DF1-14S-2.5R26

DF1-2S-2.5R24 HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

2.5mm Pitch Connector for Discrete Wire Connection DF1 Series I Features 1. Board Mounting Height (Crimping Type) 10mm 2.5mm pitch connector achieves the low profile. 2. Insulation Displacement Area Protected by Protector (ID Type) The connector is structured to protect the insulation displacement connection area by the protector. Therefore, the connector has a strong tensile strength against the cable and prevents dusts. 3. Easy Connection by Easy Tool (ID Type) No expensive insulation displacement machine is needed. The connection can be established only by mating the cable into the protector and fastening it with the ID tool. 4. Intermediate Connection Possible (ID Type) For intermediate connection, the connector allows signal extraction during cabling. [Intermediate Connection] I Applications FA equipment, measurement equipment

(Note1) Voltage rating AWG 24 : 3A Cable Size AWG 26 : 2A AWG 28 : 1A 250V AC Storage Temperature Range Storage Moisture Range Operating Temperature Range Operating Moisture Range -10to +60ç (Note3) -40 to 70% (Note3) -30to +85ç (Note2) -40 to 80% Item Specification Condition 1. Insulation Resistance 1000Mohms Min 500V DC 2. Withstanding voltageNo flashover or insulation breakdown. 650V AC/1 minute 3. Contact Resistance 30mohms Max 100mA 5. Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6. Moisture ResistanceContact resistance: 30mohms Max Insulation resistance: 1000Mohms Min 96 hours at temperature of 40ç and humidity of 90% to 95% 7. Temperature Cycle Contact resistance: 30mohms max.Insulation resistance: 1000Mohms min. (-55ç: 30 minutes ➝ 15~35ç: 2to 3 minutes➝ (-85ç: 30 minutes ➝ 15~35ç: 2 to 3 minutes) 5 cycles 8. Durability (Mating/un-mating)Contact resistance: 30mohms max. Tin plating: 30 cycles 9. Resistance to Soldering heat No deformation of components affecting performance. Flow: 250ç for 10 seconds Manual soldering: 300ç for 3 seconds Rating I Material Product Part Material Finish Remarks Crimping Socket Insulator Polyamide Light Brown UL94V-0 Crimping Contact Contact Phosphor copper Tin plated ––––– ID Socket Insulator Polyamide Light Brown UL94V-0 Contact Phosphor copper Tin plated ––––– Pin Header Insulator Polyamide Light Brown UL94V-0 Contact Phosphor copper Tin plated ––––– Note 1. The rated current will be changed according to cable sizes for use. For the header only, the rating is 3A. Note 2: Includes temperature rise caused by current flow. Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature R ange and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note:Hirose's tin-plated products takes measures against whisker. I Ordering Information G Connector G Protector DF1 - * S - 2.5 C q w er t DF1 - * A 1.05 qw e q Series Name : DF1 w Number of Contact : 2 to 16, 20 e Connector Type S: Socket P: Pin Header r Contact Pitch : 2.5mm t Contact Type C : Crimping socket R24 : AWG24 ID socket R26 : AWG26 ID socket R28 : AWG28 ID socket DSA : Straight through hole DS : Right angle through hole q Number of Contact : 2to 16, 20 w Connector Type A: Discrete wire e Cable Clamp Size 1.05: UL1007 AWG26, 28 1.33: UL1007 AWG24 G Contact DF1 - 2428SCF qw q Applicable Cable Size 2428: AWG 24 to 28 w Packaging Type SCF : Socket contact, reel SC : Socket contact, bag

I ID Socket (Open End Type) G Applicable Cable G AWG24 Cable Socket Size (Triangle Mark: Green) Note:A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. (Tin plated annealing copper wire) Unit: mm Part Number CL No. DF1-2S-2.5R24 DF1-3S-2.5R24 DF1-4S-2.5R24 DF1-5S-2.5R24 DF1-6S-2.5R24 DF1-7S-2.5R24 DF1-8S-2.5R24 DF1-9S-2.5R24 541-0039-2 541-0040-1 541-0041-4 541-0042-7 541-0043-0 541-0044-2 541-0045-5 541-0046-8 10.5 15.5 20.5 25.5 2.5 7.5 12.5 17.5 Number of Contacts A B Part Number CL No. DF1-10S-2.5R24 DF1-11S-2.5R24 DF1-12S-2.5R24 DF1-13S-2.5R24 DF1-14S-2.5R24 DF1-15S-2.5R24 DF1-16S-2.5R24 DF1-20S-2.5R24 541-0047-0 541-0048-3 541-0049-6 541-0050-5 541-0051-8 541-0052-0 541-0053-3 541-0057-4 30.5 35.5 40.5 22.5 27.5 32.5 37.5 47.5 Number of Contacts A B G AWG26 Cable Socket Size (Triangle Mark: Light Blue) Unit: mm Part Number CL No. DF1-2S-2.5R26 DF1-3S-2.5R26 DF1-4S-2.5R26 DF1-5S-2.5R26 DF1-6S-2.5R26 DF1-7S-2.5R26 DF1-8S-2.5R26 DF1-9S-2.5R26 541-0058-7 541-0059-0 541-0060-9 541-0061-1 541-0062-4 541-0063-7 541-0064-0 541-0065-2 10.5 15.5 20.5 25.5 2.5 7.5 12.5 17.5 Number of Contacts A B Part Number CL No. DF1-10S-2.5R26 DF1-11S-2.5R26 DF1-12S-2.5R26 DF1-13S-2.5R26 DF1-14S-2.5R26 DF1-15S-2.5R26 DF1-16S-2.5R26 DF1-20S-2.5R26 541-0066-5 541-0067-8 541-0068-0 541-0069-3 541-0070-2 541-0071-5 541-0072-8 541-0076-9 30.5 35.5 40.5 22.5 27.5 32.5 37.5 47.5 Number of Contacts A B G AWG28 Cable Socket Size (Triangle Mark: Red) Unit: mm Part Number CL No. DF1-2S-2.5R28 DF1-3S-2.5R28 DF1-4S-2.5R28 DF1-5S-2.5R28 DF1-6S-2.5R28 DF1-7S-2.5R28 DF1-8S-2.5R28 DF1-9S-2.5R28 541-0115-9 541-0116-1 541-0117-4 541-0118-7 541-0119-0 541-0120-9 541-0121-1 541-0122-4 10.5 15.5 20.5 25.5 2.5 7.5 12.5 17.5 Number of Contacts A B Part Number CL No. DF1-10S-2.5R28 DF1-11S-2.5R28 DF1-12S-2.5R28 DF1-13S-2.5R28 DF1-14S-2.5R28 DF1-15S-2.5R28 DF1-16S-2.5R28 DF1-20S-2.5R28 541-0123-7 541-0124-0 541-0125-2 541-0126-5 541-0127-8 541-0128-0 541-0129-3 531-0133-0 30.5 35.5 40.5 22.5 27.5 32.5 37.5 47.5 Number of Contacts A B Part Number Applicable Cable Jacket Diameter DF1-*S-2.5R24 UL1007 AWG24(11 pieces/0.16mm) 1.35to 1.45mm DF1-*S-2.5R26 UL1007 AWG26( 7 pieces/0.16mm) 1.25to 1.35mm DF1-*S-2.5R28 UL1007 AWG28( 7 pieces/0.127mm) 1.15to 1.25mm Note:This convex portion is located (2 contacts: the center at one point)(3 to 6 contacts: as shown in the illustration)(more than 7 contacts: one center at one point added to the above illustration).

Note:A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. G AWG24 Cable Protector Size G AWG26, 28 Cable Protector Size Unit: mmUnit: mm Part Number CL No. DF1- 2A1.33 DF1- 3A1.33 DF1- 4A1.33 DF1- 5A1.33 DF1- 6A1.33 DF1- 7A1.33 DF1- 8A1.33 DF1- 9A1.33 DF1-10A1.33 DF1-11A1.33 DF1-12A1.33 DF1-13A1.33 DF1-14A1.33 DF1-15A1.33 DF1-16A1.33 DF1-20A1.33 541-0077-1 541-0078-4 541-0079-7 541-0080-6 541-0081-9 541-0082-1 541-0083-4 541-0084-7 541-0085-0 541-0086-2 541-0087-5 541-0088-8 541-0089-0 541-0090-0 541-0091-2 541-0095-3 12.5 17.5 22.5 27.5 32.5 37.5 42.5 2.5 7.5 12.5 17.5 22.5 27.5 32.5 37.5 47.5 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 Number of Contacts A B C Part Number CL No. DF1- 2A1.05 DF1- 3A1.05 DF1- 4A1.05 DF1- 5A1.05 DF1- 6A1.05 DF1- 7A1.05 DF1- 8A1.05 DF1- 9A1.05 DF1-10A1.05 DF1-11A1.05 DF1-12A1.05 DF1-13A1.05 DF1-14A1.05 DF1-15A1.05 DF1-16A1.05 DF1-20A1.05 541-0096-6 541-0097-9 541-0098-1 541-0099-4 541-0100-1 541-0101-4 541-0102-7 541-0103-0 541-0104-2 541-0105-5 541-0106-8 541-0107-0 541-0108-3 541-0109-6 541-0110-5 541-0114-6 12.5 17.5 22.5 27.5 32.5 37.5 42.5 2.5 7.5 12.5 17.5 22.5 27.5 32.5 37.5 47.5 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 Number of Contacts A B C Protector Type Applicable Jacket Diameter Recommended Cable DF1-*A1.33 Ø1.35to Ø1.45 UL1007 AWG24 DF1-*A1.05 Ø1.1to Ø1.35 UL1007 AWG26 28 Select the protector after inspecting the cable jacket diameter for use. *indicates contact No. Note 1.Product contact No. mark, however 2 and 3 contacts are not indicated. Note 2.Round hole to distinguish the protector A1.05 and 1.33 (DF1-*A1.05 only)

I Crimping Contact for Socket Note:A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Unit: mm Part Number CL No. DF1- 2S-2.5C DF1- 3S-2.5C DF1- 4S-2.5C DF1- 5S-2.5C DF1- 6S-2.5C DF1- 7S-2.5C DF1- 8S-2.5C DF1- 9S-2.5C DF1-10S-2.5C 541-0136-9 541-0137-1 541-0138-4 541-0139-7 541-0140-6 541-0141-9 541-0142-1 541-0143-4 541-0144-7 10.5 15.5 20.5 25.5 2.5 7.5 12.5 17.5 22.5 Number of Contacts A B Part Number CL No. DF1-11S-2.5C DF1-12S-2.5C DF1-13S-2.5C DF1-14S-2.5C DF1-15S-2.5C DF1-16S-2.5C DF1-18S-2.5C DF1-20S-2.5C 541-0145-0 541-0146-2 541-0147-5 541-0148-8 541-0149-0 541-0150-0 541-0152-5 541-0154-0 30.5 33.5 40.5 27.5 32.5 37.5 42.5 47.5 Number of Contacts A B Note1:This convex portion is located (2 contacts: the center at one point)(3 to 6 contacts: as shown in the illustration)(more than 7 contacts: one center at one point added to the above illustration). Note 2.The terminal number indicates all contact numbers. 1.85 5.9 0.9 0.6 1.5 2.2 Ø 1.5 6.5 1.5 1.5 2.5 2.2 1.9 /;/;/; /; /; /; /;/;/; Photo: Contact Inserted. Conductor Size (wire construction) Jacket Diameter AWG24 (11 cores/0.16mm) AWG26 ( 7 cores/0.16mm) Ø0.9to Ø1.5mm AWG28 (07 cores/1.24mm) G Applicable Cable (Tin Plated Annealing Copper Wire) G Recommended Cable UL1061, UL1007 G Strip Length 1.6to 2.1mm Note:If other cables are used instead of the applicable cable, contact Hirose sales department. BApplicable Crimping Tool Type Part Number CL No. Applicable Contact Applicator AP105-DF1-2428S 901-4538-8 DF1-2428SCF Manual Crimping Tool DF1-T2428S 550-0102-8 DF1-2428SC Extraction Tool DF1-C-PO 550-0177-7 DF1-2428SCF Note:If a trouble has occurred due to tools which are not designated by Hirose, Hirose won't guarantee any product. Part Number CL No. Packaging Type Number of Contacts Finish DF1-2428SCF 541-0134-3 Reel 10000 Tin platingDF1-2428SC 541-0135-6 Bag 100

I Pin Header Right Angle Type Note 1.A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note 2.The socket applicable to the 18 contact connector is only crimping type. Unit: mm Part Number CL No. DF1- 2P-2.5DS DF1- 3P-2.5DS DF1- 4P-2.5DS DF1- 5P-2.5DS DF1- 6P-2.5DS DF1- 7P-2.5DS DF1- 8P-2.5DS DF1- 9P-2.5DS DF1-10P-2.5DS 541-0020-4 541-0021-7 541-0022-0 541-0023-2 541-0024-5 541-0025-8 541-0026-0 541-0027-3 541-0028-6 7.5 12.5 17.5 22.5 27.5 3.8 6.3 8.8 11.3 13.8 16.3 18.8 21.3 23.8 2.5 7.5 12.5 17.5 22.5 Number of Contacts A B C Part Number CL No. DF1-11P-2.5DS DF1-12P-2.5DS DF1-13P-2.5DS DF1-14P-2.5DS DF1-15P-2.5DS DF1-16P-2.5DS DF1-18P-2.5DS DF1-20P-2.5DS 541-0029-9 541-0030-8 541-0031-0 541-0032-3 541-0033-6 541-0034-9 541-0036-4 541-0038-0 32.5 37.5 42.5 47.5 52.5 26.3 28.8 31.3 33.8 36.3 38.8 43.8 48.8 27.5 32.5 37.5 42.5 47.5 Number of Contacts A B C G Board Through-hole Diameter : ø1.1+0 +0.1 I Pin Header Straight Type Note 1.A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note 2.The socket applicable to the 18 contacts connector is only crimping type. Unit: mm Part Number CL No. DF1- 2P-2.5DSA DF1- 3P-2.5DSA DF1- 4P-2.5DSA DF1- 5P-2.5DSA DF1- 6P-2.5DSA DF1- 7P-2.5DSA DF1- 8P-2.5DSA DF1- 9P-2.5DSA DF1-10P-2.5DSA 541-0001-0 541-0002-2 541-0003-5 541-0004-8 541-0005-0 541-0006-3 541-0007-6 541-0008-9 541-0009-1 7.5 12.5 17.5 22.5 27.5 3.8 6.3 8.8 11.3 13.8 16.3 18.8 21.3 23.8 2.5 7.5 12.5 17.5 22.5 Number of Contacts A B C Part Number CL No. DF1-11P-2.5DSA DF1-12P-2.5DSA DF1-13P-2.5DSA DF1-14P-2.5DSA DF1-15P-2.5DSA DF1-16P-2.5DSA DF1-18P-2.5DSA DF1-20P-2.5DSA 541-0010-0 541-0011-3 541-0012-6 541-0013-9 541-0014-1 541-0015-4 541-0017-0 541-0019-5 32.5 37.5 42.5 47.5 52.5 26.3 28.8 31.3 33.8 36.3 38.8 43.8 48.8 27.5 32.5 37.5 42.5 47.5 Number of Contacts A B C G Board Through-hole Diameter : ø1.1+0 +0.1

Part Number CL No. Height Width Depth Weight DF1 Connection Press HP513 550-0134-4 200mm 260mm 250mm 3.7kg Protector Type Applicable Jacket DiameterRecommended Cable DF1-*A1.33 Ø1.35to Ø1.45 UL1007 AWG24 DF1-*A1.05 Ø1.1to Ø1.35 UL1007 AWG26, 28 Part Number CL No. DF1 Cable Crimper 550-0130-3 BDF1 Connection Press BDF1 Cable Crimper BPrecautions 1. Recommended Soldering ConditionFlow: 250ç for 3 seconds Manual soldering: 290ç for 2 seconds 2. Cleaning Condition Refer to Nylon Connector Use Hand book. 3. Connection Condition [Crimping] Refer to Nylon Connector Use Hand book. [ID] G For the insulation displacement tool, set a set of connector per insulation displacement. If more than 2 connectors have been set, they interrupt each other, which will cause an insulation displacement failure. G After the insulation displacement, make sure that the locks on both protector sides are completely activated. Note:The intermediate connection can be established by removing the cable cuttingblade of this press machine. Note:Select a protector after inspecting a cable Jacket diameter for use. * indicates contact No. Used to install the cable in the protector. DF1 Connection Press HP513 DF1 Cable Crimper