: tin-lead plated DF17(4.0)-*DP-0.5V : Contact area: gold plating/lead area: tin-lead plated Note2: The header gold plated product:Contact area: gold plating/lead area: tin-lead plated DF17(1.0H)-*DS-0.5V only: Contact area: gold plating/lead area: flash gold plated I Material Product Part Receptacle Header Insulator Contact Metal Fitting Insulator Contact Metal Fitting Polyamide Phosphor copper Phosphor copper Polyamide Phosphor copper Phosphor copper White Gold plated (Note 1) Tin-lead plated White Gold plated (Note 2) Tin-lead plated UL94V-0 UL94V-0 Material Finish Remarks BOrdering Information Please determine the specific product. If needed, please select and orderproducts from the product No. as listed on catalog page A322~A325. 1 2 3 4 5 6 87 G Receptacle/Header Product height The stacking height can be determined by adding the figures in parentheses to receptacle and header. Number of Contacts 20,26,30,40,50,6,70,80contacts Connector Type DS: Receptacle DP: Header Contact Pitch: 0.5mm Contact Type V: Straight SMT Packaging Type (50): Gold plated, embossed tape packaging (51): Gold plated, tube packaging DF17 DF17A DF17B DF17C Fitting K K Boss K K Series Name: DF17 Type
G Stacking Height: 4mm I Receptacle With metal fitting 10.0 11.5 12.5 15.0 17.5 20.0 22.5 25.0 06.8 08.3 09.3 11.8 14.3 16.8 19.3 21.8 05.5 07.0 08.0 10.5 13.0 15.5 18.0 20.5 04.5 06.0 07.0 9.5 12.0 14.5 17.0 19.5 07.0 08.5 09.5 12.0 14.5 17.0 19.5 22.0 09.8 11.3 12.3 14.8 17.3 19.8 22.3 24.8 3.5 3.0 G Stacking Height: 5mm, 7mm G Stacking Height: 6mm, 8mm A B C D E F G HNumber of ContactsCL No. 683-0002-2-51 683-0241-3-51 683-0003-5-51 683-0004-8-51 683-0005-0-51 683-0006-3-51 683-0007-6-51 683-0008-9-51 Part Number 11.5 12.5 20.0 08.3 09.3 16.8 07.0 08.0 15.5 06.0 07.0 14.5 08.5 09.5 17.0 11.3 12.3 19.8 3.0 3.0 A B C D E F G HNumber of ContactsCL No. 683-0253-2-51 683-0268-0-51 683-0361-5-51 Part Number DF17(3.0H)-26DS-0.5V(51) DF17(3.0H)-30DS-0.5V(51) DF17(3.0H)-60DS-0.5V(51) 10.0 12.5 15.0 17.5 20.0 22.5 25.0 06.8 09.3 11.8 14.3 16.8 19.3 21.8 05.5 08.0 10.5 13.0 15.5 18.0 20.5 04.5 07.0 09.5 12.0 14.5 17.0 19.5 07.0 09.5 12.0 14.5 17.0 19.5 22.0 09.8 12.3 14.8 17.3 19.8 22.3 24.8 4.5 4.0 A B C D E F G HNumber of ContactsCL No. 683-0042-7-51 683-0043-0-51 683-0044-2-51 683-0045-5-51 683-0046-8-51 683-0047-0-51 683-0048-3-51 Part Number Note 1. In regard to this product, the embossed tape packaging is the standard packaging. (1000 pcs./ reel.) If the (50) tube packaging is required, please contact HRS company. Note 2. If the without boss specification is required, please contact HRS sales department. 1.9 0.2 1.8 C Ø 0.5 4.7 P = 0.5 D E B A 0.7 H G 1.5 5.7 3.9 0.2 F A
I Receptacle Without metal fitting 1.9 0.2 1.8 C Ø 0.5 4.7 P=0.5 D E B A 0.7 H G 3.9 0.2 A 10.0 11.5 12.5 15.0 17.5 20.0 22.5 25.0 06.8 08.3 09.3 11.8 14.3 16.8 19.3 21.8 05.5 07.0 08.0 10.5 13.0 15.5 18.0 20.5 04.5 06.0 07.0 9.5 12.0 14.5 17.0 19.5 07.0 08.5 09.5 12.0 14.5 17.0 19.5 22.0 3.5 3.0 G Stacking Height: 5mm, 7mm G Stacking Height: 6mm, 8mm A B C D E G HNumber of ContactsCL No. 683-0012-6-51 683-0242-6-51 683-0013-9-51 683-0014-1-51 683-0015-4-51 683-0016-7-51 683-0017-0-51 683-0018-2-51 Part Number DF17A(3.0)-20DS-0.5V(51) DF17A(3.0)-26DS-0.5V(51) DF17A(3.0)-30DS-0.5V(51) DF17A(3.0)-40DS-0.5V(51) DF17A(3.0)-50DS-0.5V(51) DF17A(3.0)-60DS-0.5V(51) DF17A(3.0)-70DS-0.5V(51) DF17A(3.0)-80DS-0.5V(51) 11.5 12.5 20.0 08.3 09.3 16.8 07.0 08.0 15.5 06.0 07.0 14.5 08.5 09.5 17.0 3.0 3.0 G Stacking Height: 4mm A B C D E G HNumber of ContactsCL No. 683-0254-5-51 683-0269-2-51 683-0362-8-51 Part Number DF17A(3.0H)-26DS-0.5V(51) DF17A(3.0H)-30DS-0.5V(51) DF17A(3.0H)-60DS-0.5V(51) 10.0 12.5 15.0 17.5 20.0 22.5 25.0 06.8 09.3 11.8 14.3 16.8 19.3 21.8 05.5 08.0 10.5 13.0 15.5 18.0 20.5 04.5 07.0 9.5 12.0 14.5 17.0 19.5 07.0 09.5 12.0 14.5 17.0 19.5 22.0 4.5 4.0 A B C D E G HNumber of ContactsCL No. 683-0052-0-51 683-0053-3-51 683-0054-6-51 683-0055-9-51 683-0056-1-51 683-0057-4-51 683-0058-7-51 Part Number DF17A(4.0)-20DS-0.5V(51) DF17A(4.0)-30DS-0.5V(51) DF17A(4.0)-40DS-0.5V(51) DF17A(4.0)-50DS-0.5V(51) DF17A(4.0)-60DS-0.5V(51) DF17A(4.0)-70DS-0.5V(51) DF17A(4.0)-80DS-0.5V(51) Note 1.In regard to this product, the embossed tape packaging is the standard packaging. (1000 pcs./ reel.) If the (50) tube packaging is required, please contact HRS company. Note 2.If the without boss specification is required, please contact HRS sales department.
4.0 H I Header With metal fitting G Stacking Height: 5mm, 6mm G Stacking Height: 7mm, 8mm Note 1. In regard to this product, the embossed tape packaging is the standard packaging. (1000 pcs./reel.) If the (50) tube packaging is required, please contact HRS company. Note 2. If the without boss specification is required, please contact HRS sales department. 10.0 12.5 15.0 17.5 20.0 22.5 25.0 06.7 09.2 11.7 14.2 16.7 19.2 21.7 05.6 08.1 10.6 13.1 15.6 18.1 20.6 04.5 07.0 09.5 12.0 14.5 17.0 19.5 07.0 09.5 12.0 14.5 17.0 19.5 22.0 09.8 12.3 14.8 17.3 19.8 22.3 24.8 4.3 2.0 A B C D E F G HNumber of ContactsCL No. 683-0082-1-51 683-0083-4-51 683-0084-7-51 683-0085-0-51 683-0086-2-51 683-0087-5-51 683-0088-8-51 Part Number 10.0 12.5 15.0 17.5 20.0 22.5 25.0 06.7 09.2 11.7 14.2 16.7 19.2 21.7 05.6 08.1 10.6 13.1 15.6 18.1 20.6 04.5 07.0 09.5 12.0 14.5 17.0 19.5 07.0 09.5 12.0 14.5 17.0 19.5 22.0 09.8 12.3 14.8 17.3 19.8 22.3 24.8 6.3 A B C D E F GNumber of ContactsCL No. 683-0122-4-51 683-0123-7-51 683-0124-0-51 683-0125-2-51 683-0126-5-51 683-0127-8-51 683-0128-0-51 Part Number B E P = 0.5 D C 4.7 A 1.80.7 Ø 0.5 5.7 3.8 0.25 0.2 H G 1.5 1.9 F A G Stacking Height: 4mm 11.5 12.5 20.0 08.2 09.2 16.7 07.1 08.1 15.6 06.0 07.0 14.5 08.5 09.5 17.0 11.3 12.3 19.8 3.3 1.0 A B C D E F G HNumber of ContactsCL No. 683-0257-3-51 683-0272-7-51 683-0365-6-51 Part Number DF17(1.0H)-26DP-0.5V(51) DF17(1.0H)-30DP-0.5V(51) DF17(1.0H)-60DP-0.5V(51)
I Header Without metal fitting 10.0 12.5 15.0 17.5 20.0 22.5 25.0 06.7 09.2 11.7 14.2 16.7 19.2 21.7 05.6 08.1 10.6 13.1 15.6 18.1 20.6 04.5 07.0 9.5 12.0 14.5 17.0 19.5 07.0 09.5 12.0 14.5 17.0 19.5 22.0 4.3 2 G Stacking Height: 5mm, 6mm G Stacking Height: 7mm, 8mm A B C D E G HNumber of ContactsCL No. 683-0092-5-51 683-0093-8-51 683-0094-0-51 683-0095-3-51 683-0096-6-51 683-0097-9-51 683-0098-1-51 Part Number DF17A(2.0)-20DP-0.5V(51) DF17A(2.0)-30DP-0.5V(51) DF17A(2.0)-40DP-0.5V(51) DF17A(2.0)-50DP-0.5V(51) DF17A(2.0)-60DP-0.5V(51) DF17A(2.0)-70DP-0.5V(51) DF17A(2.0)-80DP-0.5V(51) 10.0 12.5 15.0 17.5 20.0 22.5 25.0 06.7 09.2 11.7 14.2 16.7 19.2 21.7 05.6 08.1 10.6 13.1 15.6 18.1 20.6 04.5 07.0 9.5 12.0 14.5 17.0 19.5 07.0 09.5 12.0 14.5 17.0 19.5 22.0 6.3 4 A B C D E G HNumber of ContactsCL No. 683-0132-8-51 683-0133-0-51 683-0134-3-51 683-0135-6-51 683-0136-9-51 683-0137-1-51 683-0138-4-51 Part Number DF17A(4.0)-20DP-0.5V(51) DF17A(4.0)-30DP-0.5V(51) DF17A(4.0)-40DP-0.5V(51) DF17A(4.0)-50DP-0.5V(51) DF17A(4.0)-60DP-0.5V(51) DF17A(4.0)-70DP-0.5V(51) DF17A(4.0)-80DP-0.5V(51) Note 1. In regard to this product, the embossed tape packaging is the standard packaging. (1000 pcs./reel.) If the (50) tube packaging is required, please contact HRS company. Note 2. If the without boss specification is required, please contact HRS sales department. B E P = 0.5 D C 4.7 A 1.80.7 Ø 0.5 3.8 0.25 0.2 H G 1.9 A G Stacking Height: 4mm 11.5 12.5 20.0 08.2 09.2 16.7 07.1 08.1 15.6 06.0 07.0 14.5 08.5 09.5 17.0 3.0 3.0 A B C D E G HNumber of ContactsCL No. 683-0258-6-51 683-0273-0-51 683-0366-9-51 Part Number DF17A(1.0H)-26DP-0.5V(51) DF17A(1.0H)-30DP-0.5V(51) DF17A(1.0H)-60DP-0.5V(51)
S Receptacle 4.3 Header 4 .0 I PCB mounting pattern with Metal Fitting G Receptacle G Header Number of Contacts DEJK 20 04.5 07.0 10.4 07.6 30 07.0 09.5 12.9 10.1 40 09.5 12.0 15.4 12.6 50 12.0 14.5 17.9 15.1 60 14.5 17.0 20.4 17.6 70 17.0 19.5 22.9 20.1 80 19.5 22.0 25.4 22.6 * The recommended solder paste thickness is 150µm. Note 1. If the pattern is included in the shaded area, and not treated with resist, it could touch the connector contact. Note 2. If the boss isn't included, the boss hole shown in the above figure isn't required. Ø 0.6 +0.050 S 0 _0.05 6.3+0.1 1.9±0.02 P =0.5±0.02 D ±0.03 E±0.03 K 0 _0.1 J+0.1 0.25±0.02 2.1+0.1
S Receptacle 4.3 Header 4 .0 Note 1. If the pattern is included in the shaded area, and not treated with resist, it could touch the connector contact. Note 2. If the boss isn't included, the boss hole shown in the above figure isn't required. I PCB mounting pattern without Metal Fitting G Receptacle G Header Number of Contacts DE 20 04.5 07.0 30 07.0 09.5 40 09.5 12.0 50 12.0 14.5 60 14.5 17.0 70 17.0 19.5 80 19.5 22.0 Ø 0.6 +0.050 S 0 _0.05 6.3 +0.1 P =0.5±0.02 D ±0.03 E±0.03 1.9±0.02 0.25±0.02 * The recommended solder paste thickness is 150µm.
G Embossed Carrier Tape Dimensions I Receptacle Connector LNPQR Connector LMNPQR Connector LNPQR Connector LMNPQR G Reel Dimensions 1.75±0.1 Ø1.5 +0.10 12±0.1 2±0.1 4±0.1 L±0.1 M±0.1 N±0.3 0.2±0.05 R0.75 +0.15 R0.75 +0.150 0.3±0.1 P±0.15 Unreeling direction Y-YY X Y X-X X Ø13±0.2 Ø21±0.8 2±0.5 (Ø 80 ) ØR±2 2±0.5 Q+2 Product name label Ø1.5 Lead hole depth
1.75±0.1 Ø1.5 +0.10 12±0.1 2±0.1 4±0.1 L±0.1 M±0.1 N±0.3 0.2±0.05 R0.75 +0.150 R0.75 +0.150 0.3±0.1 P±0.15 Unreeling direction Y X Y X Y-Y X-X Ø13±0.2 Ø21±0.8 2±0.5 (Ø 80 ) ØR±2 2±0.5 Q+2 Product name label Ø1.5 Lead hole depth
250ç 200ç 150ç 100ç 50ç 0SSEC 50SSEC 100SSEC 150SSEC 200SSEC Time Soldering areaPreheating area 240ç max. 220ç Temperature Preheating area IR reflow condition 150ç for 100 to 120 seconds 235ç5ç for 10 seconds max. 220ç min for 10 to 30 seconds Soldering area A330 I Precautions I The header is designed in a structure where contacts are exposed. Touching it with bare hands would cause contact failure or electrostatic element damage. I Where no board is mounted, the insertion or extraction will cause damage or contact deformation. I Avoid retaining the board with the connector only, and fix the board by any other means than the connector. I Excessive scoop insertion or extraction may result in damage. I In the manual soldering process, don't carry out the flux coating which will cause a flux blister on the connector. I The color phase of this product may be slightly different from that of the formed product according to the manufacturing lot. However, the difference doesn't affect the performance. Soldering iron temperature: 290±10çoldering time: Within 2 seconds 0.15mm Max 0.2mm in the connector center area, based on the both connector edges Refer to the "Nylon Connector Use Hand book". Note 1. Maximum twice action is allowed under the same condition. However, the interval between the first and second actions must be maintained at the room temperature. Note 2.The temperature indicates the board surface temperature of the connector lead area. 1. Recommended Temperature Profile (SMT) 6. Cautions 2. Recommended Manual Soldering Condition (SMT) 3. Recommended Screen Thickness (SMT) 4. Board Warp(SMT) 5. Cleaning Condition