DF14

DF14 HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

1.25mm Pitch Super Low profile Crimping Connector DF14 Series I Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height: 2.5mm A signal can be fetched from the area where there is no board to board space. (Refer to fig.1) Offset type is available. Board mounting height: 1.6mm (Refer to fig.2) 2. Correspond to Automatic Mounting The header has the vacuum mount face which enables the vacuum absorption and the automatic mounting by the embossed tape packaging.In addition, the tube packaging can be selected. 3. Four Wall Type Without Friction to Board by Socket The header has the box structure to prevent from being twisted and has the perfect mis-insertion prevention method. Moreover the header has the wall on the board side and doesn't have any trouble resulted from the friction to board by socket. In addition, the metal fitting is attached to prevent the solder peel. I Applications LCD, Note PC, Mobile Terminal Small business equipment, Video camera Board Mounting Figure DF14(A) (7.3) (1) (1.6) (2.4) Board Mounting Figure fig.2DF14H fig.1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

DF14 SeriesG 1.25mm Pitch Super Low profile Crimping Connector G Contact Applicable cable size 2628: AWG26 to 28 3032: AWG30 to 32 Packaging Type SCF: Socket contact/reel Plating Type Blank: Tin plated A: Gold plated DF14 - 2628 SCF A 1 2 3 I Product Specifications Current rating 1A Voltage rating 150V AC Operating Temperature Range -35 to +85ç (Note 1) Operating Moisture Range 40 to 80% Storage Temperature Range -10 to +60ç (Note 2) Storage Moisture Range 40 to 70% (Note 2) Item Specification Condition 1. Insulation Resistance 500Mohms Min 100V DC 2. Withstanding voltageNo flashover or insulation breakdown. 500V AC/1 minute 3. Contact Resistance 30mohms Max 100mA 4. Insertion/Extraction ForceMIN0.15N (15gf), MAX3N (300gf) Measure at the square steel pin of 0.3 ±0.002mm 5. Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6. Humidity (Steady state) Contact resistance: 30m ohms Max Insulation resistance:500Mohms Min 96 hours at temperature of 40ç and humidity of 90% to 95% 7. Temperature Cycle Contact resistance: 30mohms Max Insulation resistance: 500Mohms Min (-25ç: 30 minutes➝ 5 to 35ç: 10 minutes➝ 85ç: 30 minutes➝ 5 to 35ç: 10 minutes) 5 cycles 8. Durability (Mating/un-mating)Contact resistance: 30mohms Max Tin plating: 30 cycles Gold plating: 50 cycles 9. Resistance to Soldering heat No deformation of components affecting performance. Reflow: At the recommended temperature profile Manual soldering: 300ç for 3 seconds Rating Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature R ange and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. I Material Product Part Material Finish Remarks Crimping Socket Insulator Polyamide Beige UL94V-0 Crimping Contact for Socket Contact Phosphor Copper Tin-copper plated or gold plated ––––––– Insulator Polyamide Beige UL94V-0 Pin Header Contact Brass Tin-copper plated or gold plated ––––––– Fitting Phosphor copper Tin-copper plated ––––––– I Ordering Information G Connector Series Name: DF14 Blank: Standard, with boss A: on-board, without boss H: offset Number of Contacts: 2 to 10, 15, 20, 25, 30 Connector Type S: Single row socket P: Single row pin header Contact Pitch: 1.25mm Contact Type C: Crimping socket H: Right angle SMT DF 14 # - * S - 1.25 C 32 4 5 6 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

DF14 SeriesG 1.25mm Pitch Super Low profile Crimping Connector I Crimping Socket KApplicable Cable (Tin plating Annealed copper wire) Conductor Size (Wire construction) Jacket Diameter AWG26(7 cores/0.16mm) AWG28(7 cores/0.127mm) Ø0.54to Ø1mmAWG30(7 cores/0.1mm) AWG32(7 cores/0.08mm) KRecommended Cable UL1571 KStrip Length 1.2 to 1.9mm BApplicable Crimping Tool Note:If other cables are used instead of the applicable cable, contact Hirose sales department. Type Part Number CL No. Applicable Contact Applicator AP105-DF14-2628S 901-4548-1 DF14-2628SCF/SCFA AP105-DF14-3032S 901-4544-0 DF14-3032SCF/SCFA Manual Crimping Tool DF14-2628/CR-HT 550-0261-1 DF14-2628SCF/SCFA DF14-3032/CR-HT 550-0262-4 DF14-3032SCF/SCFA Note 1.If a trouble has occurred due to tools, which are not designated by Hirose, Hirose won't guarantee any product. Note 2.Use the reel contact sequentially cut for manual crimping tool. Part Number CL No. Packaging Type Quantity Finish RoHS DF14-2628SCF 538-0001-7- Reel Tin platedDF14-3032SCF 538-0003-2- Reel 10,000 YesDF14-2628SCFA 538-0002-0- Reel Gold platedDF14-3032SCFA 538-0004-5- Reel I Socket Crimping Contact Note 1.The quantity is delivered per bag(100 pcs). If needed, please order the products per bag. Part Number CL No. Number of Contacts A B RoHS DF14- 2S-1.25C 538-0005-8 2 4.45 1.25 DF14- 3S-1.25C 538-0006-0 3 5.70 2.50 DF14- 4S-1.25C 538-0007-3 4 6.95 3.75 DF14- 5S-1.25C 538-0008-6 5 8.20 5.00 DF14- 6S-1.25C 538-0009-9 6 9.45 6.25 DF14- 7S-1.25C 538-0010-8 7 10.70 7.50 DF14- 8S-1.25C 538-0011-0 8 11.95 8.75 Yes DF14- 9S-1.25C 538-0013-6 9 13.20 10.00 DF14-10S-1.25C 538-0014-9 10 14.45 11.25 DF14-15S-1.25C 538-0054-3 15 20.70 17.50 DF14-20S-1.25C 538-0059-7 20 26.95 23.75 DF14-25S-1.25C 538-0064-7 25 33.20 30.00 DF14-30S-1.25C 538-0012-3 30 39.45 36.25 Unit: mm Photo: Contact insertion state The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

DF14 SeriesG 1.25mm Pitch Super Low profile Crimping Connector With boss Without boss Part Number CL No. Part Number CL No. ABCD Note 1.Please order the tube packaging product, multiplying the packaging quantity (pcs.). Note 2.Please order the embossed tape packaging product according to reel number. (1000 pcs./reel) Unit: mm (25): Tin-copper plated tube packaging (26): Tin-copper plated embossed tape packaging (55): Gold plated tube packaging (56): Gold plated embossed tape packaging BPCB mounting pattern BTube Packaging Dimensions I Right Angle Pin Header (SMT) Note 1."Without boss" indicates the style with no boss. Note 2."Without boss" indicates that no hole is needed. Tube Packaging Quantity Number of Contacts RoHS Yes The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

DF14 SeriesG 1.25mm Pitch Super Low profile Crimping Connector Note 1.Please order the embossed tape packaging product according to reel number. (1000 pcs./reel) (56): Gold plated embossed tape packaging BPCB mounting pattern I Right Angle Pin Header (Offset, SMT) B C P=1.25 A 0.3 2.4 5.7 1.60.8 Contact No. 1 P=1.25±0.05 A±0.05 D+0.2 0(0.5) 1.3+0.2 3.6±0.1 (0.3) (0.4) 0.7±0.05 Unit: mm Part Number CL No. DF14H-02P-1.25H() DF14H-20P-1.25H() DF14H-30P-1.25H() 538-0177-3- 538-0167-0- 538-0188-0- 1.25 23.75 36.25 Number of Contacts A 6.8 29.3 41.8 B 10.1 32.6 45.1 7.2 29.7 42.2 Yes C D RoHS The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

DF14 SeriesG 1.25mm Pitch Super Low profile Crimping Connector BEmbossed Carrier Tape Dimensions (JIS-C-0806) I 2 to 10 Contacts I 15, 20, 25, 30 Contacts Inserted Connector Number of Contacts A B C D DF14/14A- 2P-1.25H 2 16 7.5 16.4 ––– DF14/14A- 3P-1.25H 3 16 7.5 16.4 ––– DF14/14A- 4P-1.25H 4 24 11.5 24.4 ––– DF14/14A- 5P-1.25H 5 24 11.5 24.4 ––– DF14/14A- 6P-1.25H 6 24 11.5 24.4 ––– DF14/14A- 7P-1.25H 7 24 11.5 24.4 ––– DF14/14A- 8P-1.25H 8 24 11.5 24.4 ––– DF14/14A- 9P-1.25H 9 24 11.5 24.4 ––– DF14/14A-10P-1.25H 10 24 11.5 24.4 ––– DF14/14A-15P-1.25H 15 44 20.2 44.4 40.4 DF14/14A-20P-1.25H 20 44 20.2 44.4 40.4 DF14/14A-25P-1.25H 25 56 26.2 56.4 52.4 DF14/14A-30P-1.25H 30 56 26.2 56.4 52.4 Unit: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

DF14 SeriesG 1.25mm Pitch Super Low profile Crimping Connector BEmbossed Carrier Tape Dimensions (JIS-C-0806) DF14H-*P- 1.25H I 2 Contacts I 20, 30 Contacts Inserted Connector Number of Contacts A B C D DF14H- 2P-1.25H 2 24 11.5 24.4 ––– DF14H- 20P-1.25H 20 44 20.2 44.4 40.4 DF14H- 30P-1.25H 30 56 26.2 56.4 52.4 Unit: mm 0.3±0.1 +0.1 0 Unreeling direction B — B C — C B B C C 12±0.1 2±0.1 4±0.1 1.75±0.1 A±0.3 B±0.1 (3) Ø1.5 Unreeling direction 0.3±0.1 (3) 12±0.1 2±0.1 4±0.1 1.75±0.1B±0.1 D±0.1 A±0.3 Ø1.5 +0.1 0 (Ø80) Ø330±2 Product name label 2±0.5 Ø21±0.8 Ø13± 0.5 C+2 (C+6)MAX Ø1.5 Lead hole depth A The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

DF14 SeriesG 1.25mm Pitch Super Low profile Crimping Connector 1. Recommended Temperature Profile (SMT) Note 1.Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2.The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals. 2. Recommended Manual Soldering Condition (SMT) Manual soldering: 290ç for 2 seconds 3. Recommended Screen Thickness (SMT) 0.15 to 0.2mm 4. Board Sled (SMT) Max 0.03mm at the connector center area, based on both connector edges 5. Cleaning Condition Refer to Nylon Connector Use Hand book. 6. Connection Condition Refer to Nylon Connector Use Hand book. I Be careful to carry out the crimping operation according to the "Crimping Condition Sheet" and "Crimping Quality Reference", because the crimping contact style is too small. 7. Precautions Refer to Nylon Connector Use Hand book. 8. Cautions I Be careful for an excessive scoop insertion/extraction, which will cause damage to the product. BPrecautions BPrecautions DiagonalParallel DiagonalParallel DiagonalParallel DiagonalParallel 100ç 150ç 200ç 250ç Max. 240 220 Time Temperature 10s max. 60 to 120s Preheating 60s max. Soldering IR reflow condition Preheating area 150ç for 60 to 120 seconds Soldering area 250 for 10 seconds max. 220ç min. 60 seconds max. Precautions at Time of Insertion Precautions at Time of Disconnection Handling Method: Lightly grasping the base of the cable, press the connector with your finger and insert it. Handling Method: Grasp the cable so that the entire cable is pulled evenly and pull it out. Insertion Angle [Caution] Do not insert at an angle of 30° or greater. Doing so will cause contact deformation or case damage. Method: Insert with the connector parallel. Angle of Removal [Caution] Do not remove at an angle of 30° or greater. Doing so will cause contact deformation or case damage. Method: Remove with the connector parallel. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Powered by TCPDF (www.tcpdf.org) Powered by TCPDF (www.tcpdf.org)